TCS-B Operation Instructions
32Pages

OHM （Chongqing） Electronics Technology CO.,LTD. Tel: 023-68151154 Fax: 023-68151154-803 Service:4009209120 Quality Assurance OHM (Chongqing) Electronics Technology CO., LTD. (hereinafter referred to as OHM) warrants that the product completely conforms to various technical parameters listed in the instructions at delivery and that it can be able to normally function as along as it is correctly installed and operated as required. Warranty Commitment This product has one year of warranty period since the date of delivery. The company promises to make repair when any damage or fault that is not caused by human factors occurs during the warranty period. The product needing repair must be sent to maintenance station designated by the company. The foregoing warranty scope does not include consumable parts like relays, fuses, batteries and so on, or system damages caused by installation error, as well as does not contain faults that are caused by improper use or unauthorized changes by the customer. Remark This manual describes basic principle, operation and application, installation and system maintenance of TCS-B series. Before installation and using, carefully read this manual and properly keep it for future reference. This manual may be updated at any time as needed. If needed, contact the dealer or manufacturer to obtain the latest version

OHM （Chongqing） Electronics Technology CO.,LTD. Tel: 023-68151154 Fax: 023-68151154-803 Service:4009209120

OHM （Chongqing） Electronics Technology CO.,LTD. Tel: 023-68151154 Fax: 023-68151154-803 Service:4009209120 Read through these operating instructions carefully before working with the radio control system. As an integral part of the radio control system, the operating instructions shall be always kept by specially-assigned personnel. The term “machine” used in the operating instructions refers to various equipment controlled by the radio control system in general; The radio control system is used to control machines and for data transfer. Observe the job safety and accident prevention...

OHM （Chongqing） Electronics Technology CO.,LTD. Tel: 023-68151154 Fax: 023-68151154-803 Service:4009209120 cranes is prohibited in every instance.  Select a safe operation location for the radio control system, from which you have a good and complete view of the working movements of the machine, the load movements and the surrounding working conditions. It is not permissible to put a radio transmitter unattended to one side. Always switch the radio transmitter off when it is not required. This applies in particular if you change location, when working without radio control, during breaks...

OHM （Chongqing） Electronics Technology CO.,LTD. Tel: 023-68151154 Fax: 023-68151154-803 Service:4009209120 Always check housing and push-buttons of the transmitter. In case of damage found, immediately replace it. Always pay attention to and check voltage of the transmitter; in case of no power or insufficient voltage, immediately replace the battery. In case of any abnormal condition, immediately press the emergency stop switch. In case of temporary disuse or end of operation, press the emergency stop switch. Do not use 2 (or more) transmitters to operate the same equipment in the same...

OHM （Chongqing） Electronics Technology CO.,LTD. Tel: 023-68151154 Fax: 023-68151154-803 Service:4009209120 2、Introduction TCS-B series are Push-buttons radio controls, including TCS-B08; TCS-B12; TCS-B16; TCS-B20; TCS-B16FK; TCS-B08FIX. Among which, TCS-B08FIX system is a kind of fixed radio control adopting TCS-B series platform design. 2.1 Function introduction 2.1.1 Basic function TCT-B08: 8 one-step push buttons +E-stop. TCR-B08: up to 8 relays output. Standard system functions are shown in the figure above. TCT-B12: 8 two-step push buttons +E-stop. TCR-B12: up to 12 relays output....

OHM （Chongqing） Electronics Technology CO.,LTD. Tel: 023-68151154 Fax: 023-68151154-803 Service:4009209120 TCT-B16: 10 two-step push buttons +E-stop. TCR-B16: up to 16 relays output. Standard system functions are shown in the figure above. TCT-B20: 12 two-step push buttons +E-stop. TCR-B20: up to 20 relays output. Standard system functions are shown in the figure above. Operating Instructions for TCS-B

OHM （Chongqing） Electronics Technology CO.,LTD. Tel: 023-68151154 Fax: 023-68151154-803 Service:4009209120 TCS-B16FK TCT-B16FK:10 two-step push buttons + E-Stop + display screen. TCR-B16FK: up to 16 relays output, up to 4 I/O input, up to 2 analog input. Standard system functions are shown in the figure above. Operating Instructions for TCS-B

OHM （Chongqing） Electronics Technology CO.,LTD. Tel: 023-68151154 Fax: 023-68151154-803 Service:4009209120 TCS-B08FIX TCT-B08FIX: up to 8 I/O input, up to 2 analog input. TCR-B08FIX: up to 8 relays output, up to 2 analog output . TCS-B08FIX is a fixed system. The housing of the transmitter and receiver are all medium-sized receiver housing, as shown in the figure above. Operating Instructions for TCS-B

OHM （Chongqing） Electronics Technology CO.,LTD. Tel: 023-68151154 Fax: 023-68151154-803 Service:4009209120 TCS-B16FIX TCT-B16FIX: up to 16 I/O input, up to 2 analog input. TCR-B16FIX: up to 16 relays output, up to 2 analog output . TCS-B16FIX is a fixed system. Housing of the transmitter and receiver are all medium-sized receiver housing, as shown in the figure above. Dual-speed push buttons: 2-speed can only be effective after 1-speed is pressed. Emergency stop switch: When an emergency occurs, press this switch to immediately stop the controlled equipment. Operating Instructions for TCS-B

OHM （Chongqing） Electronics Technology CO.,LTD. Tel: 023-68151154 Fax: 023-68151154-803 Service:4009209120 2.1.2 Special function Standby transmitter  It has the same functions as the original transmitter and does not have the Smart Card. When the original transmitter fails, remove its Smart Card and insert it into the standby transmitter; then the standby transmitter can replace the original one and immediately work. One-to-many function (as shown in the figure)  One transmitter can control several receivers. Through selection function on the transmitter, select one receiver for control...