P56 Evo

Product catalog summary

Specifications:
The Piegaferro Bending Machine has dimensions of 130 x 95 x h. 89 cm and 130 x 95 x h. 104 cm, with weights of 710 kg and 725 kg respectively. It operates with a power of 7.5 Hp / 5.5 kW and requires a voltage of 400V / 50Hz. The machine can handle materials with a resistance of R=65 kg/mm² and R=85 kg/mm², with varying diameters for single, double, and triple bending.

Standard Equipment:
The machine comes with a hardened square pin, a hardened stirrup bending pin, four hardened bush holding pins, a checking block, a pedal, seven bushes of varying diameters (Ø60-70-80-95-120-150-175mm), and a set of Allen keys.

Optional Equipment:
Optional features include a unique 2 in 1 system for bending multiple stirrups simultaneously, spiral equipment for fabricating spiral armatures with bars up to Ø16mm, an arm for large radii allowing the use of larger bushes, a Type B working top for easier maintenance, a roller bench for material handling, an Angle Control panel for programming up to 20 bending angles, a Basic Angle Control panel for manually setting up to 6 bending angles, and a 2-speed motor for optimizing production times.

Additional Features:
The machine includes long saddles for double bending, a turning plate with a diameter of Ø550 mm, and the ability to use bushes up to Ø320 mm. The Angle Control panel allows for rapid and intuitive programming of bending angles, while the Basic Angle Control panel permits manual setup of bending sequences. The 2-speed motor is available upon request for working with bars of different diameters.

Contact Information:
OF.ME.R.® s.r.l. is located at Via A. Grandi, 19, 20056 Trezzo sull’Adda (MI), Italy. They can be contacted via phone at +39 02 9090134, fax at +39 02 90961378, or email at [email protected]. More information is available on their website at www.ofmer.com.

Catalog excerpts

—Specifications -Spezifikationen ■Caracteristiques —Especificagoes 130 x 95 x h. 104 cm 725 kg 1.28 m3 'Q 5/min. Casquillos utilizables hasta 0320 mm Installierbare Buchsen bis 0320 mm ^^^^^^^Optional Optional Equipment Equipement optionnel Wahlfreie Ausrustungen 1 pino quadrado temperado; 1 pino dobra estribos temperado; 4 pinos porta casquilho temperados; 1 batente; 1 pedaleira; 7 casquiLLos 06O-7O-8O-95-12O-15O-175mm; 7 Buchsen 06O-7O-8O-95-12O-15O-175mm; 7 casquilhos 06O-7O-8O-95-12O-15O-175mm; 1 conjunto de chaves Allen. Dotazione Standard EquipamiGnto dG serie 1 pcrno quadro tGmprato; 1 pcrno piGga staffe tGmprato; 4 perni porta bussola temprati; 1 riscontro; 1 pedaliera; 7 bussoLe 06O-7O-8O-95-12O-15O-175mm; 1 set chiavi a brugola. 1 pirn cuadrado endurecido; 1 pino dobla estribos endurecido; 4 pinos llega casquillos endurecidos; 1 bloque; 1 pedal; 1 juego llaves Allen. 4 Carrelli lunghi Indispensabili per realizzare la doppia piegatura. Piatto rotante 0550 mm Bussole utilizzabili fino a 0320 mm 4 Carros largos Indispensables para lograr el pliegue doble. Plato rotatorio 0550 mm Standard EquipmGnt Serienausrustungen 1 hardened square pin; 1 hardened stirrup bending pin; 4 hardened bush holding pins; 1 checking block; 1 pedal; 7 bushes 06O-7O-8O-95-12O-15O-175mm; 1 set Allen keys. 1 geharteter Vierkantbolzen; 1 geharteter Bugelbiegebolzen; 4 gehartete Buchsehaltbolzen; 1 Seitenstuck; 1 Pedalsteuerung; 1 Set Innensechskantschlussel. 4 Long saddles Indispensable to realize the double bending. Turning plate 0550 mm Can be used bushes up to 0320 mm 4 Lange Gestelle unerlasslich, um die Doppelbiegung zu erreichen. Umlaufender Teller 0550 mm Equipement de serie Equipamento de serie 1 pivot carre trempe; 1 pivot cintre-etriers trempe; 4 pivots porte-douilles trempes; 1 butee; 1 pedale; 7 douiLLes 06O-7O-8O-95-12O-15O-175mm; 1 jeu de cles Allen. 4 Chariots longs Indispensables pour realiser le double pliage. Plateau tournant 0550 mm Douilles utilisables jusqu'a 0320 mm 4 Carros longos Indispensaveis para obter a dobra dupla. Placa rotativa 0550 mm Casquilhos utilizados ate 0320 mm Equipamientos opcionales Equipamentos opcionais To bend more stirrups simultaneously and determine the length from the bending point. Unique 2 in 1 Um mehr Bugel gleichzeitig zu falten und die Lange von der Biegestelle zu bestimmen. Spiral equipment Permits to fabricate spiral armatures with bars 0 max. 16mm. Spiralvorrichtung Es ermoglicht, Spiralbewehrungs-stabe mit Rundeisen 0 max. 16mm herzustellen. OF.ME.R.® s.r.L Per piegare piu staffe contemporaneamente e determinarne la lunghezza dal punto di piegatura. Unique 2 en 1 Para doblar mas estribos simultaneamente y determinar la longitud desde el punto de flexion. Spiralatrice Permette di fabbricare armature a spirale con barre 0 max. 16mm. Pour plier plus etriers simultanement et determiner la longueur du point de flexion. Unique 2 em 1 Para dobrar mais estribos simultaneamente e determinar o comprimento do ponto de curvatura. Outil pour spirales Permet de fabriquer armatures en spirale avec barres 0 max. 16mm. Ferramenta para espirais Permite que a fabricar armaduras em espiral com barras 0 max. 16 mm. Via A. Grandi, 19 20056 Trezzo sull'Adda (MI) ITALYE-mail: [email protected] Website: www.ofmer.com

Open the catalog to page 1

Braccio grandi raggi Consente di utilizzare bussole con diametri maggiori rispetto al piatto rotante della macchina, ottenendo raggi fino a otto volte più ampi del diametro del tondo da piegare. Arm for large radii Bras pour grands rayons It allows to use bushes with superior Permet l'utilisation de barres avec diameters compared to the machine diamètres plus grands que le plateau turning plate, obtaining radius up to tournant de la machine, en obtenant eight times larger compared to the rayons jusqu'à huit fois plus grands diameter of the steel to work on. du diamètre de la barre à cintrer....

Open the catalog to page 2

P56 Evo

P56 Evo

Catalog excerpts

All OFMER catalogs and technical brochures