- Catalogs
- Oemme S.p.A.
- AS 251 M - AS 250 M
AS 251 M - AS 250 M
1 / 2 PagesView full catalog
AS 251 M - AS 250 M
Product catalog summary
Overview
This document provides technical specifications and operational details for the AS 251 M and AS 250 M grip testers, designed for testing the shear strength of thermal break profiles according to norm EN14024.
This document provides technical specifications and operational details for the AS 251 M and AS 250 M grip testers, designed for testing the shear strength of thermal break profiles according to norm EN14024.
Technical Specifications
- AS 251 M: Powered grip tester with a one-phase motor (230 V – 50 Hz), maximum load of 15000 N, and a pusher feed speed of 5 mm/min. The machine dimensions are 1050 mm x 280 mm x 720 mm, and it weighs 135 kg.
- AS 250 M: Manual grip tester with continuous thrust adjustment from 0 to 1000 Kg and a maximum operating pressure of 10 bar. The machine dimensions are 340 mm x 220 mm x 450 mm, and it weighs 35 kg.
Features
- Both machines include idle rollers on bearings for maintaining profile alignment and quick unlocking devices for tested profiles.
- The AS 251 M includes a serial port for PC connection and optional software for data processing.
- The AS 250 M features a quick locking and unlocking mechanism for profile samples without additional brackets.
Accessories and Equipment
- Both machines come with installation, operation, and maintenance manuals, as well as service spanners.
- Optional software is available for the AS 251 M for enhanced data processing capabilities.
See more
Catalog excerpts
AS 251 M - AS 250 M GRIP TESTER FOR THERMAL BREAK PROFILES
Open the catalog to page 1
POWERED GRIP TESTER FOR THERMAL BREAK PROFILES Idle rollers device on bearings to keep straight the profile vertical wise according to norm EN14024. Thanks to independent height adjustment, rollers allow to keep straight any kind of profiles without mechanically clamping Technical data One phase motor 230 V – 50 Hz Maximum load: 15000 N Pusher feed speed: 5 mm/min. (constant) Pusher stroke: approx. 6 mm (with automatic feedback in start position) Test sample length: 100 mm (+/-1) Height of the thrust point as to the support plane: min. 6 – max 160 mm Profile max height : 250 mm Idle rollers on...
Open the catalog to page 2All Oemme S.p.A. catalogs and technical brochures
Related Searches
- Cutting system
- Test machine
- Automatic cut-off machine
- Metal sawing line
- Automatic sawing line
- Circular sawing machine
- Material test machine
- Automated testing machine
- Transport trolley
- Wrapping machine
- Workbench
- Horizontal saw
- Automatic stretch wrapping machine
- Industrial testing machine
- Vertical testing machine
- Stretch film stretch wrapping machine
- Crimping applicator
- Profile saw
- Vertical saw
- Punching center
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.