General Catalogue
General Catalogue
- Water Solenoid Valves: Models include 21A N.C./N.O., 21A PROP N.C., and 21L N.C./N.O., with configurations for normally closed (N.C.) and normally open (N.O.) operations.
- Chemical Solenoid Valves: Explosion-proof models like 21A Ex d & Ex m N.C./N.O. for hazardous environments.
- Steam Solenoid Valves: High-temperature models such as 21A16 N.C. and 21YW-YN N.C./N.O. for steam applications.
- Air Solenoid Valves: Models like 21A N.C./N.O. and 31A N.C. for air control systems.
- Vending Solenoid Valves: Tailored for vending machines, including models like 21D-K N.C. and 21JP N.C.
- Warranty: 12 months from consignment date, covering material and workmanship defects.
- Returns: Require prior authorization and may incur a restocking fee of at least 20%.
- Contractual Obligations: Emphasizes order confirmation and modification conditions, excluding system design and installation.
- Technical Data: Information is suggestive and not binding unless specified, with rights to modify for improvements.
- Transport and Packaging: Client bears transport risks unless otherwise stipulated, with claims within eight days of receipt.
- Pricing and Payments: Prices subject to change without notice, with discounts valid for thirty days. Late payments incur interest.
- Warranty and Liability: ODE repairs or substitutes dysfunctional products within a reasonable time, excluding warranty on incorrectly used or unauthorized modified products.
- Supplier Responsibility: ODE ensures product functionality as per the catalogue but not for defects caused by clients or third parties.
- Retention of Title: Products remain ODE's property until full payment is made.
- Applicable Laws: Governed by Italian law, with disputes handled by the Court of Jurisdiction of Milan.
- Components and Functioning: Describes solenoid valve components and functioning, including normally closed and open direct acting solenoid valves.
- Operational Notes: Highlights pressure differences for correct functioning and potential issues if pressure exceeds specifications.
- Materials include brass, stainless steel, and various seals.
- Compatible with a range of media, including oils, gases, and steam.
- Temperature and pressure limits specified for different seal types.
- Valves can be mounted in any position.
- Maintenance and instruction sheets included.
- Repair kits and coils available as spares.
- Low lead brass for food grade, nickel plated version, NSF approved version, and more.
- Wide range of application valves for liquids and gas.
- Reliable design with high flow.
- Small poppet valve for tight shutoff.
- Electrical plugs, antihumidity kit, and timer for automatic switch.
- Available for normally closed and open configurations.
- Various coil types with different power ratings.
- Models with different orifice sizes and pressure ratings.
- Body material: Anodized Aluminium.
- Armature tube: Brass with Nickel Plating or Stainless Steel.
- Plungers and springs made of Stainless Steel.
- Body material: Brass or Stainless Steel.
- Media compatibility: mineral oils, gasoline, diesel, air, inert gases, water.
- Design pressure: 40 bar.
- Protection class: Ex m IP65 and Ex d IP65.
- Mountable in any position.
- Includes maintenance and instruction sheets.
- Fluid temperature range: -10°C to +140°C with FKM seals.
- Design pressure: 16 bar.
- Protection class: IP65 with electric plug.
- Solenoid valves can be mounted in any position.
- Includes holes and threaded connections for panel fixing.
- Light and reliable design.
- Operates up to 15 bar.
- Repair kits are available; consult the technical department for spare parts.
- Body Material: Various materials including Brass, Stainless Steel, Aluminium, PSU, and PPS.
- Armature Tube: Stainless Steel AISI 300 series or Brass.
- Plungers and Springs: Stainless Steel AISI 400 and 300 series.
- Media Compatibility: Suitable for low pressure steam, mineral oils, gasoline, diesel, fuel oils, water, lubricated air, inert gases, and steam.
- Temperature Range: Fluid temperatures range from -10°C to +140°C depending on the seal material.
- Design Pressure: Up to 40 bar for certain models.
- Protection Class: IP65 with complete electric plug.
- Electrical Conformity: IEC 335 standard.
- Switching Time: 20-40 milliseconds.
- Solenoid valves can be mounted in any position.
- Holes and threaded connections are available for panel fixing.
- Maintenance instructions are included with each valve.
- Repair kits and coils are available as spares.
- Manual override and NSF approved versions are available on request.
- Explosion-proof coils are available (Atex section).
- Low lead brass options for food-grade applications.
- Various electrical plugs and antihumidity kits are available.
- 3/2 Direct Acting Solenoid Valves: Compact design, suitable for up to 15 bar, with adjustable coils.
- 5/2 Way Servocontrolled Solenoid Valves: Made from Aluminium, suitable for lubricated air, with a design pressure of 10 bar.
- 2/2 Way Modular Valves: Brass body, suitable for water, with a design pressure of 20 bar.
- Total Separation Solenoid Valves: Made from PSU or PEI, suitable for hot water applications, with flow regulation capabilities.
- Valves are available in normally closed (N.C.) configurations.
- Various coil types and power ratings are available, including Class F and Class H.
- Specific models are NSF certified for food-grade applications.
- The document includes dimensional tables and drawing references for installation guidance.
- Fluid temperature range: -10°C to +140°C with FKM seals.
- Design pressure: 16 bar.
- Protection class: IP65 with electric plug.
- Electrical conformity: IEC 335.
- Switching time: 20-40 milliseconds.
- Solenoid valves can be mounted in any position.
- Includes holes and threaded connections for panel fixing.
- Maintenance and instruction sheets are provided with each solenoid valve.
- Light and reliable design.
- Operates up to 15 bar.
- Proven actuation system.
- Repair kits are available; consult the technical department for spare parts.
- Body material: Anodized Aluminium.
- Armature tube: Brass with Nickel Plating or Stainless Steel.
- Plungers and springs made of Stainless Steel.
- Ambient temperature: -10°C to +40°C.
- Protection class: IP65.
- Electrical conformity: IEC 335.
- Switching time: 20-40 milliseconds.
- NSF approved version.
- Explosion proof coil Ex nA (Atex section).
- Various electrical plugs and antihumidity kits available.
- Timer for automatic switch.
- Body material: Brass or Stainless Steel.
- Media compatibility: mineral oils, gasoline, diesel, air, inert gases, water.
- Design pressure: 40 bar.
- Protection class: Ex m IP65 and Ex d IP65.
- Conforms to Atex Directive 94/9/CE ATEX.
- Mountable in any position.
- Includes maintenance and instruction sheets.
- Fuse selection guidance provided in the instruction sheet.
1. Solenoid Valves: These are 2/2 way direct acting valves suitable for various media including water, steam, mineral oils, and gases. They operate within a fluid temperature range of -40°C to +180°C depending on the seal material used (RUBY, PTFE, POM C, PBT). The design pressure varies from 40 bar to 150 bar based on the model.
2. Protection and Electrical Conformity: The valves have protection classes of IP65 and IP67 and conform to IEC 335 standards. Switching time ranges from 20-40 milliseconds.
3. Materials: The body materials include Brass UNI EN 12165 CW617N and Brass UNI EN 12164 CW614N. Other components like the armature tube, plungers, and springs are made from stainless steel.
Installation and Maintenance
1. Installation: Solenoid valves can be mounted in any position. Maintenance instructions are provided with each valve.
2. Repair Kits: Available for normally closed and open configurations, with specific kits for different models.
Accessories
1. Electrical Plugs: Various models are available, including those with OR screws and cable options.
2. Antihumidity Kit: Provides protection up to IP67 when used with specific plugs.
3. Condensate Removal Timer: Designed for drain valves, it allows easy programming of time cycles with adjustable on and off times.
Valve Features
1. Angle Seat Pilot Valves: These valves are pneumatically actuated and feature a high flow rate configuration, long life cycles, and are convertible between normally closed and open states.
2. Technical Specifications: Made from stainless steel AISI 316, they operate within a fluid temperature range of -10°C to +180°C and an environment temperature of -10°C to +60°C.
Additional Features
1. Position Indicators: Available for certain models, providing visual feedback on valve status.
2. ATEX Cable Gland: Suitable for explosive environments, offering protection up to IP66/68.
Summary: This document provides detailed specifications and installation guidelines for solenoid and angle seat pilot valves, highlighting their versatility in handling various media and operating conditions. It also outlines the available accessories and repair kits to ensure optimal performance and maintenance.
The document outlines various technical specifications for connectors and coils, including standards, number of contacts, supply voltage, operating and maximum current, contact resistance, maximum conductor section, housing material, cable entry, cable diameter, protection class, and sealing. The connectors comply with EN 175301-803 and have protection classes IP 65 or IP 67 according to EN 60529.
Procedures and Standards:
The document specifies compliance with the ATEX Directive 94/9/CE for potentially explosive environments, indicating the protection categories and temperature ratings for different coil types. It also mentions the need for external fuses to protect the coils.
Recommendations:
Recommendations include ensuring fluid filtration to prevent impurities from affecting solenoid valve operation and using appropriate fuses for coil protection. The document also advises on the nominal voltage tolerances for both AC and DC coils.
Coil Specifications:
Detailed specifications for various coil types (BDA, BDV, GDH, GDV, LBA, LBF, LBV, UDA, UDV, TNA) are provided, including housing material, winding class, electrical connections, protection degree, nominal voltage tolerances, and ambient temperature ranges. The document lists compatible coils and spare parts codes.
Performance Data:
Performance data for solenoid pumps, such as the PX50 Series, is included, showing pressure versus flow rate curves and application areas like coffee machines and steam ironing stations.
- Outlet: G 1/8
- Pressure: 15 bar
- Fluids: Tap Water/Distilled Water
- Max Ambient Temperature: 35°C
- Max Fluid Temperature: 35°C
- Dead Head Pressure: See Performance Chart
- Free Flow Rate: See Performance Chart
- Power Consumption (max.): 53W
- Operating Voltage: 100Vac 50Hz/60Hz (JET), 120Vac 60Hz (UL), 230Vac/50Hz (VDE)
- Working Cycle: 1.0 min ON, 1 min OFF
- Coil Insulation: Class F (155°C), Class H (180°C)
- Terminals: 6.3mm x 0.8mm Faston type
- Endurance: 18,000 cycles (at 8-10 bar)
- Coil Encapsulation: 750°C GWI
- Plunger: Stainless Steel
- Spring: Stainless Steel
- No return valve: Synthetic Rubber
- Seal: NBR or equivalent
- Plastic parts: PA66 Based Plastics
- CE, NSF, UL 778, VDE (IEC 60335-1, 60335-2-41): Proven sealing system for reliable and long life application
- ISO 9001:2008: Quality Management System Certification
- VDE Approval: Certification for electrical, electronic, and information technologies
- REACH Declaration: Compliance with European Regulation n. 2006/1907/EC
- RoHS Directive: Compliance with EU Directive 2011/65/EU
- ATEX Directive: Certification for use in potentially explosive atmospheres
- CE Declaration of Conformity: Compliance with various European Directives and Standards
- ISO 14001:2004: Environment Management System Certification
- OHSAS 18001:2007: Health and Safety Management System Certification
- WMT Laboratory Certification: Authorization for product testing under IMQ supervision
- UL – UL CSA Component Approval: Approval for Canadian market
- NSF Product Approval: Compliance with food safety standards
- PED 97/23/CE Declaration: Compliance with Pressure Equipment Directive
- Part Numbers: P992124-AP (230V 50Hz), P992182-AP (120V 60Hz)
- ODE S.r.l.: Registered Office and Work Plant in Colico, Commercial and Administration Office in Segrate
- Contact: [email protected], www.ode.it
Catalog excerpts
GENERAL CATALOGUE SOLENOID VALVES
Open the catalog to page 1
HOW TO READ THE CATALOGUE In order to identify more easily the product of your interest, we have developed two different indices that will help you in the search. TWO DIFFERENT INDEXES FOR YOUR PRODUCTS RESEARCH. GENERAL INDEX - page 6-7 GENERAL INDEX GENERAL INDEX MACROSECTOR INDEX HIGH PRESSURE SOLENOID VALVES AIR OPERATED VALVES ABOUT US GENERAL INFORMATION GENERAL SALES CONDITIONS MACROSECTOR INDEX - page 8-11 ABOUT ODE SOLENOID VALVES FUNCTIONING PINCH SOLENOID VALVES 4 21Z N.C./N.O. 4 31Z N.C. EXPLOSION PROOF SOLENOID VALVES ATEX 4 21A Ex d & Ex m N.C./N.O. 4 21IH Ex d N.C. 4 21L Ex m,...
Open the catalog to page 3
GENERAL INDEX GENERAL INDEX HOW TO READ THE CATALOGUE page. 4 MACROSECTOR INDEX page. 8-11 GENERAL SALES CONDITIONS page. 14-15 GENERAL INFORMATION page. 16-22 ABOUT ODE SOLENOID VALVES FUNCTIONING GENERAL PURPOSE SOLENOID VALVES page. 25 HIGH PRESSURE SOLENOID VALVES page. 99 AIR OPERATED VALVES page. 103 VIBRATION PUMPS page. 129 CERTIFICATIONS AVAILABLE page. 132 TECNOPOLYMER SOLENOID VALVES page. 67 PINCH SOLENOID VALVES page. 77 EXPLOSION PROOF SOLENOID VALVES ATEX
Open the catalog to page 4
MACROSECTOR INDEX MACROSECTOR INDEX
Open the catalog to page 5
MACROSECTOR INDEX MACROSECTOR INDEX ► 21A N.C./N.O. page 26-27 BDA-BDV-BSA-BVA " 118-119
Open the catalog to page 6
ABOUT US ODE is a leading company since 1960 in designing and manufacturing a complete line of solenoid valves and pumps able to satisfy to all our customers needs. ODE is headquartered in Milan, Italy, with the manufacturing plant in Colico, close to the Swiss border. In 2010 we celebrated 50 years of design and manufacturing excellence in the solenoid valves industry. Our general purpose and customized valves are designed to operate very effectively in the coffee machines industry. THE CONCEPT OF QUALITY HAS ALWAYS BEEN PART OF ODE CULTURE AND MISSION. ODE’s products are manufactured, assembled...
Open the catalog to page 7
GENERAL SALES CONDITIONS GENERAL SALES CONDITIONS ATTENTION Read carefully the conditions of sale before purchase 1 Subject The present conditions represent all current and future contractual relations for ODE product suppliers. 8.4 Any future disputes that occur between the parties do not exempt the Client from the obligation to observe the terms and conditions of payment. 2 Contract Preparation 2.1 The supply contract is concluded with the emission of the order confirmation on behalf of ODE. If ODE does not accept part or all of the order, modifications to the order required will be sent in...
Open the catalog to page 8
GENERAL INFORMATION ABOUT ODE SOLENOID VALVES FUNCTIONING GENERAL INFORMATION 1.1 2/2 way normally closed direct acting solenoid valves This chapter illustrates some of the technical terms used in the ODE catalogue. Main components: body with main orifice, complete armature tube + complete plunger (normally closed kit), coil. Fixed core: component in ferrous-magnetic material which, due to the effect of a magnetic field generated from the coil, attracts the plunger. Plunger: component in ferrous-magnetic material which, under the effect of a magnetic field, moves towards the fixed core causing...
Open the catalog to page 9
GENERAL INFORMATION ABOUT ODE SOLENOID VALVES FUNCTIONING GENERAL INFORMATION 1.3 2/2 way normally closed solenoid valves with pilot control 1.5 2/2 way normally closed combined operation solenoid valves Main components: body with main orifice, cover, diaphragm (or piston) assembly, complete armature tube, + complete plunger (normally closed kit), coil. Main components: body with main orifice, cover, diaphragm (or piston) assembly, complete armature tube + complete plunger, coil. Functioning: 2/2 way normally closed solenoid valves with pilot control have an inlet pipe and a outlet pipe. The...
Open the catalog to page 10
GENERAL INFORMATION ABOUT ODE SOLENOID VALVES FUNCTIONING GENERAL INFORMATION 1.6 Proportional direct acting solenoid valves 3.1 Single solenoid valves for automatic drink-dispensers Main components: body with main orifice, complete armature tube + adjustment screws + plunger + gasket, coil. Main components: body, lower body with orifice, complete armature tube + fixed core + plunger + cap gasket (2 way kit), coil. Functioning: Proportional direct acting solenoid valves have an inlet and an outlet pipe. The plunger, on which a sealing gasket is mounted, provides directly for opening and closing...
Open the catalog to page 11
GENERAL INFORMATION ABOUT ODE SOLENOID VALVES FUNCTIONING Main components: solenoid valve body, profiled shaft, pistons, spring where required, 3 way kit, coil. 5 way solenoid valves are divided into two distinct groups: pneumatic return and spring In pneumatic return 5 way solenoid valves, the coil energizing or de-energizing and on the conseguent opening or closing of a pilot orifice an unbalance of forces is created on two pistons of different section, fixed to a suitably profiled shaft which moves, putting the inlet pipe (pipe 1) in communication with one of the other 4 pipes and putting...
Open the catalog to page 12
Solenoid Valve 2/2 Way Direct Acting Model valve 4 Wide range of application valves for liquids and gas 4 Reliable proven design with high flow 4 Small poppet valve for tight shutoff 4 Wide range of elastomers 4 Mountable in any position TECHNICAL SPECIFICATION 4 Body material: Brass UNI EN 12165 CW617N 4 Armature tube: Stainless Steel AISI 300 series 4 Plungers: Stainless Steel AISI 400 series 4 Spring: Stainless Steel AISI 300 series 4 Media: mineral oils, gasoline, diesel, fuel oils water, air, inert fluids, inert gases, steam 4 Ambient temperature: See coils catalogue page for its compatibility...
Open the catalog to page 14
► Flow control solenoid valve ► Good repeability and low isteresys Different flow curves depending on the coil (contact our Customer Service)
Open the catalog to page 15
FEATURES 4 Specially designed for compressor use 4 Heavy duty design for high number of cycles 4 High working temperature 4 Body material: Brass UNI EN 12165 CW617N 4 Armature tube: Stainless Steel AISI 300 series (21A2) 4 Welved armature tube: Brass - UNI EN 12165 CW617N + Stainless steel AISI 300 series (21PW) 4 Plungers: Stainless Steel AISI 400 series 4 Spring: Stainless Steel AISI 300 series 4 Media: air, inert gases, water 4 Ambient temperature: See coils catalogue page for its compatibility 4 Fluid temperature: -10°C +140°C with FKM seals -10°C +140°C with H-NBR seals -10°C +180°C with...
Open the catalog to page 16All ODE catalogs and technical brochures
PX50 Series1 Page
21W Ex m, Ex d N.C/N.O.1 Page
21X Ex m, Ex d N.C.1 Page
21IH Ex d N.C.1 Page
31Z N.C.1 Page
31A N.C.1 Page
31JN N.C.1 Page
21A PROP N.C.1 Page
21HT-HN-HF N.C./N.O.1 Page
21T N.C.1 Page
high-pressure1 Page
21HT-HN-HF series14 Pages
21A Proportional series12 Pages
21A series38 Pages
21IA-5 Series2 Pages
21IA4T8 Pages
MD01-03-04 Series1 Page
Product Range Brochure8 Pages
Gas Range Brochure7 Pages
Coffee Range Brochure7 Pages
21IA series4 Pages
Fast Delivery Service2 Pages
Chinese Catalogue104 Pages
Archived catalogs
Carwash brochure5 Pages
ODE company profile21 Pages
Solenoid valve for chemistry8 Pages
Steam solenoid valves8 Pages
Water solenoid valves 3/8"-2"12 Pages
- Industrial pump
- Pump with electric motor
- Stationary pump
- Seawater pump
- Manual valve
- Control valve
- Stainless valve
- Water valve
- Stainless steel pump
- Pneumatic valve
- Regulating valve
- Gas solenoid valve
- 2-way solenoid valve
- NC solenoid valve
- Direct-operated solenoid valve
- Pneumatically-operated valve
- Metal solenoid valve