Thick Film Radial Lead Slim-Mox High Voltage Dividers Precision Thick Film Planar A p p l i c at i o n s • HV power supplies • Medical instrumentation • Current pulse limiters • Ionization chambers • High dielectric & low outgassing epoxy coating • Low resistor noise • Non inductive • RoHS compliant • Radial terminals Ohmite’s Slim-Mox provides stable performance for a wide range of resistance values, with voltage ratings up to 25K. Low temperature coefficients are available for high stability circuit applications. The space-saving planar package offers and alternative to traditional high voltage resistors. characteristics Resistor Element Thick film on Alumina Coating Epoxy or Silicone Terminals RoHS solder composition is 96% Sn, 3.5% Ag, 0.5% Cu Resistance Range 100 Ohms to 5,000M Power Rating 0.25W to 5.5W Voltage Rating 1.5KV to 25KV Tolerance 0.5% to 20%; not all tolerances available in all values Operating -55°C to +110°C Temperature Temperature See table Coefficient Contact Ohmite for custom configurations. *Maximum voltage and power rating determined by Ohm’s law: P=V2/R dimensions in./mm 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • [email protected]

Thick Film Radial Lead Slim-Mox Divider High Voltage Dividers Precision Thick Film Voltage Multiple taps are provided on the Slim-Mox RD for use in advanced circuit designs. Tight ratio tolerances make these resistors ideal for precision applications requiring consistent performance. • Custom configurations are available. Contact Ohmite with your specifications • RoHS compliant characteristics Resistance range 1M to 5,000M ohms Max. Ratio 5000 : 1 A complete description of the SLIM-MOX Divider is required. EXAMPLE: RT = 500MΩ 5% R1 = 499.5MΩ 5% R2 = 500KΩ 1% Ratio = RT / R2 = 1,000: 1, 1% To...

Thick Film Radial Lead High Voltage Dividers High Temperature Thick Film Precision The Slim-Mox HT provides a higher power rating for high ambient temperature environments. Appropriate for mounting near heat generating components. The Slim-Mox HT is finished with a rugged silicone coating suitable for most environments. S e r i e s S p e c i f i c at i o n s • HV power supplies • Medical instrumentation • Current pulse limiters • Ionization chambers F e at u r e s • Outstanding voltage coefficient • High temperature silicone coating • Low resistor noise • Noninductive • Custom configurations...

Thick Film Radial Lead Slim-Mox HT Divider High Voltage Dividers High Temperature Thick Film Voltage Divider F e at u r e s • High Temperature Operation • RoHS compliant • Radial Terminals Slim-Mox HT RD resistor dividers complete the SlimMox family with the high temperature divider configuration. These resistors are useful wherever multiple voltage drops are needed in a circuit. Designed to customer specifications, the Slim-Mox HT RD resistor utilizes our thick film on alumina technology to offer flexible termination schemes. characteristics Resistance range 1M to 5,000M ohms Max. Ratio 5000...

Thick Film Radial Lead Slim-Mox High Voltage Dividers T e m p e r a t u r e / V o lt a g e C o e ff i c i e n t s o f R e s i s t a n c e Temp. Coeff. of Resistance* 0°C-85°C 85°C-125°C 25 PPM/°C 50 PPM/°C 100 PPM/°C Resistor Series Voltage Coeff. of Resistance** < 2PPM/Volt < 5PPM/Volt *TCR of 25ppm for temperature range of 0°C-85°C. TCR of 50ppm and 100ppm for -55°C to 125°C. Consult factory for TCR values operating higher than 125°C **VC’s of <2PPM/Volt are available. Contact Ohmite with your requirement. Test Method Dielectric Withstanding Voltage MIL-STD-202, Method 301, 750V Insulation...