CT-222F
19Pages

od*t Odot Automation System Co., Ltd http:// www.odotautomation.com

Od»t Odot Automation System Co., Ltd Odot Automation System C°., Ltd* 2020-2 Copyright ©2020 Odot Automation all rights reserved http:// www.odotautomation.com

Ownership rights information Without the permission of the copyright owner, all or part of this document shall not be republished as a paper or electronic document. Disclaimer This document is only intended to assist the reader in using the products, and the company shall not be responsible for any loss or error caused by the use of the information in this document. The product and text described in this document are under constant development and refinement. Odot Automation System Co., Ltd. has the right to modify this document without notifying users. Software download Please log on the...

od*t Odot Automation System Co., Ltd http:// www.odotautomation.com

1 Product Overview Remote IO system consists of network adapter module and extended IO module. The network adapter module controls fieldbus communication and it realizes communication link with host station controller or host computer software. The extended IO module controls the connection with the input and output sensors in the field. At first the Input IO module collects the field signals and sends it to the network adapter through the internal bus. Secondly the controller reads and processing data from the adapter through the field bus, and it writes the output data into the network...

od*t Odot Automation System Co., Ltd High speed backplane bus, the refresh cycle of 32 modules is 1ms. • The channels carry with Complete ODOT status indicator lights. self-design. Multiple input/output modules: DI/DO, AI/AO, special modules, extended power modules. Terminal Module 1.2 Module Layout The ODOT-C series is a remote I/O module. The adapter module lies on the far left, and on the right are extended I/O modules. http:// www.odotautomation.com

The user can easily check the power state of adapter and I/O module, I/O module operating state, and the number of I/O channels though LED state. And the detailed indicator state should refer to the related adapter or IO modules. 1.4 Ground Protection There is one metal resilient sheet on the back of the module, which is used for effective grounding with the guide rail. The metal resilient sheet and the adapter PE (protective earthing) are connected internally.

Use push-in method to connect single-wire or crimp terminal wires without any other tools. Users can save wiring time and ensure a safe operation regardless of wiring experience. The module equips with a wiring fixed end for cable harness, which is used to fix the cable when the IO module is wired with multiple cables. 1.6 Installation and Removal DIN-Rail Lock could be safely and reliably installed on 35 mm DIN-Rail. There is a manual closure buckle on the upper side of all modules for locking, and a manual buckle is on the left side of the adapter for locking the guide rail. http://...

When the module is removed, it needs to manually unlock the guide rail on the upper side of the module. For the adapter module, you also need to unlock the left rail buckle counterclockwise.

od*t Odot Automation System Co., Ltd Adapter size: 115*51.5*75mm I/O module size: 115*14*75mm 2 Extended IO module CT-222F 16 channel digital output/24VDC/source type 1 Module features ♦ the module supports 16 channels digital output, the output high level is valid, the output voltage is 24VDC. ♦ module can drive field equipment. (relay, solenoid valve, etc.) ♦ the internal bus of the module and field output are using opto-coupler. ♦ the module has 16 digital output channel LED indicator light. ♦ the module has the functions of thermal shutdown and overcurrent protection. ♦ the module...

od*t Odot Automation System Co., Ltd

od*t Odot Automation System Co., Ltd © Module Type © State indicator © Channel indicator © Wiring Terminal and identification © Internal Bus © Field Power © Buckle © Grounding Resilient Sheet @ Fixed Wiring Harness © Power indicator light (red) © Module State indicator light (red/green) © Output channel indicator light (green) PW Power State http://'www.odotautomation.com

Note 1: when the red LED indicator beside the 24V wiring terminal is on, it indicates that the fieldbus is powered on, then the maximum output current of each channel is 500mA, and the maximum sum of all output channel currents is 4A. When the 24VDC power is supplied to the 24V wiring terminal separately, the maximum sum of all the output channel currents is 8A (Regardless of whether the fieldbus is powered or not, 24V wiring terminals can be connected to 24VDC power supply).

od*t Odot Automation System Co., Ltd http:// www.odotautomation.com

od*t Odot Automation System Co., Ltd Data description: Fault Action for Output Ch#(0-15): Fault Output mode. When the IO module detects an internal bus exception and fails to communicate with the adapter. And the module will turn to offline mode, so the output data is processed in this way. (default: 0) http:// www.odotautomation.com

0: keep the last time output State. 1: output fault value. Fault Value for Output Ch#(0-15): when the Fault Output mode is 1, this bit sets the Fault Output Value, and this setting value will be outputted when the interal bus of IO module is offline. (default: 0) 0: Output low level. 1: Output high level.

od*t Odot Automation System Co., Ltd http:// www.odotautomation.com UOnn ll^nn

______________________________________________________________ Odot Automation System Co., Ltd. Add: No.6 Hongsheng Road, Hi-Tech District, Mianyang, Sichuan, China. Tel: +86-0816-2538289 Zip Code: 621000 Email:sales@odotautomation.com Web: www.odotautomation.com http:// www.odotautomation.com