Catalogs >
OETIKER >
PEXGrip

PEXGrip
2Pages

Catalog excerpts

Connecting Solutions for PEX Plumbing Applications Efficient. Reliable. Secure. For nearly 70 years, Oetiker high-tech hose and tubing connections have been used throughout the industry. Oetiker clamps are currently being used on Polyethylene cross-linked tubing applications by the PEX Plumbing Industry. The specified clamps are suitable for fast and secure connections of PEX tubing in the plumbing field. The clamp design ensures tamper detection. The clamp sizes are solely intended for PEX applications with corresponding inch sizes. The robust interlock design, specifically developed for PEX applications leads to even higher radial loads of the clamp. Connections for PEX plumbing systems Oetiker Stepless® Ear Clamps 167 for PEX offer these unique special advantages: New PEXGrip Technology* + 360° Stepless design + *Preset to prevent clamp from sliding + Certified by NSF to meet NSF / ANSI 14 requirements + *Grips tube for easy installation + Narrow band for concentrated seal compression + *Shortens tool stroke + Certified by NSF to meet NSF / ANSI 14 requirements + Requires only one installation tool for all clamp sizes + Narrow band for concentrated seal compression + Fast, simple and secure installation + Tamper-detectable design + Requires only one installation tool for all clamp sizes Preset PEX Tubing Holds in place while crimping + Fast, simple and secure installation + Tamper-detectable design *Patent Pending Order Information Stepless® Ear Clamps 167 for PEX Conform to ASTM F2098 Stainless Steel Clamps for use with F877 PEX Systems and F1807 or F2159 insert fittings. Clamp Size 13.3 mm 17.5 mm 20.8 mm 23.3 mm 29.6 mm Band width x thickness 7.0 x 0.6 mm 7.0 x 0.8 mm 7.0 x 0.8 mm 9.0 x 0.8 mm 10.0 x 1.0 mm Standard PEX clamp item no. 16703334 16703335 16705571 16703336 16704150 *PEXGrip clamp item no. 16707872 16707955 -

Open the catalog to page 1

Installation of Oetiker Sealing Solutions for PEX Systems 1. Slip clamp over tubing. 2. Close clamp ear with tool, tool will not release until clamp is fully closed. The recommended distance (dimension) between the “Clamp” and “End of the Tube” is 1/8" – 1/4". 3. Visually inspect clamp for correct closed ear form. *IMPORTANT* For proper installation of standard PEX and PEXGrip clamps, ear closure is required. * For proper installation of clamps, please use an Oetiker recommended installation tool. Installation Tools 2-Handle Ratchet Pincers Item no. 14100069 + Tool can be calibrated +...

Open the catalog to page 2

PEXGrip 2Pages

Catalog excerpts

All OETIKER catalogs and technical brochures

PEXGrip
2Pages