Swaging tools
8Pages

Technical Data Sheet Swaging Tools Installation of Multi Crimp Rings Connecting Technology

Installation of Multi Crimp Rings Efficient, cordless installation of small Multi Crimp Rings Lightweight, ergonomic design for easy handling MCR also applicable for small batch series LED-display to indicate battery capacity and service interval Cordless Crimp Pincer Oetiker CC 01 The cordless crimping pincer was developed especially for the field of Industry & Commerce, with the result that Oetiker multi crimp rings can be deployed economically in small series as well. With this device, multi crimp rings in the 5–25 mm diameter range can be shrunk simply and quickly. With the automatic...

Installation of Multi Crimp Rings www.oetiker.com Technical Data Optional accessories and spare parts:_ External dimensions: approx. 480 x 56 x 80 mm_ Battery for CC 01 (Item no: 14000972) Weight: approx. 2500 g Additional pincer heads for specific sizes_ Sets without pincer heads according to language/country Delivery scope Oetiker CC 01:_ (mains plug)_ Cordless Crimp Tool CC 01 (with pincer head)_ CC 01 (EU)_13900729 Operating Instructions (multi-lingual document)_ CC 01 (US)_13900731 Charger (compatible to local electrical supply voltage/ CC 01 (UK)_13900732 plug configuration)_...

Installation of Multi Crimp Rings Two separable halves for optimum component access Small size allows flexibility Intermeshing swaging segments guarantee 360° compression of MCR Interchangeable swaging jaws enhance quick-change features Optional arrangement enables 2 rings to be installed only 45 mm apart Two-Piece Swaging Tool Oetiker Compact For Multi Crimp Rings Rights to make technical changes in the interests of further development reserved. Oetiker Multi Crimp Rings should be installed using the swaging tools developed for them. This ensures correct installation and the best possible...

Installation of Multi Crimp Rings Single hinge for optimum accessibility Automatic locking when tool is activated Minimal width for parallel operation, enabling multiple single-axis installations Intermeshing swaging segments guarantee 360° compression of MCR Interchangeable swaging jaws enhance quick-change features Hydraulic Swaging Tool Oetiker Flex For Multi Crimp Rings Technical data External dimensions Complete system including mobile bench: 1550 x 1450 x 700 mm (l x h x w) Swaging press: 1270 x 660 x 80 mm (l x h x w) Weight Including mobile bench and hydraulic unit: ca. 220 kg MCR...

Installation of Multi Crimp Rings Process reliable installation with electronic monitoring of all specified parameters Tool hinged for optimum accessibility Fully automatic locking when tool is operated Can be installed parallel for simultaneous closure of several MCRs Intermeshing swaging segments guarantee 360° compression of MCR Interchangeable swaging jaws enhance quick-change features Electronically Controlled Hydraulic Swaging Tool Oetiker ELS 01 For Multi Crimp Rings Technical Data External dimensions Complete system including mobile bench: 1550 x 1800 x 700 mm (l x h x w) Swaging...

Installation of Multi Crimp Rings The thrust force of the hydraulic cylinder is set by changing the parameters at the ELS 01 control unit. This is accomplished by means of a PC, programming the specifications of a sequence of consecutive installations, or, optionally, using an external control signal. Specially adapted Test and Calibrating Equipment, based on the Calibrator CAL 01, is employed to calibrate the thrust force. Example of an arrangement of swaging tools. Rings can be closed simultaneously. Tool type With 3 x 400V/50-60Hz mains voltage 13401011 For other voltages on request CPM...

The Oetiker Group: www.oetiker.com Headquarters Switzerland Hans Oetiker AG Maschinen- und Apparatefabrik Oberdorfstrasse 21 CH-8810 Horgen (Zürich) T +41 44 728 55 55 F +41 44 728 55 15 info@ch.oetiker.com Germany Hans Oetiker Metallwaren- & Apparatefabrik GmbH Üsenbergerstrasse 13 D-79346 Endingen a. K. T +49 76 42 6 84-0 F +49 76 42 6 84-125 info@de.oetiker.com Austria Hans Oetiker Maschinen- und Apparatebau Ges.m.b.H. Eduard-Klinger-Strasse 19 A-3423 St. Andrä-Wördern T +43 2242 33 994-0 F +43 2242 33 997 info@at.oetiker.com Canada Oetiker Limited 203 Dufferin Street South P. O. Box...