Catalog excerpts
od*t Odot Automation System Co., Ltd http:// www.odotautomation.com
Open the catalog to page 1Od»t Odot Automation System Co., Ltd Odot Automation System C°., Ltd* 2020-2 Copyright ©2020 Odot Automation all rights reserved http:// www.odotautomation.com
Open the catalog to page 2Ownership rights information Without the permission of the copyright owner, all or part of this document shall not be republished as a paper or electronic document. Disclaimer This document is only intended to assist the reader in using the products, and the company shall not be responsible for any loss or error caused by the use of the information in this document. The product and text described in this document are under constant development and refinement. Odot Automation System Co., Ltd. has the right to modify this document without notifying users. Software download Please log on the...
Open the catalog to page 3od*t Odot Automation System Co., Ltd http:// www.odotautomation.com
Open the catalog to page 41 Product Overview Remote IO system consists of network adapter module and extended IO module. The network adapter module controls fieldbus communication and it realizes communication link with host station controller or host computer software. The extended IO module controls the connection with the input and output sensors in the field. At first the Input IO module collects the field signals and sends it to the network adapter through the internal bus. Secondly the controller reads and processing data from the adapter through the field bus, and it writes the output data into the network...
Open the catalog to page 5od*t Odot Automation System Co., Ltd High speed backplane bus, the refresh cycle of 32 modules is 1ms. • The channels carry with Complete ODOT status indicator lights. self-design. Multiple input/output modules: DI/DO, AI/AO, special modules, extended power modules. Terminal Module 1.2 Module Layout The ODOT-C series is a remote I/O module. The adapter module lies on the far left, and on the right are extended I/O modules. http:// www.odotautomation.com
Open the catalog to page 61.3 LED Indicators The user can easily check the power state of adapter and I/O module, I/O module operating state, and the number of I/O channels though LED state. And the detailed indicator state should refer to the related adapter or IO modules. 1.4 Ground Protection There is one metal resilient sheet on the back of the module, which is used for effective grounding with the guide rail. The metal resilient sheet and the adapter PE (protective earthing) are connected internally.
Open the catalog to page 7Use push-in method to connect single-wire or crimp terminal wires without any other tools. Users can save wiring time and ensure a safe operation regardless of wiring experience. The module equips with a wiring fixed end for cable harness, which is used to fix the cable when the IO module is wired with multiple cables. 1.6 Installation and Removal DIN-Rail Lock could be safely and reliably installed on 35 mm DIN-Rail. There is a manual closure buckle on the upper side of all modules for locking, and a manual buckle is on the left side of the adapter for locking the guide rail. http://...
Open the catalog to page 8When the module is removed, it needs to manually unlock the guide rail on the upper side of the module. For the adapter module, you also need to unlock the left rail buckle counterclockwise.
Open the catalog to page 9od*t Odot Automation System Co., Ltd Adapter size: 115*51.5*75mm I/O module size: 115*14*75mm 2 Extended IO module CT-623F 8-channel digital input /24VDC/ source or sink type & 8-channel digital output /24VDC/ source type 2.1 Module features ♦ The module supports 8-channel digital input, and supports source type and sink type two-way input. The input voltage is 0V/24VDC. ♦ The module supports 8-channel digital output, Output high level valid, and the output voltage is 24VDC. ♦ Module input channel can collect digital output signal of field equipment. (dry contact or active output) ♦ The...
Open the catalog to page 10od*t Odot Automation System Co., Ltd ♦ Module input channel supports 32-bit counter for each channel, the counting frequency < 200Hz. ♦ The input channel of the module supports the signal maintenance function, and the maintenance time can be set. ♦ The input channel of the module can set the digital signal input filtering time and the byte transfer order of the counter. ♦ The input channel of the module can set the counting mode and counting direction independently. ♦ Module output channel can drive field equipment .(relay, solenoid valve, etc.) ♦ The output channel of the module is...
Open the catalog to page 11od*t Odot Automation System Co., Ltd http:// www.odotautomation.com
Open the catalog to page 12od*t Odot Automation System Co., Ltd © Module Type © State indicators © Channel indicators © Wiring Terminal and Marking © Internal Bus © Field Power © Buckle © Grounding Sheet @ Fixed Wiring Harness http:// www.odotautomation.com
Open the catalog to page 13od*t Odot Automation System Co., Ltd ® Power indicator (red) ® Module state indicator (red/green) © Input/output channel indicators (green) 3.2 Field input channel LED indicator (red/green) di° teipgTI dm 3[0)Wa When the COM terminal is connected to a low level and the input channel signal is at a high level, the corresponding channel green indicator is on. http:// www.odotautomation.com
Open the catalog to page 14When the COM terminal is connected to a high level and the input channel signal is at a low level, the corresponding channel red indicator is on. 3.3 Field output channel LED indicator (green) DOO O' DOI When the output signal of the output channel is valid, the corresponding channel indicator is on. 3.4 Terminal definition Note 1: when the red LED indicator beside the 24V wiring terminal lights up, it indicates that the fieldbus is powered on, then the maximum output current of each channel is 500mA, and the maximum sum of all output channel currents is 2A. When the 24VDC power is supplied...
Open the catalog to page 15High level/Sink input http:// www.odotautomation.com
Open the catalog to page 16od*t Odot Automation System Co., Ltd <8DI&8DO IO State> Submodule procedure data definition http:// www.odotautomation.com
Open the catalog to page 17All ODOT Automation catalogs and technical brochures
-
ODOT C series remote IO
4 Pages
-
BOXIO 64
4 Pages
-
ODOT remote IO catalogue
20 Pages
-
PLC
59 Pages
-
New small ODOT brochure
16 Pages
-
CN-8034
2 Pages
-
CN-8033
2 Pages
-
CN-8032
2 Pages
-
CN-8012
2 Pages
-
CN-8011
2 Pages
-
CN-8031
2 Pages
-
Remote I/O C Series
376 Pages
-
ODOT-MS100T Serial User Manual
15 Pages
-
Remote I/O module
36 Pages
-
CT-7221
17 Pages
-
CT5800
15 Pages
-
CT4234
20 Pages
-
CT3804
21 Pages
-
CT-3713
19 Pages
-
CT3238
19 Pages
-
CT-3158
19 Pages
-
CT2718
18 Pages
-
CT2228
18 Pages
-
CT-222F
19 Pages
-
CT-121F
21 Pages
-
ODOT-S1E1 User Manual 20200720
30 Pages
-
ODOT-S1E1 User Manual 20200720
30 Pages
-
ODOT-PNM02 User Manual_V1.5.
37 Pages
-
MG-IOT03 User Manual_V1
24 Pages
-
ODOT-IOT02
44 Pages
-
ODOT AIOBOX - Integrated IO module
149 Pages
-
ODOT-S7PPIV2.0
31 Pages
-
ODOT-PNM02
31 Pages
-
ODOT-S4E2
56 Pages
-
ODOT-IOT01
79 Pages