QI C HANGZHOU OCEAN INDUSTRY CO., LTD. Designed according to internatonal standard, high quality steel with special treatment, huge stock for all series of standard products with nice finishing, off-the-shelf sales, immediate delivery. 329 Tel: 0086-571-88842852 Fax: 0086-571-88844378 E-mail:[email protected]

QI C HANGZHOU OCEAN INDUSTRY CO., LTD. General introduction

QI C HANGZHOU OCEAN INDUSTRY CO., LTD.

HANGZHOU OCEAN INDUSTRY CO., LTD R

HANGZHOU OCEAN INDUSTRY CO., LTD. Table:2 The items in table 1 are standard products in stock. The items in table 2 will be produced against orders.

QI C HANGZHOU OCEAN INDUSTRY CO., LTD.

QI C HANGZHOU OCEAN INDUSTRY CO., LTD.

QI C HANGZHOU OCEAN INDUSTRY CO., LTD.

QI C HANGZHOU OCEAN INDUSTRY CO., LTD. Using "F" bolt on hubs to assemble E Using "H" bolt on hubs to assemble EAssembled part H capt-flange Sfetscrews 342

QI C HANGZHOU OCEAN INDUSTRY CO., LTD. F Tightening Flange Type F F 36 X 42 outside dia. in mm bore dia. in mm tightening flange type F

OIIC HANGZHOU OCEAN INDUSTRY CO., LTD. H Tightening Flange Type H H 36 X 42 outside dia. In mm bore dia. in mm tightening flange type H Tel: 0086-571-88842852 Fax: 0086-571-88844378 E-mail:[email protected]

HANGZHOU OCEAN INDUSTRY CO., LTD. Catalog internal hexagon headed bolt internal hexagon headed bolt Note: Tap hole will be in the center of the tightening flange when “ V ” =1 Tel: 0086-571-88842852 Fax: 0086-571-88844378 E-mail:[email protected] 345

QI C HANGZHOU OCEAN INDUSTRY CO., LTD. CL 200 X 260 D type D outside diameter D shaft diameter d enterprise code

HANGZHOU OCEAN INDUSTRY CO., LTD. Catalog dxD The items<CL200X260D are standard products in stock, the items>CL200X260D will be produced against orders

HANGZHOU OCEAN INDUSTRY CO., LTD.

HANGZHOU OCEAN INDUSTRY CO., LTD. Catalog dxD

HANGZHOU OCEAN INDUSTRY CO., LTD.

QI C HANGZHOU OCEAN INDUSTRY CO., LTD. CL 38 X 80 FE FE outside diameter D shaft diameter d enterprise code

HANGZHOU OCEAN INDUSTRY CO., LTD. Catalog dxD

QI C HANGZHOU OCEAN INDUSTRY CO., LTD. CL 50 X 80 FA FA outside diameter D shaft diameter d enterprise code

HANGZHOU OCEAN INDUSTRY CO., LTD. Note: All the Items listed above are for the standard parts In stock

HANGZHOU OCEAN INDUSTRY CO., LTD. Assembling diagram: Installed with through bored hub, the diameter of Inner and outer ring is the same. The inner and outer rings can move in axial direction at the same way. Please pay attention to the axial location . Inner ring FA1 LOCKS are suitable for the mechanism which has no need for axial location and its position can be adjusted Note: All the Items listed In the above table will be produced against orders

HANGZHOU OCEAN INDUSTRY CO., LTD. Note: All the Items listed above are for the standard parts In stock

HANGZHOU OCEAN INDUSTRY CO., LTD. Note: All the Items listed In the above table will be produced against orders Installed with through bored hubs, in the form of step bored. It can be positioned in axial direction, The outer ring moves in axial directiom during usage, thus inner ring and hub bore will be tightened. Positioned with hub end and then fix the position in axial direction. The outer ring moves in axial direction during usage, thus inner ring and hub bore will be tightened. Installed with non-through bored hub, and positioned with hub end. The outer ring moves in axial direction during...

QI C HANGZHOU OCEAN INDUSTRY CO., LTD. suitable for shaft diameter metrical 9 ~ <|>220(mm) FBI outside diameter D shaft diameter d enterprise code

HANGZHOU OCEAN INDUSTRY CO., LTD.

HANGZHOU OCEAN INDUSTRY CO., LTD. Catalog dxD

HANGZHOU OCEAN INDUSTRY CO., LTD. Catalog dxD

HANGZHOU OCEAN INDUSTRY CO., LTD.

Locking assembly type FAR, bores from 5 to 50mm -Simple structure -Ideal power distribution between the shaft and hub -large clamping range -Good centering ability and cyclic running -No special tools needed -No automatic locking -High transmitted torque -Shaft and hub are up to H9-H9 -Shaft and hub are without special cyclic tolerances -Easy assembly and disassembly Assembly can be done simply by inserting the locking assembly and greasing . Tighten screws alternatively and turn by 180 degrees in several stages up to the indicated torque. *Important : The locking assembly must be inserted into...

HANGZHOU OCEAN INDUSTRY CO., LTD.

QI C HANGZHOU OCEAN INDUSTRY CO., LTD. ci WZ \n)w Key elements for designing and calculation (FE.FA.FB) 1 .Determine max torque and max axial load Mmax = 30°°0H ■ K (N m) H--Transmission power KW n--rotational speed r/min K-coefficient needed Used coefficient sheet for K Sheet for coefficient used K Mmax-Required transmit torque Nm Fmax- Required transmit axial force N Mh- synthetic transmit torque Nm d-Transmission shaft diameter mm Mt~ lock rated transmitted torque Nm Mt > Mh can be used. Mt<Mh need bigger type of locks or more together

QI C HANGZHOU OCEAN INDUSTRY CO., LTD. suit for shaft diameter <|)6~<|)130mm

QI C HANGZHOU OCEAN INDUSTRY CO., LTD.

QI C HANGZHOU OCEAN INDUSTRY CO., LTD.

HANGZHOU OCEAN INDUSTRY CO., LTD.

HANGZHOU OCEAN INDUSTRY CO., LTD.

HANGZHOU OCEAN INDUSTRY CO., LTD.

QI C HANGZHOU OCEAN INDUSTRY CO., LTD. enterprise code

HANGZHOU OCEAN INDUSTRY CO., LTD.

OI C HANGZHOU OCEAN INDUSTRY CO., LTD. HLL out diameter D bore diameter d enterprise code

QI C HANGZHOU OCEAN INDUSTRY CO., LTD.

QI C HANGZHOU OCEAN INDUSTRY CO., LTD. SD out diameter D bore diameter d enterprise code

HANGZHOU OCEAN INDUSTRY CO., LTD. Max clearance between diameters S

HANGZHOU OCEAN INDUSTRY CO., LTD.

HANGZHOU OCEAN INDUSTRY CO., LTD. Max clearance between diameters S

HANGZHOU OCEAN INDUSTRY CO., LTD. Catalog dxD

QI C HANGZHOU OCEAN INDUSTRY CO., LTD. CL 50 X 60 SK SK outside diameter D in mm bore diameter d in mm enterprise code

HANGZHOU OCEAN INDUSTRY CO., LTD.