od*t Odot Automation System Co., Ltd http:// www.odotautomation.com

Od»t Odot Automation System Co., Ltd Odot Automation System C°-, Ltd-2020-2 Copyright ©2020 Odot Automation all rights reserved http:// w\vw.odotautomation.com

Ownership rights information Without the permission of the copyright owner, all or part of this document shall not be republished as a paper or electronic document. Disclaimer This document is only intended to assist the reader in using the products, and the company shall not be responsible for any loss or error caused by the use of the information in this document. The product and text described in this document are under constant development and refinement. Odot Automation System Co., Ltd. has the right to modify this document without notifying users. Software download Please log on the official...

od*t Odot Automation System Co., Ltd http:// www.odotautomation.com

1 Product Overview Remote IO system consists of network adapter module and extended IO module. The network adapter module controls fieldbus communication and it realizes communication link with host station controller or host computer software. The extended IO module controls the connection with the input and output sensors in the field. At first the Input IO module collects the field signals and sends it to the network adapter through the internal bus. Secondly the controller reads and processing data from the adapter through the field bus, and it writes the output data into the network adapter,...

od*t Odot Automation System Co., Ltd High speed backplane bus, ^ the refresh cycle of 32 modules is 1ms. • The channels carry with status indicator lights. Complete ODOT self-design. Multiple input/output modules: DI/DO, AI/AO, special modules, extended power modules. Terminal Module

od*t Odot Automation System Co., Ltd The user can easily check the power state of adapter and I/O module, I/O module operating state, and the number of I/O channels though LED state. And the detailed indicator state should refer to the related adapter or IO modules. 1.4 Ground Protection There is one metal resilient sheet on the back of the module, which is used for effective grounding with the guide rail. The metal resilient sheet and the adapter PE (protective earthing) are connected internally. 1.5 Wiring http:// www.odotautomation.com

Use push-in method to connect single-wire or crimp terminal wires without any other tools. Users can save wiring time and ensure a safe operation regardless of wiring experience. The module equips with a wiring fixed end for cable harness, which is used to fix the cable when the IO module is wired with multiple cables. 1.6 Installation and Removal DIN-Rail Lock could be safely and reliably installed on 35 mm DIN-Rail. There is a manual closure buckle on the upper side of all modules for locking, and a manual buckle is on the left side of the adapter for locking the guide rail. http:// www.odotautomation.com...

od*t Odot Automation System Co., Ltd When the module is removed, it needs to manually unlock the guide rail on the upper side of the module. For the adapter module, you also need to unlock the left rail buckle counterclockwise. http:// www.odotautomation.com

od*t Odot Automation System Co., Ltd Adapter size: 115*51.5*75mm I/O module size: 115*14*75mm 2 Extended IO module CT-3804: 4 channels Analog Input,Thermocouple ( J type^ K type^ E type^ T typeN Stype^ R typeNB type^ N typeN C type) 1 Module features ♦ The module supports 4-channel thermocouple signal acquisition ♦ The module carries with 4 analog indicators ♦ The module supports 9 kinds of conventional thermocouple temperature measurement type ♦ The internal bus of the module and field input adopts magnetic isolation ♦ The module input channel supports TVS overvoltage protection ♦ 24-bit ADC...

od*t Odot Automation System Co., Ltd http:// www.odotautomation.com

od*t Odot Automation System Co., Ltd © Wiring Terminal and identification © Internal Bus © Field Power © Buckle © Grounding Resilient Sheet @ Fixed Wiring Harness 3.1 LEDLED indicator definition http:// www.odotautomation.com

© Power LED indicator (red) © Module State LED indicator (red/green) © Output channel LED indicator (green)

od*t Odot Automation System Co., Ltd http:// www.odotautomation.com

od*t Odot Automation System Co., Ltd http:// www.odotautomation.com

od*t Odot Automation System Co., Ltd http:// www.odotautomation.com

od*t Odot Automation System Co., Ltd http:// www.odotautomation.com

od*t Odot Automation System Co., Ltd Data Declaration: 16Bit Data Format: Big-endian and little-endian format of data upload: 0: AB http:// www.odotautomation.com

1: B_A TC Input Type(CH 0-3): Sensor type of the channel: 0: Channel is disabled 1: J Type 2: K Type 3: E Type 4: T Type 5: S Type 6: R Type 7: B Type 8: N Type 9: C Type

od*t Odot Automation System Co., Ltd http:// www.odotautomation.com

od*t Odot Automation System Co., Ltd Odot Automation System Co., Ltd. Add: No.6 Hongsheng Road, Hi-Tech District, Mianyang, Sichuan, China. Te l: +86-0816-2538289 Zip Code: 621000 Email:[email protected] Web: www.odotautomation.com http:// www.odotautomation.com 21 / 21 TEL: +86-0816-2538289