1. Catalogs
  2. ODOT Automation
  3. AIO-MT124F MiniBoxIO User Manual_V1

AIO-MT124F MiniBoxIO User Manual_V1

AIO-MT124F MiniBoxIO User Manual_V1
1 / 30 PagesView full catalog

AIO-MT124F MiniBoxIO User Manual_V1

Product catalog summary
Product Overview
Product Introduction: The AIO-MT124F is an Ethernet-based integrated IO module featuring 16 input channels. It supports both RS485 (Modbus-RTU) and Ethernet (Modbus-TCP) communication, allowing access by up to 5 Modbus TCP clients simultaneously. The module is encased in a durable metal shell with anti-corrosion properties and supports daisy chain topology for simplified wiring.
Technical Parameters: The module includes 16 channels with source and sink input capabilities, dual Ethernet ports, and a Modbus RTU RS485 port. It operates within a voltage range of 9-36V DC and can withstand temperatures from -40 to 85℃. It has an IP20 rating and features optocoupler isolation for I/O to internal bus.

Hardware Description
Appearance and Indicators: The module is equipped with indicators for power, device faults, Modbus communication status, and IO running status.
System Power and Communication Interface: It supports Modbus-TCP and Modbus-RTU/ASCII protocols, with Ethernet ports that allow cascading and an RS485 port for bus connection.
Modbus MAC Address: The document specifies register addresses for digital input and count values, with a maximum input signal frequency of 200Hz.

Configuration Software Usage
The manual provides detailed instructions for setting up the module using configuration software, including IP address configuration, module scanning, and parameter modification.

MODBUS POLL Software Test
Testing via Ethernet Port: Instructions are provided for connecting and configuring the MODBUS POLL software to test the module via the Ethernet port.
Testing via Serial Port: The document outlines the process for testing the module using the RS485 serial port, including connection setup and parameter configuration.

Device Firmware Upgrade
The manual describes the firmware upgrade process using the AIO-Box configuration software, including checking the current version information.

Upgrade Procedure for Adapter Module AIO-MT124F
1. Accessing the Upgrade Menu: Click the designated area on the right side of the upgrade menu.
2. Selecting the Upgrade File: In the pop-up window, select the upgrade file for the adapter module AIO-MT124F.
3. Viewing Upgrade Information: View the upgrade version and additional information in the lower left side of the upgrade interface. If the firmware version is consistent, no update is needed. If inconsistent, click 'Start upgrading' to proceed.

Contact Information: Sichuan Odot Automation System Co., Ltd. is located at No.6 Hongsheng Road, Hi-Tech District, Mianyang, Sichuan, China. For inquiries, contact via phone at +86-0816-2538289 or email at [email protected]. More information is available on their website www.odotautomation.com.
See more

Catalog excerpts

AIO-MT124F MiniBoxIO User Manual_V1-1

od-t Sichuan Odot Automation System Co., Ltd http: // www.odotautomation.com

 Open the catalog to page 1
AIO-MT124F MiniBoxIO User Manual_V1-2

od-t Sichuan Odot Automation System Co., Ltd Prroduct Name: AI0B0X 10 Module Product Series: MimBOX Product Model AIOBOX-MT124F Power Supply: 9-36 VDC Operating Temperature -40-65 C Humidity: 5-95SRH(non-condensuig) LED Sratus PWR Power status DF device Fault RUN Modbus RUN ERR Communication Error IRN 10 RUN NC Not Used Sichuan Odot Automation system Co. Lli http://www odot cn Tel/QQ 400-1024-485 Copyright©2010 All rights reserved by Odot Automation http: // www.odotautomation.com

 Open the catalog to page 2
AIO-MT124F MiniBoxIO User Manual_V1-3

od-t Sichuan Odot Automation System Co., Ltd Ownership information Without the consent of the copyright owner, part or whole of this document are not allowed to be republished in paper or electronic document. Disclaimer This document shall only be used to assist readers for the using of our products and the company shall not be responsible for any loss or error caused by the information in this document. The text and product described in this document is constantly developing and improving. Sichuan Odot Automation System Co., Ltd. has the right to modify this document without notifying users....

 Open the catalog to page 3
AIO-MT124F MiniBoxIO User Manual_V1-4

http:// www.odotautomation.com

 Open the catalog to page 4
AIO-MT124F MiniBoxIO User Manual_V1-5

Od-t Sichuan Odot Automation System Co., Ltd 1 Product Overview 1.1 Product Introduction MiniBox series IO module: AIO-MT124F is an Ethernet based integrated IO module, with 16 input channels. This product supports the use of RS485 interface (Modbus-RTU) and Ethernet interface (Modbus-TCP) for communication, and supports the simultaneous access of 5 Modbus TCP clients. It is simple and convenient to use with stable transmission, full metal shell and strong anti-interference ability. The internal PCB adopts anti-corrosion technique including anti-corrosion, anti-oxidation and anti-salt mist. Its...

 Open the catalog to page 5
AIO-MT124F MiniBoxIO User Manual_V1-6

Firing Current http: // www.odotautomation.com

 Open the catalog to page 6
AIO-MT124F MiniBoxIO User Manual_V1-7

ocf •t Sichuan Odot Automation System Co., Ltd Power wiring and RS485 Channel Gateway Indicator Wiring Terminal Product Name: AI080X10 Module Product Series: MimBOX Product Model: AIOBOX-MT124F Power Supply 9*36 VDC Operatng Temperature -aWIS'-C Hjnldity S*95WtH (norvconderang) jnal Indicator LED Status PWR Power status OF Device Fault RUN Modbus RUN ERR Communication Erw IRN IORUN NC No! Used Sdiuan Odol Automation System Co Ltd nap //wwwodder TeVGQ 400-102<-*85 Buckle 2.2 Indicator Description Symbol http: // www.odotautomation.com

 Open the catalog to page 7
AIO-MT124F MiniBoxIO User Manual_V1-8

od-t Sichuan Odot Automation System Co., Ltd 2.3 System Power and Communication Interface A. System Power and Communication Ports Definition It supports standard Modbus-TCP and Modbus-RTU/ASCII protocol access. The Ethernet supports cascade function of dual Ethernet port switch, and the serial port supports RS485 bus connection mode. http: // www.odotautomation.com

 Open the catalog to page 8
AIO-MT124F MiniBoxIO User Manual_V1-9

od-t Sichuan Odot Automation System Co., Ltd B. Terminal wiring diagram and definition Digital input module AIOBOX-MT124F has 16 digital input channels, and the module is simple for wiring and easy for operation. The specific wiring diagram is as follows. 1 DIO 2 Dll 3 DI2 4 DI3 5 DI4 6 DI5 7 DI6 8 DI7 9 COA 10 NC 11 DI8 12 DI9 13 DI10 14 Dill 15 DM2 16 DM3 17 DI14 18 DI15 19 COB 20 NC http: // www.odotautomation.com

 Open the catalog to page 9
AIO-MT124F MiniBoxIO User Manual_V1-10

od-t Sichuan Odot Automation System Co., Ltd http: // www.odotautomation.com

 Open the catalog to page 10
AIO-MT124F MiniBoxIO User Manual_V1-11

od-t Sichuan Odot Automation System Co., Ltd Dada description: MAC Address [0-5]: Device MAC address (read only) IP Address[0-3]: Device IP address (Default: 192.168.1.100) Net Mask[0-3]: Device subnet mask (Default: 255.255.255.0) Net Gateway[0-3]: Device subnet gateway (Default: 192.168.1.1) Modbus Port: Modbus Port no. (Default: 502) Effective range: 0-65535 Watchdog Enable: Modbus Watchdog enable (Default: 1) 0: Watchdog disabled 1 : Watchdog enabled Watchdog Time(s): Watchdog time (Default: 10) Effective range: 1-65535 Slave ID: Modbus slave station ID no. (Default: 1) Effective range: 1-247...

 Open the catalog to page 11
AIO-MT124F MiniBoxIO User Manual_V1-12

od-t Sichuan Odot Automation System Co., Ltd 0: No parity 1: Odd 2: Even Stop Bits: stop bit (Default: 1) 1: 1 stop bit 2: 2 stop bit Serial Mode: serial mode (Default: 0) 0: RTU mode 1: ASCII mode Char Pitch: inter-frame space (Default: 2) 0: 1.5t 1: 3.5t 2: 5t 3: 10t 4: 20t 5: 50t 6: 100t 7: 200t Respond Delay: Slave station replying delay time (Default: 0) Effective range: 0-65535

 Open the catalog to page 12
AIO-MT124F MiniBoxIO User Manual_V1-13

od-t Sichuan Odot Automation System Co., Ltd Data description: Input Filtering Time(ms): channel input filtering time, unit ms (Default: 10) Counter Value Data Format: The byte transfer sequence of channel count value (Default: 0) 0: A-B-C-D 1: B-A-D-C 2: C-D-A-B 3: D-C-B-A Input Holding Time(ms): input holding time, unit ms (Default: disable) Storage Enable: storage enabled (Default: disable) Count Mode Ch#(0-15): input channel count mode (Default: 0) 0: Rising edge count 1 : Falling edge count 2: Double edge count Count Direction Ch#(0-15): input channel count direction (Default: 0) 0: Counting...

 Open the catalog to page 13
AIO-MT124F MiniBoxIO User Manual_V1-14

Od*t Sichuan Odot Automation System Co., Ltd Prroduct Name: AI0B0X10 Module Product Series: MiniBOX Product Model: AIOBOX-MT124F Power Supply: 9-36 VDC Operating Temperature: -40-85“ C Humidity: 5'95%RH(non-condensing) LED Sratus PWR Power status OF device Fault RUN Modbus RUN ERR Communication Error IRN 10 RUN NC Not Used Sichuan Odot Automation system Co-Ltd pttp:Wwww.odoUn Tel/QQ 400-1024-485

 Open the catalog to page 14
AIO-MT124F MiniBoxIO User Manual_V1-15

od-t Sichuan Odot Automation System Co., Ltd 3 Configuration Software Usage 1. Double-clicking on my computer, open the network and sharing center under the control panel, and set the COMPUTER IP and module IP in the same network segment. If the default IP of module is 192.168.1.100, then the IP of computer should be 192.168.1. X (1<X<254,X^100) 2 .After installing AIO-Box config software, opening the configuration software, clicking File ^ Project ^ New Project in the menu bar, or right clicking Project ^ New Project in the project directory bar, and entering the project name manually. http:...

 Open the catalog to page 15
AIO-MT124F MiniBoxIO User Manual_V1-16

3. In the project directory bar, right-clicking the Project Name → Upload IO module, and selecting scan module in the pop-up dialog box, selecting local network card, and clicking Search Device to scan AIO-MT124F module. http:// www.odotautomation.com

 Open the catalog to page 16

All ODOT Automation catalogs and technical brochures

  1. C3351

    8  Pages

  2. BOXIO 64

    4  Pages

  3. PLC

    59  Pages

  4. CN-8034

    2  Pages

  5. CN-8033

    2  Pages

  6. CN-8032

    2  Pages

  7. CN-8012

    2  Pages

  8. CN-8011

    2  Pages

  9. CN-8031

    2  Pages

  10. CT-7221

    17  Pages

  11. CT5800

    15  Pages

  12. CT4234

    20  Pages

  13. CT3804

    21  Pages

  14. CT-3713

    19  Pages

  15. CT3238

    19  Pages

  16. CT-3158

    19  Pages

  17. CT2718

    18  Pages

  18. CT2228

    18  Pages

  19. CT623F

    23  Pages

  20. CT-222F

    19  Pages

  21. CT-121F

    21  Pages

  22. ODOT-S7PPIV2.0

    31  Pages

  23. ODOT-PNM02

    31  Pages

  24. ODOT-S4E2

    56  Pages

  25. ODOT-IOT01

    79  Pages

  26. ODOT-IOT02

    44  Pages

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.