Surface Mount Power Standard pedestal mount Recessed-base mount RC Series: carbon composition (1/4 & 1/2 watt) RC Series: ceramic composition (above 1/2 watt) RF Series: metal film RW Series: wirewound RP Series: power film RM Series: high voltage thick film Flexible J-bend • Tolerance 1%, 5%, 10%, depending on construction • Twelve wattage ratings • Seven package sizes • Two mounting designs to accommodate your soldering process • Five power resistor technologies to optimize your operating performance: 1. Carbon and Ceramic composition for surge and low inductance 2. Metal film for high ohmic value and low T.C. 3. Wire element for inrush current combined with low ohmic values. Resistance values as low as 0.005Ω 4. Power film for high ohmic value and high wattage 5. High Voltage thick film for high voltage applications • Flexible J-bend terminations • Working Temperature Range: -55°C to +150°C S ER I E S S P E C I F I C AT I O N S Military grade versions available; contact Ohmite. *Last two digits designate package size Wirewound Surface mount 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • [email protected]

Wirewound Surface mount C h a r a c t e r is t ics Power Maximum (watts)* voltage Part Number Resistance range Temp. Coefficient 5% tol. 10% tol. 0.1Ω–1Ω 1Ω–10Ω 10Ω+ Dielectric Withstanding Tape Size 13” reels Package limit hot spot temperature rise Momentary Overload 6.3x rated power for 5 sec. 2x rated power for 0.1 sec. 5x rated power for 5 sec. 2x rated power for 0.1 sec. 5x rated power for 5 sec. The temperature rise graph data was obtained by a selection of test substrate size and trace width for each resistor size to limit operating temperatures to safe values. Solder joint Alumina: 0.040...

Wirewound Surface mount Recommended for glue dot application Note 1: Packages BA and CA are only available with a pedestal base. Packages CB and DA are available in either pedestal or recessed base. Packages DB and EA are only available in a recessed base. Note 2: Test point is .020 above PCB. Note 3: Tape and reel dimensions per EIA 481 A except “EA” size which is 12 mm component pitch versus 16mm pitch. Land pattern dimensions are for reference only Full Radius Tape Start Slot All reels are compatible with major pick-and-place machines and made in accordance with EIA 481 A (except EA size,...

Wirewound Surface mount Surface Mount Power o r d e r in g info r m a t ion Component type R = resistor Type of Base S = standard R = recessed Package Modifier A, B sequential Component Modifier Wattage C = carbon/ceramic Examples: composition 1S3 = 1.25W F = film 2S0 or 2R0 = 2.0W P = power film 3R5 = 3.5W W = wire N = wirewound, non-inductive T = Tape and Reel (optional) (For example, the part number shown is a wirewound resistor, 3.5 watt, recessed base, 32mm tape size, first case size [A], 1000 ohms 1% tolerance.) E = RoHS compliant Resistance Value Available Jan. 2006 R = Decimal Examples:...