Technical Data Sheet Connecting Technology

Tongue-in-groove design Interlock Narrow band: concentrates transmission of clamping force, less weight Stepless over 360°: uniform compression or uniform surface pressure Clamp ear: compensates for component tolerances, adjustable surface pressure Dimple: increases clamping force, spring-effect compensates for changes in diameter due to thermal expansion Burr-free strip edges: reduced risk of damage to parts being clamped Stepless® Ear Clamps Product Group 117 & 167 Material PG 117 Galvanized or zinc-plated steel band PG 167 Stainless Steel, Material no. 1.4301/UNS S30400 Optional alternative...

Note: the above sketch shows the appearance of a closed “ear” (s’); it does not necessarily indicate an effective closed assembly. The following applies as a guideline: To determine the correct clamp diameter, push the hose onto the attaching material, (e.g. the nipple), and then measure the outer diameter of the hose. The value of the outer diameter must be slightly above the average value of the diameter range of the clamp to be selected. A clamp can only be considered adequately closed when the ear width (s) has been reduced by at least 40%, and the correct closing force was used for assembly....

Installation data Material Size Closing Installation tools force-monitored1: dimensions (mm) force max. Manual Pneumatic Cordless (mm) (N) PG 117   7 x 0.6 11.9 –   17.8 1100 HMK 01/S01 HO ME 2000 – 4000 CP 01   7 x 0.8 18.0 –   24.9 1400 HMK 01/S01 HO ME 2000 – 4000 CP 01 PG 167   5 x 0.5   6.5 –   11.8 1000 HMK 01/S01 HO ME 2000 – 4000 CP 01   5 x 0.6 18.5 – 100.0 1700 HMK 01/S01 HO ME 2000 – 4000 CP 01   7 x 0.6 11.9 –   17.5 2100 HMK 01/S01 HO ME 2000 – 4000 CP 01 17.8 – 120.5 2400 HMK 01 HO ME 3000 – 4000 CP 01   7 x 0.8 17.7 – 120.5 2800 - HO ME 3000 – 4000 CP 01   9 x 0.6 21.0 – 120.5...

Order information PG 167 Item No. Ref. No.

Order information PG 167 Item No. Ref. No. Band width 10 mm, thickness 0.8 mm (1008R) In the diameter range 24.5 mm to 120.5 mm, these clamps are available in 0.5 mm steps on request. Band width 10 mm, thickness 1.0 mm (1010R) In the diameter range 62 mm to 120.5 mm, these clamps are available in 0.5 mm steps on request. Other diameters available on request. The data in this catalog are based on many years experience. They are intended for reference, not as design specifications.

PEX connecting solutions for markets compliant with Standard ASTM1 F877/F2098 PG 167 PEX (conform to ASTM F 877/2098) The specified clamps are suitable for fast and secure connections of PEX 2 pipes in the plumbing field. The clamp design ensures tamper detection. The clamp sizes are solely intended for PEX applications with corresponding inch sizes. The robust interlock design, specifically developed for PEX applications leads to even higher radial loads of the clamp. NSF3 Product listing: Complies with NSF product listing cNSFus-PW Warning: – In high chloride water conditions, use only plastic...

The Oetiker Group: www.oetiker.com Headquarters Switzerland Hans Oetiker AG Maschinen- und Apparatefabrik Oberdorfstrasse 21 CH-8810 Horgen (Zürich) T +41 44 728 55 55 F +41 44 728 55 15 [email protected] Germany Hans Oetiker Metallwaren- & Apparatefabrik GmbH Üsenbergerstrasse 13 D-79346 Endingen a. K. T +49 76 42 6 84-0 F +49 76 42 6 84-125 [email protected] Austria Hans Oetiker Maschinen- und Apparatebau Ges.m.b.H. Eduard-Klinger-Strasse 19 A-3423 St. Andrä-Wördern T +43 2242 33 994-0 F +43 2242 33 997 [email protected] Canada Oetiker Limited 203 Dufferin Street South P. O. Box 5500...