Advanced modular calibrator dpi 620 brochure
20Pages

GE Sensing & Inspection Technologies DPI 620 Series Advanced Modular Calibration and HART Communication System Combines an advanced multi-function calibrator and HART communicator with world-class pressure measurement and generation.

Modularity brings a whole new perspective to multi-function test instruments, -calibrators and HART communicators System features • Modular concept provides greater flexibility • Re-range during use • Expand over time • Adapt by application • Allows significant inventory reductions • Simplifies user training • Reduces cost of ownership • A Complete HART communicator and multifunction calibrator in one device The system includes: A combined Multifunction calibrator... • Accuracy from 0.0025%rdg + 0.002%FS • Measure, source and simulate mA, mV, V, ohms, frequency, RTDs and thermocouples •...

A flexible modular system The DPI 620 Series - Advanced Modular Calibration and HART Communication System uses three basic components to provide the multi-functionality to perform duties formerly requiring a wide range of different instruments. Features • Multi-function capabilities: electrical, frequency, temperature and pressure • Complete HART communicator included • Modular re-rangeable and expandable concept • Individual components can be used as stand-alone instruments • Allows significant inventory reductions • Simplifies training and improves operator safety • Reduces cost of ownership...

The DPI 620 Series -Advanced Modular Calibrator and HART Communicator Features • Measure, source and simulate multiple parameters • Complete HART communicator included • Easy-to-use, with photo quality colour touch screen, which can be operated by a gloved hand • Weather-proof to IP 65 • Can display up to 6 active readings • Available with a range of add-on modules, pressure measurement modules and generation stations, Intecal Field Calibration documenting module, 300Vac measurement probe • Digital interface for pressure modules and future options • USB master and slave for connecting to a...

D/A trim |4.000000 Enter meter value High performance HART communicator The DPI 620 multifunction calibrator now incorporates a fully featured HART® communicator which surpasses market leading communicators in functionality, ease of use and upgrade support such that a single hand held device can now configure the full range of HART devices and perform mA trims and sensor calibrations without the need for secondary equipment such as ammeters, calibrators, power supplies and loop resistors. This can significantly reduce equipment inventory, cost of ownership and greatly simplify maintenance...

The DPI 620 CE with WiFi Advanced Modular Calibrator and HART Communicator A wirless IEEE 802.11g enabled Multifunction Electrical Calibrator and HART Communicator The DPI 620 CE version can be further enhance with wireless IEEE 802.11g communications. For the first time, in a calibrator of this type, it is possible to link to the Internet and remote networks in order to access information and to transfer data. This powerful feature will benefit service technicians who spend extended periods away from head office and for those who need instant access to data, safety information, system...

Note 1: NLH&R (non-linearity, hysteresis and repeatability) specification applies when calibration temperature is between 10 and 30°C (50°F and 86°F). Note 2: Specification applies, 45 to 65Hz and between 10% and 100% of fullscale. Note 3: Total uncertainty includes reference standard uncertainty NLH & R and typical long term stability for one year (k=2) The display can be configured to show a maximum of 6 simultaneous reading windows as follows: CH1, CH2, P1, P2, IDOS, HART

These figures relate to DPI 620 uncertainties only. For RTD Measure and Source functions the uncertainty is given by:-Urtd = T(°C) x ppmRdg + Tos (°C) or Urtd = T(°F) x ppmRdg + Tos (°F) where T( ) is the measurement expressed in °C or °F. Measurement resolution: 0.01 °C/F. Simulation resolution 0.1 °C/F Excitation current: Measure mode 0 to 400Q 2.5mA, 400Q to 4000Q 0.5mA; Simulate mode 0 to 400 Q 5mA max, 0.4 to 2kQ 1mA max and 2 to 4kQ 0.5mA max. Simulate mode pulsed excitation current minimum duration 10 ms

6 Specifications relate to DPI 620 uncertainties only Measurement resolution 0.01 °C/F. Simulation resolution 0.1 °C/F Cold Junction (CJ) Error (maximum) Range: 10 to 30°C (50 to 86°F) = 0.2°C (0.4°F) Add 0.01°C (0.02°F) CJ Error/° ambient temperature change for ranges: -10 to 10°C, 30 to 50°C (14 to 50°F, 86 to 122°F)

PM 620 Pressure Modules Features • Fully interchangeable with no need for set-up or calibration • Simple screw fit - hand tight no tools required • Ranges from 25 mbar to 1000 bar (10 inH2O to 15000 psi) • Accuracy from 0.005% FS The PM 620 is the latest development in digital output sensor technology incorporating a number of key innovations to allow pressure re-ranging of compatible equipment. A simple screw fit makes both the pressure and electrical connections without the need for tools, sealing tape, cables or plugs and digital characterisation allows interchangeability without set-up...

The PV 621, 622 and 623 Pressure Stations Features • A uniquely capable, re-rangeable and self contained pressure test system • Advanced pressure generation - 95% vacuum to 20 bar (300 psi) pneumatic - 95% vacuum to 100 bar (1500 psi) pneumatic - 0 to 1000 bar (15000 psi) hydraulic • Stand alone replacements for hand pumps • Bench top use as comparators There are three pressure generation stations: the PV 621, a pneumatic pressure generator for pressures 95% vacuum to 20 bar (300 psi); the PV 622, a pneumatic pressure generator for pressures 95% vacuum to 100 bar (1500 psi); and the PV 623,...