Solenoid Valve 3/2 Direct Acting FEATURES 4 Threaded exhaust connection 4 Reliable performance 4 Suitable with triple certification UL, CSA, VDE 4 High flow TECHNICAL SPECIFICATION AVAILABLE ON REQUEST Body material: Brass UNI EN 12165 CW617N Armature tube: Stainless Steel AISI 300 series Plungers: Stainless Steel AISI 400 series Spring: Stainless Steel AISI 300 series Media: mineral oils, gasoline, diesel, air, inert gases, water, steam, fuel oils, hot water, Ambient temperature: See coils catalogue page for its compatibility Fluid temperature: -10°C +140°C with FKM seals -40°C +180°C with RUBY seals Design pressure PS: 40 bar Protection class: IP 65 (complete with electric plug) Electrical conformity: IEC 335 Switching time: 20-40 msec Also available with low lead brass for food grade The use of rigid sealings usually implies a slight leakage, limited within 2scc/min at the pressure of 1 bar. Explosion proof coil Ex nA (see Atex section) Latching coil (See coil section) Available Atex version also DRAWING REFERENCE Normally Closed RELATED ITEMS 4 P990305: Electrical plug EN 175301-803 Pg9 4 P990306: Electrical plug EN 175301-803 Pg11 4 P992126: Electrical plug EN 175301-803 Pg9 (with OR screw) 4 P992127: Electrical plug EN 175301-803 Pg11 (with OR screw) 4 P992128: Electrical plug EN 175301-803 cable 2 wires, 53cm 4 R452714: Antihumidity kit (up to IP67 protection together with plugs P992126, P992127; P992128 & H coils class) 4 P992087: Timer for automatic switch INSTALLATION 4 The solenoid valves can be mounted in any position 4 Holes and threaded connections for panel fixing 4 Other port connections available on request 4 Maintenance and instruction sheet available in each solenoid valve box 4 Availability of repair kit and coils as spares Possible to flow in any valve direcion respecting the inox pressure mantioned in the table above Figure Coil Type D mm E mm F mm