ODOT-IOT02
44Pages

User’s Manual Add.: No.6 Hongsheng Road, Hi-Tech District, Mianyang, Sichuan, China. Web: www.odotautomation.com

ocM Sichuan Odot Automation System Co., Ltd Powef Supply: 9-3J VDC Op«alin9 Tsmp«n»OT, .4thl!r Symbol description PWR Power status ETH Ethernet status SS Signal strength 4G 4G status C03 3«senal status C04 4#serial status Sichuan odot Automation System Co.. Ud http://www.odot.cn Tel:400-0024485 >t Automation System Co.. Ltd odot.cn \ \ Sichuan Odot Automation System Co., Ltd. 2019-06 Copyright©2019. All Rights Reserved.Add.: N0.6 H0ngsheng Road, Hi-Tech District, Mianyang, Sichuan, China. Web: www.odotautomation.Mffi 2 / 44

od«t Sichuan Odot Automation System Co., Ltd Version Information Ownership Information This User’s Manual shall not be republished partly or entirely in any paper or electronic forms without authorization from the copyright owner. Disclaimer This User’s Manual is only for the purpose to assist the user in the use of the product, and the company is not responsible for any loss or error caused by the use of the information in this document. The products and texts described in this document are constantly being developed and refined. Sichuan Odot Automation System Co., Ltd. has the right to...

Add.: No.6 Hongsheng Road, Hi-Tech District, Mianyang, Sichuan, China. 4 / 44

od*t Sichuan Odot Automation System Co., Ltd 1 Product Overview 1.1 Product Introduction MG-IOT02 is a MODBUS RTU protocol to MODBUS TCP and MQTT protocol converter developed by Sichuan ODOT Automation System Co., Ltd based on market demand and years of experience. Any device with RS485 / RS422 / RS232 interface can be connected to the MODBUS TCP network through this gateway, and to the cloud through MQTT. In this way, low-speed serial devices can be connected to high-speed Ethernet and cloud servers to realize the function of industrial data collection, and at the same time support the...

Od«t Sichuan Odot Automation System Co., Ltd ♦ EMC complies with EN 55022: 2010 & EN55024: 2010 international standards. 1.3 Technical Parameters The relevant technical parameters of this product are shown in "Table 1”. Please use this product within the parameters of this product in order to obtain better performance. Table 1. Technical parameters Add.: No.6 Hongsheng Road, Hi-Tech District, Mianyang, Sichuan, China. Web: www.odotautomation.com

od*t Sichuan Odot Automation System Co., Ltd Add.: No.6 Hongsheng Road, Hi-Tech District, Mianyang, Sichuan, China. Web: www.odotautomation.com

2.2 Indicator Description The device has a total of 6 LED status indicators. The symbol definition and status description are shown in "Table 2”. Table 2. Indicator description Add.: No.6 Hongsheng Road, Hi-Tech District, Mianyang, Sichuan, China. Web: www.odotautomation.com

od*t Sichuan Odot Automation System Co., Ltd Note: *Green The status of MG-IOT02 gateway indicator during normal Add.: No.6 Hongsheng Road, Hi-Tech District, Mianyang, Sichuan, China. Web: www.odotautomation.com

Od-t Sichuan Odot Automation System Co., Ltd 2.3 Terminal Definition The device wiring uses 16Pin 3.81mm pitch plug-in terminal blocks. The terminal definitions of the RS485 / RS232 / RS422 interface are shown in "Table 3”. Table 3. Terminal definitions Add.: No.6 Hongsheng Road, Hi-Tech District, Mianyang, Sichuan, China. Web: www.odotautomation.com

The device has a system reset button RESET. When the user forgets the IP address of the device and port number and cannot connect to the gateway, the reset button can be triggered. The system parameters will be restored to the factory settings and the device will be restarted. The reset button can be clicked with a paper clip. All the indicators flash once to indicate that the reset was successful. The technical parameters of the gateway are as follows: Add.: No.6 Hongsheng Road, Hi-Tech District, Mianyang, Sichuan, China. Web: www.odotautomation.com

od«t Sichuan Odot Automation System Co., Ltd Power supply, 9-35 ypj Oporating Tamper,turs. 5-95WH(«*<»t(|l-w Symbol description PWR Power status ETH Ethernet status SS Signal strength 4G 4G status C03 3#serial status C04 4#serial status Sichuan odot Automation System Co.. Ltd. http://www.odot.cn Tel:400-0024-485 ~ SN^20190307WG0001 3 How to Use the Gateway 3.1 Serial Port Side Collection Channel There is only one Collection channel, Modbus RTU / ASCII channel. The serial port works in Master Mode. This serial port can connect up to 62 Modbus RTU / ASCII slave devices without Relays. This...

Od«t Sichuan Odot Automation System Co., Ltd station. In this way, low-speed serial devices can be connected to high-speed Ethernet and cloud servers to realize the function of industrial data collection. 3.2 Ethernet Port Side Publish Channel There are two modes for the network port side Publish channel, Modbus TCP Publish channel and MQTT Publish channel. Modbus TCP Publish channel The data area has 4K (bit) DO (coil), DI (discrete input) area, and 1K (uint16_t) AO (hold register), and the AI (input register) area is used to store the acquired data. The user can associate the collection...

od*t Sichuan Odot Automation System Co., Ltd Data format (publish/Subscribe) { "version" : "1.0", "params" : { "name" : data, "name" : data, "name" : data, }, "id" : 31359, "method" : "thing.event.property.post" 3.3 Configuring Software Usage 1. Open the configuration software "Odot Configuration Software”, click Tools— Searching, select the local network card, and click Searching. The IOT gateway on the same network segment will be scanned. Click OK to generate an IOT project on the left. If there are multiple IOT gateways on the same network segment, you can click the lighting button, and...

Od«t Sichuan Odot Automation System Co., Ltd corresponding IOT gateway will flash five times to distinguish between multiple MG-IOT02 modules on the same network. s IOT gateway configuration softwar Ethernet Port Network card Device Type Hardware version Software version Subnet mask Gatwayt ip DNS server ip DNS server ip(spare) Enable Dh 2. Double-click "MG-IOT02-4G" in the project bar, and the gateway "Network port” and "Serial port" window and parameters pop up on the right. The two serial ports of MG-IOT02 correspond to serial port 3 and serial port 4 in the configuration software....