Catalogs >
O/E/N India Ltd. >
Series 54 automotive relay

Series 54 automotive relay
2Pages

Catalog excerpts

O/E/l 54 HEAVY DUTY AUTOMOTIVE POWER RELAY FEATURES Limiting continuos current 70A Օ Unique twin contact Direct PCB mountable APPLICATION Օ Glow plug timers Start stop Օ Starter safely Engine cooling fan Օ Heating lments 驕 Heavy duty direction indicators TECHNICAL DATA FOR CONTACT SIDE Areas of Application Contact Configuration Contact Material Limiting Current 13.5 VDC 24VDC Electrical Life Oprations Min. Silver Nickel Alloy Silver Tin Alloy Rsistive / Inductive/capacitive Loads 1 Form A, 1 NO Silver Alloy 70A at23°C, 50A at 85°C 35A at23°C, 25A at 85°C 5 x 10"cycles @ 13.5 VDC/15A (4 Glow Plugs) 1 x 10" cycles @ 24 VDC/18A (Starter Solenoid) 100 Hrs @ 24 VDC @ 5A (Flasher load at 90cpm) 1 x 105 cycles @ 13.5 VDC/30A (Res. Load) 1 x 105 cycles @ 24 VDC/30A (Res. Load) 1 x10e <50mV ON - 300A, OFF - 70A Mechanical Life Op驩rations Min. Contact Voltage drop at 10 A (Min) Max. Switching Current @ 12VDC For 1 Sec. GENERAL DATA FOR COIL SIDE CIRCUIT DIAGRAM Nominal Coil Power Operating Power Operate Time* Release Time* 2.25W (Approx.) 1.0W (Approx.) 10 milli Seconds (Max.) 5 milli Seconds (Max.) Relays with Pre-contact *At nominal voltage without coil suppression (excluding bounce) OPERATING CONDITIONS COMi Ambient Temprature Dielectric Strength Insulation Rsistance -40°C to +85°C 500VRMS 100 Ohms Min. At 500 VDC, 25°C RH 50 COIL Vibration R驩sistance (without change in the switching state>10uS) Shock Rsistance Type of Mounting Weight 10to55Hz Min 4.4g 30g, 11mS PCB Mounting 25gms Imlin Limitai 4e We make electronics work .

Open the catalog to page 1

HOW TO ORDER COIL DATA 54 X- 1A - XXX XXX Product Sries 1 1° a ^« > 5 u > 闻_ rr E g Q oO O 1 Speclalty Contact Type N-AgNi Alloy B-AgSn Alloy 0 - Relay without extended Thick Braided wire 1 - Relay with extended Thick Braided wire 12 24 8.0 16.0 1.5 2.4 64 260 Contact Configuration ■ Nominal Coil Voltage (Refer coil data) *At 230C Ambient Tempשrature DRILLING PATTERN DIMENSIONS DIMENSIONS WITH EXTENDED BRAIDED WORE P.C. HOLE LAYOUT (COPPER SIDE) PART NUMBER PRINTING +0.1 3x02.3-0.0 +0.1 (3Nos. ' 02.10 ffn r2.85±0.15 11.0±0.15 2.75±0.15 , >S+}n -*- 13.15±0.15 WITHOUT EXTENDED BRAIDED WIRE...

Open the catalog to page 2