ODU FLAKAFIX®
58Pages

From page Flat cable and processing tools The ODU FLAKAFIX system offers a reliable and economical solution for connecting PCB´s. This board-to-wire connector features contact stability, reliable long-term behaviour, low contact resistances and gas-proof contact points on the conductor. ––Detachable connection using IDC sockets and headers ––Non-detachable connection using IDC PCB connector ––2-row design ––10 to 64 contacts ––UL approved ––Fully automatic placement (pick-and-place) of the SMT models using vacuum adapter plate and tape-and-reel packaging ––Extensive accessories and...

ODU FLAKAFIX ODU FLAKAFIX IDC sockets Series 517

ODU Flakafix Contents IDC sockets, Series 517 From page Number codes for ODU FLAKAFIX, Series 517 Single-U IDC contact Double-action spring contact Single-U IDC contact Single-action spring contact Strain relief Spring clip Locking latch

Number codes Explanation of number codes for ODU FLAKAFIX, Series 517 Surface plating Number of contacts Packaging 517 = IDC sockets 0 = Cover plate, loose 1 = Cover plate, preloaded (upon request) 65 = Single-U IDC contact, single action spring contact 66 = Single-U IDC contact, single action spring contact with strain relief 75 = Single-U IDC contact, double action spring contact 76 = Single-U IDC contact, double action spring contact with strain relief 003 = I n mating area 0.5 μm Au on Ni in termination area min. 1.0 μm Sn on Ni (standard) 009 = Flash-gold-plated (upon request) 035 = I...

IDC sockets, Series 517 with single-U IDC contact Double-action spring contact Features ––Pluggable on all pin headers in cross-section 0.64 × 0.64 mm ––Plug compatible with all leading manufacturers ––With and without strain relief ––10 to 64 contacts ––With keying pin ––In accordance with DIN EN 60603-13 (DIN 41651) ––Available with spring clip locking –– Technical data Termination area 1 µm Sn on 1.25 µm Ni Contact area 0.5 µm Au auf 1.25 µm Ni B Mechanical specification Operating temperature: -55 °C to +125 °C Humidity level: 93 % rel. humidity in accordance with DIN EN 60603-13...

IDC sockets, Series 517 with single-U IDC contact Double-action spring contact Order information and dimensional table (All dimensions are in mm) Number of contacts Without strain relief With strain relief For _ please enter the required surface plating: 003 = 0.5 μm Au on Ni (standard) 009 = Flash-gold-plated (upon request) 035 = 0.75 μm Au on Ni (upon request) Number codes, see page 5.

IDC sockets, Series 517 with Single-U IDC contact Single-action spring contact Features ––Pluggable on all pin headers in cross-section 0.64 × 0.64 mm ––Plug compatible with all leading manufacturers ––With and without strain relief ––10 to 64 contacts ––With keying pin ––In accordance with DIN EN 60603-13 (DIN 41651) ––Available with spring clip locking ––  Technical data Electrical specification Contact load: 1 A at wire cross-section ≤ 0.08 mm2 (AWG 28) ≤ 1.5 A at wire cross-section 0.14 mm2 (AWG 26) Test voltage: 1,000 V eff. Termination area 1 µm Sn on 1.25 µm Ni Contact area 0.5 µm Au...

IDC sockets, Series 517 with Single-U IDC contact Single-action spring contact Order information and dimensional table (All dimensions are in mm) Number of contacts Without strain relief With strain relief For _ please enter the required surface plating: 003 = 0.5 μm Au on Ni (standard) 009 = Flash-gold-plated (upon request) 035 = 0.75 Au on Ni (upon request) Number codes, see page 5.

Strain relief for IDC sockets, Series 517 Locking latch for IDC sockets, Series 517 Features ––Can be added later ––As additional locking ––Only for space-saving version of the pin header ––  The locking latch for IDC sockets Series 517 and spacesaving pin headers can be assembled on the strain relief without tools or additional equipment. This locking system, which simultaneously serves as a pull-out handle, allows simple retrofitting. Subsequent assembly on the existing IDC sockets is possible without a major effort. Order information and dimensional table Number of contacts Part number...

Spring clip for IDC sockets and low profile headers (space-saving design) Features ––Trouble-free assembly ––Economical ––Absolutely solid fit ––Simple disassembly ––For IDC sockets Series 517 with and without strain relief –– General information These spring clips are manufactured from high-grade spring steel. An absolutely solid fit and simple assembly and disassembly are the special features of this product. The spring clips are suitable for IDC sockets, Series 517, with and without strain relief. An economical alternative to conventional lockings. Assembly depiction Assembly depiction...

ODU FLAKAFIX ODU FLAKAFIX Pin headers Series 511

ODU Flakafix Contents Pin headers for Series 511 From page Number codes for ODU FLAKAFIX, Series 511 THT latch headers, DIN EN 60603-13 THT low profile headers (space-saving design) THT pin headers without plug-in frame 3 SMT latch headers DIN EN 60603-13 SMT low profile headers (space-saving design) SMT pin headers without plug-in frame 4 THR latch headers DIN EN 60603-13 THR low profile headers (space-saving design) THR pin headers without plug-in frame

Number codes Explanation of number codes for ODU FLAKAFIX, Series 511 Material property Surface plating 511 = Pin header THT and THR models: Latch headers 060 = Straight assembly, without latch 061 = Straight assembly, with latch, short 062 = Straight assembly, with latch, long 260 = Angled assembly, without latch 261 = Angled assembly, with latch, short 262 = Angled assembly, with latch, long Low profile headers 066 = Straight assembly 266 = Angled assembly Pin headers without plug-in frame 030 = Straight assembly, insulator 6.04 / 2.8 mm 032 = Straight assembly, insulator 5.08 / 2.8 mm...