Valve 2/2 way - angle seat/process valve Normally Closed - Flow direction below the seat - pneumatically operated - Hight flow rate due to the angle seat configuration. - Anti-water hammer feature with the fluid entry below the seat. - Electrical operation is easy with the addition of a solenoid pilot. - Stainless steel body and corrosion resistant actuator. - The pneumatic actuator can be rotated through 360 degrees. - Internal seals are self adjusting for long life and better sealing. - Optical position indicator. - Internal seals are self adjusting for long life. - Universal mounting - any mounting orientation is acceptable. Automation, Heating, Water, Hot water, Steam (180°C), Aggressive and food fluids VALVE FEATURES: Fluid Temperature Ambient temperature Viscosity of the fluid Material Seal Packing gland - 10°C + 180°C - 10°C + 60°C max 600 cSt Stainless steel AISI series 316 PTFE PTFE, FKM PILOT ACTUATOR FEATURES : Fluid Temperature Body Gaskets Actuator Pipe ISO 228/1 Dry Air or lubrificated, gas and neutral fluids max + 60°C AISI 316 NBR Ø 50 Actuator pilot pressure (bar) Max. allowable Weight pressure PS (bar) 40 Note Available on request pilot S.V. 31A3AV20+BDA (see catalogue page) Together with male thread nipple male G 1/8 - G 1/8 Material compatibility with the fluids to be checked. The “ODE ” reserves the right to carry out technical and aesthetic modifications without prior notification. (Internal technical data sheet)

(Internal technical data sheet) ODE