21A Proportional series
12Pages

Proportional solenoid valve 2/2 way N.C. - Direct acting :PRESENTATION: Solenoid valve designed for a fluid output proportional to voltage change. Minimum operational pressure is not required. Mounting in any position. Material used and tests carried out ensure reliability and long life time. TECHNICAL FEATURES: Max. allowable pressure (PS) 40 bar Ambient temperature: See coils catalogue page for its compatibility. Proportional response features: Hysteresis < 5% Repeatability < 3% Sensitivity < 2% Tensions range: 0-24 VDC 24 VDC impulse range modulation (600 ÷ 800 Hz), (see general information:proportional S.V. operation). These solenoid valves are not suitable for stagnating fluids, or for fluids that being subject to evaporation may deposit solid, calcareous or similar residues. G 1/4 155°C (class F) 180°C (class H) 155°C (class F) COIL HOUSING AND COIL FORMER MATERIAL ARE MADE BY 100% VIRGIN MATERIAL. Gaskets V=FKM (fluoroelastomer) SOLENOID VALVE CALIBRATED AT 10 bar - Flow rate in air Flow rate Flow rate Water, inert gas, mineral oils (3°E), gasoline Note Also available with brass body without lead. The “ODE ” reserves the right to carry out technical and aesthetic modifications without prior notification.

MATERIALS: Body Armature tube Fixed core Plunger Spring Ring guide Orifice Seal Gasket Brass - UNI EN 12165 CW617N Stainless steel AISI series 300 Stainless steel AISI series 400 Stainless steel AISI series 400 Stainless steel AISI series 300 PTFE Brass - UNI EN 12165 CW617N V=FKM V=FKM On request: Connector Connector conformity FEATURES: Electrical conformity Protection degree IEC 335 IP 65 EN 60529 (DIN 40050) with coil fitted by connector. SPARE PART: 1. Coil: See coils list

Proportional solenoid valve 2/2 way N.C. - Direct acting :PRESENTATION: Solenoid valve designed for a fluid output proportional to voltage change. Minimum operational pressure is not required. Mounting in any position. Material used and tests carried out ensure reliability and long life time. TECHNICAL FEATURES: Max. allowable pressure (PS) 40 bar Ambient temperature: See coils catalogue page for its compatibility. Proportional response features: Hysteresis < 5% Repeatability < 3% Sensitivity < 2% Tensions range: 0-24 VDC 24 VDC impulse range modulation (600 ÷ 800 Hz), (see general...

Body Armature tube Fixed core Plunger Spring Ring guide Orifice Seal Gasket Brass - UNI EN 12165 CW617N Stainless steel AISI series 300 Stainless steel AISI series 400 Stainless steel AISI series 400 Stainless steel AISI series 300 PTFE Brass - UNI EN 12165 CW617N V=FKM V=FKM On request: Connector Connector conformity FEATURES: Electrical conformity Protection degree IEC 335 IP 65 EN 60529 (DIN 40050) with coil fitted by connector. SPARE PARTS: 1. Coil: See coils list

Proportional solenoid valve 2/2 way N.C. - Direct acting :PRESENTATION: Solenoid valve designed for a fluid output proportional to voltage change. Minimum operational pressure is not required. Mounting in any position. Material used and tests carried out ensure reliability and long life time. TECHNICAL FEATURES: Max. allowable pressure (PS) 40 bar Ambient temperature: See coils catalogue page for its compatibility. Proportional response features: Hysteresis < 5% Repeatability < 3% Sensitivity < 2% Tensions range: 0-24 VDC 24 VDC impulse range modulation (600 ÷ 800 Hz), (see general...

MATERIALS: Body Armature tube Fixed core Plunger Spring Ring guide Orifice Seal Gasket Brass - UNI EN 12165 CW617N Stainless steel AISI series 300 Stainless steel AISI series 400 Stainless steel AISI series 400 Stainless steel AISI series 300 PTFE Brass - UNI EN 12165 CW617N V=FKM V=FKM On request: Connector Connector conformity FEATURES: Electrical conformity Protection degree IEC 335 IP 65 EN 60529 (DIN 40050) with coil fitted by connector. SPARE PARTS: 1. Coil: See coils list

Proportional solenoid valve 2/2 way N.C. - Direct acting :PRESENTATION: Solenoid valve designed for a fluid output proportional to voltage change. Minimum operational pressure is not required. Mounting in any position. Material used and tests carried out ensure reliability and long life time. TECHNICAL FEATURES Max. allowable pressure (PS) 40 bar Ambient temperature: See coils catalogue page for its compatibility. Proportional response features: Hysteresis < 5% Repeatability < 3% Sensitivity < 2% Tensions range: 0-24 VDC 24 VDC impulse range modulation (600 ÷ 800 Hz), (see general...

MATERIALS: Body Armature tube Fixed core Plunger Spring Ring guide Orifice Seal Gasket Brass - UNI EN 12165 CW617N Stainless steel AISI series 300 Stainless steel AISI series 400 Stainless steel AISI series 400 Stainless steel AISI series 300 PTFE Brass - UNI EN 12165 CW617N V=FKM V=FKM On request: Connector Connector conformity FEATURES: Electrical conformity Protection degree IEC 335 IP 65 EN 60529 (DIN 40050) with coil fitted by connector. SPARE PARTS: 1. Coil: See coils list

Proportional solenoid valve Solenoid valve designed for a fluid output proportional to voltage change. Minimum operational pressure is not required. Material used and tests carried out ensure reliability and long life time. TECHNICAL FEATURES: Ambient temperature: See coils catalogue page for its compatibility. Proportional response features: 24 VDC impulse range modulation (600 - 800 Hz), (see general information:proportional S.V. operation). These solenoid valves are not suitable for stagnating fluids, or for fluids that being subject to evaporation may deposit solid, calcareous or...

MATERIALS: Body Armature tube Fixed core Plunger Spring Ring guide Orifice Seal Gasket Brass - UNI EN 12165 CW617N Stainless steel AISI series 300 Stainless steel AISI series 400 Stainless steel AISI series 400 Stainless steel AISI series 300 PTFE Brass - UNI EN 12165 CW617N V=FKM V=FKM On request: Connector Connector conformity FEATURES: Electrical conformity Protection degree IEC 335 IP 65 EN 60529 (DIN 40050) with coil fitted by connector. SPARE PARTS: 1. Coil: See coils list