*mydirectindustry

Catalogs
OETIKER
Stepless Low Profile Clamps 192

Stepless Low Profile Clamps 192

Product catalog summary

Overview: Oetiker Stepless® Low Profile Clamps 192 are designed with 1-wave and 3-wave tolerance compensation elements to ensure effective clamping performance. These clamps are made from stainless steel (Material no. 1.4301/UNS S30400) and offer high corrosion resistance (≥ 1000 hours according to DIN EN ISO 9227).

Specifications: The clamps are available in nominal diameters ranging from 19.5 mm to 120.5 mm, with a band width of 10 mm and thickness of 0.8 mm. They are available in 0.5 mm diameter graduations upon request.

Design Features: The clamps feature a novel tensioning hook design for fast installation and high radial force, burr-free strip edges to reduce damage risk, and a low installed height for minimal space requirements. The 360° Stepless® design ensures uniform compression.

Tolerance Compensation: The clamps can accommodate diameter changes due to temperature and vibration, with the convolutes allowing for elongation to maintain interlock engagement.

Assembly Recommendations: Clamps can be installed using manual or pneumatic pincers. The closing process involves engaging the pincer jaws within both tensioning hooks to reduce the clamp diameter.

Ordering Information: Clamps are identified by their nominal closed diameter. Specific diameters require a minimum order quantity. The document provides a detailed list of item numbers, diameters upon delivery, and closed diameters for both 1-wave and 3-wave tolerance compensation elements.

Contact Information: The document includes contact details for Oetiker's headquarters in Switzerland and various international offices.

Catalog excerpts

Technical Data Sheet Stepless® Low Profile Clamps 192 Connecting Technology

Open the catalog to page 1

Stepless® Low Profile Clamps 192 PG 192 PG 192 with tolerance compensation element, 1-wave PG 192 with tolerance compensation element, 3-waves Tolerance compensation element Tensioning hook Load retaining hook Tolerance compensation elements: allow for variations in component tolerances and temperature variations 360° Stepless®: uniform 360° compression or uniform surface pressure Low installed height: minimum space requirement, low imbalance on rotating parts Novel tensioning hook design: fast and simple installation, high radial force Burr-free strip edges: reduced risk of damage to parts...

Open the catalog to page 2

Stepless® Low Profile Clamps 192 PG 192 The diameter reduction of the clamp is substantially proportional to the closing travel, but subject to slight variations, depending on the degree to which tolerance compensation is required and the required radial force. The theoretical maximum reduction in diameter is given by the formula: closing travel Max. diameter reduction = π Closing travel Closing travel* * Optionally available with enlarged as-supplied diameter (greater closing travel) Tolerance compensation The tolerance compensation waves are activated when the compressed diameter of the application...

Open the catalog to page 3

Stepless® Low Profile Clamps 192 PG 192 Order information Item No. Ø upon Ø nominal, delivery (mm) closed (mm) * Ø upon Ø nominal, delivery (mm) closed (mm) * Ø upon Ø nominal, delivery (mm) closed (mm) * Tolerance compensation element 1-wave Band width 10 mm, thickness 0.8 mm Tolerance compensation element 1-wave Band width 10 mm, thickness 0.8 mm Tolerance compensation element 3-waves Band width 10 mm, thickness 0.8 mm Optionally available with enlarged as supplied diameter (greater closing travel). The data in this catalog are based on many years experience. They are intended for reference,...

Open the catalog to page 4

Stepless® Low Profile Clamps 192 PG 192 Order information Item No. Ø upon Ø nominal, delivery (mm) closed (mm) * Ø upon Ø nominal, delivery (mm) closed (mm) * Ø upon Ø nominal, delivery (mm) closed (mm) * Tolerance compensation element 3-waves Band width 10 mm, thickness 0.8 mm Tolerance compensation element 3-waves Band width 10 mm, thickness 0.8 mm Tolerance compensation element 3-waves Band width 10 mm, thickness 0.8 mm * Without affecting the tolerance-compensation element (free state).

Open the catalog to page 5

The Oetiker Group: www.oetiker.com Headquarters Switzerland Hans Oetiker AG Maschinen- und Apparatefabrik Oberdorfstrasse 21 CH-8810 Horgen (Zürich) T +41 44 728 55 55 F +41 44 728 55 15 [email protected] Germany Hans Oetiker Metallwaren- & Apparatefabrik GmbH Üsenbergerstrasse 13 D-79346 Endingen a. K. T +49 76 42 6 84-0 F +49 76 42 6 84-125 [email protected] Austria Hans Oetiker Maschinen- und Apparatebau Ges.m.b.H. Eduard-Klinger-Strasse 19 A-3423 St. Andrä-Wördern T +43 2242 33 994-0 F +43 2242 33 997 [email protected] Canada Oetiker Limited 203 Dufferin Street South P. O. Box 5500...

Open the catalog to page 6

All OETIKER catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list