^ SH 500 F-SH 550 F single head frontal sawing machine CUTTING DIAGRAM SH 500 F SH 550 F Technical details - Three-phase motor 2,2 Kw - 400V - 50Hz - 2800 rpm - Blade diameter: 500 mm (SH 500 F) - 550 mm (SH 550 F) - Blade holder spindle diameter: 32 mm - Operating pressure: 6 - 8 bar - Pneumatic head tilting - 45° / 0° / +45° - Manual positioning set-up of intermediate degrees up to 22,5° right and 45° left with mechanical stops - Micro for blade stroke adjustment - Valve for blade feed speed adjustment - Spray lubrication with variable flow - Vices locking device with different working pressure - Overall dimensions: 1000 mm (a) x 1470 mm (b) x 1550 mm (c) - Weight: 520 Kg Standard equipment - Widia blade - Par of horizontal pneumatic vices - Filter group reducer + lubricator with air gun - Extractable chips collector - Installation, operation and maintenance manual - Service spanners Accessories on request - Pair of vertical pneumatic vices - Additional special templates - Cutting oil BSH 500 F-SH 550 FSINGLE HEAD FRONTAL SAWING MACHINE 'laemmE Export Department Via F. L. Ferrari, 23 44122 FERRARA - ITALY Tel. +39.0532.777418 Fax +39.0532.777477 [email protected] Sales office Italy Via Cavallotti, 16 42122 REGGIO EMILIA - ITALY Tel. 0522.271275 Fax 0522.923879 [email protected] Head office and Production Via F. L. Ferrari, 23 44122 FERRARA - ITALY Tel. 0532.777411 Fax 0532.777444 [email protected]

SINGLE HEAD FRONTAL SAWING MACHINE Single head sawing machine with frontal blade feed Pneumatic head tilting – 45° / 0° / +45° Pneumatic head tilting adjustment at intermediate degrees and over 45° with mechanical stops SH 500 F: blade Ø 500 mm SH 550 F: blade Ø 550 mm Art. 4020252 Kit of vertical pneumatic vices The blade stroke regulating device allows to stop the cut in the required position reducing operating time Goniometer positioned in the front of the machine allows the operator to easily adjust the mechanical stops Valve for blade feed speed adjustment allows to suit different cutting...