Ogan GN Series Handguns Installation and Operating Manual

Contents General Specifications of the Handgun Safety Symbols

General Specifications of the Ogan GN Series Handguns OGAN GN Series Handguns are developed for increasing flexibility of adhesive applications and ease the usage. They provide constant operational temperature up to 210°C, which guarantees continuous adhesive flow. These hand held compact guns are designed to endure the roughest working conditions, their durable external and internal components provide long service life. 100% compliant with piston and gear pump melter systems of leading manufacturers. Lightweight and ergonomic. Specially formulated plastic structure is extra heat resistant and...

GN 410 Series Handgun• GN410 handguns are equipped with ball type swivel joint which can move in all directions, reduces the load of the hose and provides ease of application to the operator.• GN 410 Series Handgun is 100% compliant with Nordson Systems. GN 410 Bottom Feed

GN 310 Series Handgun • GN310 handguns are equipped with rotary fittings which enables handgun to rotate 360° without twisting the hose, and allows wide range of movement and high flexibility. • GN310 handguns are 100% compatible with piston pump melter sytems of all brands such as; Nordson, Robatech, Meler, UES, Melton, Buhnen, Preo, and Idealtech. • GN310 gun hose can be produced with corrugated flexible polyamide external jacket upon request. Technical Information Model * Add "S" for Spray and "B" for Bead version to P/N

GN 600 Series Handgun • GN600 handguns are equipped with ball type swivel joint which can move in all directions, reduces the load of the hose and provides ease of application to the operator. Ball Type Swivel Joint With the cordset connection, GN 600 handguns can be easily mounted to standard automatic hoses. • GN 600 Series Handgun is 100% compliant with piston pump melter systems of leading manufacturers. Technical Information Model

GN 800 - GN 850 Series Handguns GN800 and GN850 handguns are developed for manual applying of the hot melt materials to horizontal surfaces either in bead or spray form. GN800 and GN850 handguns must be used with a balancer, which compensates the weight of the handgun, prevents it from falling, and allows the use of both hands after the application of the hot melt. With the cordset connection, GN800 and GN850 handguns can be easily mounted to standard automatic hoses. GN800 and GN850 Series Handguns are 100% compliant with piston pump and gear pump melter systems of leading manufacturers. Technical...

Nozzles and Adapters Bead Extrusion Short Nozzles Bead Extrusion Long Nozzles Swirl Nozzles Down-apply Extrusion Adapter Swirl Spray Adapter

Safety Instructions This installation and operating manual contains important instructions for the safe installation, use, handling and maintenance of OGAN GN Series Handguns. Before installing and operating the handguns, carefully read all technical and safety information provided. Make sure you understand the installation guidelines and follow all safety and operating instructions. In addition, please follow all local occupational health and safety codes before installing and operating this product. Any intervention to the product other than the manufacturer will make the system unsafe and...

Safety Symbols The following safety-related symbols warn of dangers and sources of danger. Get comprehensive information about these symbols. Caution: Failure to follow these instructions will result in injury, death, and may cause damage to system and accessories. Caution: Dangerous electrical voltage. Failure to follow these instructions will result in injury, death, and may cause damage to system and accessories. Heated hoses are electrical systems. Except for trained personnel who have sufficient knowledge about the subject, it should not be intervened. Caution: Burn hazard. Wear heat protection...

Installation Once all tests and controls of the GN Series Handguns are completed, the connection parts are closed with plastic stoppers so that no foreign material can enter the handgun, handgun will be covered with a protective nylon and shipped in a box. 1- While removing the handgun from the box, prevent it from dropping, do not pull from the connectors / cables. 2- Use double wrench when connecting the swivel fitting to the hose fittings. Make sure the connections are not loose. During this process the handgun and hose should not be connected to power. 3- Once the fittings are connected properly,...

Dismantling of Used Handgun Dismantling the used handgun where there is glue in it for maintenance or storage should be made carefully. 1- Heat the hotmelt system upto 2/3 of the operational temperature (eg. if operating temp is 150°C heat the system upto 100°C), then disconnect the electrical connections. 2- Fittings should be removed when still hot, they should be removed by using double wrench. When necessary heat up the fittings by using a heat gun. 4- In case there is damage on the connectors and the cordset or the shell of the handgun, energy should be disconnected and the handgun should...

Warranty Information OGAN warrants that the GN Series Handguns will be merchantable quality and will comply with the agreed specification. Each product will be free from defects in performance for its intended use for a maximum period of 1 year ( one year for single shift, six months for two shift and four months for three shift operations) from the date of initial sale to final customer. Handguns will be repaired or alternative handgun will be delivered when failure, fault, defect of parts etc. discovered within above provided warranty period, and when OGAN accepts that they attribute obviously...

EU-DECLARATION OF CONFORMITY Manufacturer : OGAN Endustriyel Isı Hortum San.Ltd.Sti. 34953 Istanbul / Turkey Product Group : GN Series Hand Guns Product Type : EN 2014/35/EU Low Voltage Directive EN 60519-1/2015 General safety requirement for industrial installations EN 60519-2/2006 Safety in electroheat installations EN 60204-1/2018 Safety of machinery - Electrical equipment We hereby declare that in planning and manufacturing of this product the basic safety and health requirements of the EU directives mentioned above have been observed. Serhat Taşgedik Managing Director