[email protected] +39 0331 415221 Via 1° Maggio, 33, 20014 Nerviano (MI) Italy www.ocmer.it ORP-300 & ORP-302 REFRACTORY MASSES’ MIXING AND SPRAYING PLANT The plants OCMER type ORP/300 and ORP/302 are typically destined to the tundishes’ ordinary maintenance into the steel plants. The refractory mix normally in big bags is charged into the silo from where a electro driven guillotine gate regulate its flow into the mixing group. Here a controlled amount of water is added and then a mixing device provide to feed the vertical pumping group that bring the mix under pressure until the nozzle where compressed air is added. A min/max level electron-probe located into the pump hopper ensure the continuous feeding of the pumping group in a continuous way. The water and air pressure are monitored from two dedicated pressure switch. The nozzle man can stop and start the plant by simply close/open the compressed air valve at the nozzle. The model ORP/302 is endowed with a double SPECIALIZED TECHNICAL ADVICE We offer specialized technical consultancy on specific projects, helping you find the solution best suited to your needs. CUSTOMIZATION We actively collaborate to propose you tailor-made solutions through specially designed products or by modifying existing ones. charging silo and a double mixing devices so to can process tow different refractory mixers with one and the same plant. The mixes can be applied manually of with a robot ar

[email protected] +39 0331 415221 Via 1° Maggio, 33, 20014 Nerviano (MI) Italy www.ocmer.it TECHNICAL DATA Output: adjustable till 4 M3/h Pressure: up to 30 bars Grain Size: up to 6 mm Water Dosage: from 300 to 1600 liters/h Silo’s Capacity : 1.5 - 2 M3 (othe capacity upon request)