Catalogs >
Ohmite >
CP Series

CP Series
2Pages

Catalog excerpts

The Ohmite CP4 series Liquid Coldplates are designed for Ohmite heatsinkable type resistors, such as TAP600, TAP800, TA1K0, TA2K0, and various SOT-227 resistor packages. The CP series also provides maximum heat removal for SCRs, rectifiers, diodes, thyristors, and other high-power semiconductor devices. The CP series is customizable to fit multiple applications. Length and mounting hole patterns can be specified. SERiES SPECiFiC ATiONS Mounting Surface Weight Ohmite Resistor Thermal Part Number Area (in2/mm2) (oz/g) Series Resistance12 (°C/W) Tubing Copper, 0.375” OD, nominal wall thickness of 0.050” Plate Aluminum 6063-T5 Weight 805 g 2 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com • Designed for Ohmite products, Pre drilled hole patterns for standard Ohmite planar resistors TAP600/ TAP800 and TAP1K0/TAP2K0. • Design flexibility, Chill Plate lengths can be configured as well as mounting hole patterns to accept a multitude of devices. Thermally efficient copper mounting surface for the most efficient heat transfer.

Open the catalog to page 1

CP Series Cold Plate Four-pass Heatsink Graph data produced using Ohmite TAP2K0. 6 Overall Thermal Resistance, Mtg. Surface to Inlet Water (°C/w) 1 1.5 Water Flow Rate (gpm) Custom sizes and bolt configurations are subject to minimums. Four Pass Length Hole Pattern Width RoHS (mm) A = no holes (mm) Compliant B = TAP600/800 C = TA1K0/TA2K0 (assigned sequentially for custom patterns) #8-32 UNC tapped thru-hole (4 places) 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.co

Open the catalog to page 2