Portable Hone Sets

Product catalog summary

Introduction
Ohio Tool Works (OTW) has introduced a new line of replacement abrasives, enhancing its reputation for quality and customer service. These portable honing tools are essential for many honing operations, and OTW offers a wide range of standard and special replacement stones, most of which are available for immediate shipment.

Product Specifications

Series and Diameter Range: The products are categorized into series based on diameter ranges: 2.5" - 2.7", 2.7" - 4.1", 3.5" - 5.5", and 4.1" - 60".
Abrasive Types: Available in Silicon Carbide, Aluminum Oxide, Resin, CBN (Borazon), and Diamond.
Abrasive Grit Sizes: Standard grit sizes include 80, 150, 280, 400 for Silicon Carbide, Aluminum Oxide, and Resin; and 100/120, 200/230, 325/400, 600 for CBN and Diamond.
Abrasive Hardness: Options include Soft, Standard, Hard, and Hardest.

Recommended Abrasive Selection by Material Type
The document provides recommendations for abrasive selection based on material type, including Aluminum, Cast Iron, and Steel (both below and above 50 HRC). Each material type has specific abrasive specifications and approximate finish measurements in micro-inches and micrometers.

Contact Information
For more information, Ohio Tool Works can be contacted at their Ashland, OH location via phone or fax.

Catalog excerpts

Replacements Stones Portable Hone Sets OTW Ohio Tool Works PRODUCT SHEET Vitrified Stone Code: W47A45 Abrasive Hardness Abrasive Grit Size* Sunnen 2468 * Standard grit sizes above. Others are available A New Source for a Familiar Product Ohio Tools Works has expanded on its reputation for quality and customer service with a new line of replacement abrasives. Portable honing tools are an integral part of many honing operations. OTW is proud to offer an extensive line of standard and special replacement stones, most of which ship directly from stock. Abrasive Type Silicon Carbide Aluminum Oxide Resin For more information call: 419.281.3700 Ohio Tool Works, LLC 1374 Enterprise Pkwy | Ashland, OH 44805 Phone: 419.281.3700 | Fax: 419.281.3707

Open the catalog to page 1

Abrasive Hardness i OTW Stone Code: OH-W47Q - B 76 M Soft Standard Hardest Abrasive Grit Size* * Standard grit sizes above. Others are available Abrasive Type Series (Diameter Range) Abrasive Approx. Specification Finish (Ra) Ohio Tool Works, LLC 1374 Enterprise Pkwy | Ashland, OH 44805 Phone: 419.281.3700 | Fax: 419.281.3707

Open the catalog to page 2

Portable Hone Sets

Portable Hone Sets

Catalog excerpts

All Ohio Tool Works catalogs and technical brochures