Flexible Heated Transfer Hoses for the Plastic Industry Co-Extrusion Heating Hoses for Plastics Industry HT700 Co-extrusion heating hoses are produced to transfer melted plastic and thermoplastic materials from co-extruder to mold at defined tempatures. HT700 Co-extrusion heating hoses are produced from high temperature and pressure resistant T3 PTFE hoses; - Provides flexible connection between the co-extruder and mold, Simplifies mold changes and maintenance, Minimizes the thermal expansion and vibration occured from heating, Guarantees operational efficiency under proper installation, maintenance and normal operating conditions. Used extensively with machines for thermoplastic extrusionted line for Co-Extrusion ,Flexible heater hose 250 °C 230 V AC/DC 50/60 Hz DN8 140 W/m DN10 160 W/m DN12 200 W/m DN16 260 W/m DN20 330 W/m Pressure hose T3 PTFE Fittings Carbon – Stainless steel Thermal insulation Silicon foam End cap Hard cap External jacket Polyamide braid black Power cable Standard 2 x 1.5 m Temperature sensor Fe-CuNi (J) , PT100 , NiCr-Ni (K) Temperature limits +5 / -10 Protection type IP54 Approvals CE Heating hoses in extrusion technology , Heating tube for co-extrusion Operating temperature Voltage Rated power Interior diameter of the fittings 6 mm 7 mm 10 mm 12,5 mm 16 mm BDN-M Metric T3 Type pressure hose working temperature limit -70 +250 °C DN 8 10 12 16 20 Other lengths and sizes on request Bending radius 85 mm 110 mm 150 mm 175 mm 200 mm BDN type fitting Temperature – Correction Factor 20 °C 1,00