PRODUCT SELECTION FOR HYDRAULIC FLUIDS
6Pages

NYCO PRODUCT SELECTION FOR Design high performance hydraulic fluids with excellent environmental profile Recent trends in hydraulic systems are putting further strain on hydraulic fluids : > Smaller oil sumps increase oil exposure to heat, foam, air and water entrapment; > Increasing pump discharge pressures generate stronger wear phenomena; > Finer filter pore size requires better cleanliness and less insoluble oxidation products; > Improved energy efficiency implies better shear stability and higher VI; > Use of lower environmental impact products induces formulation restrictions; > Fire safety is a growing concern. NYCO solutions include a range of superior performance synthetic esters and formulated fluids. Inherent friction modification and anti-wear performance Excellent thermo-oxidative stability High viscosity index Low volatility High level of biodegradability and renewable carbon contents > Excellent pump protection > Increased lifetime, delivering dry TOST performance of more than 7000 h > Reduced need for shear unstable polymers > High flash and fire points, bringing improved fire safety > Suitable for the formulation of hydraulic fluids compliant with the latest environmental standards (European Ecolabel, Vessel General Permit, USDA Biopreferred...) Products references, properties & performance next pages

SYNTHETIC ESTERS REFERENCE Nycobase® 3118 Unsaturated neopolyol ester, good overall performance, moderate temperature stability, high flash point, ISO VG 46 Nycobase® 7300 Low viscosity saturated neopolyol ester, low temperatures, biodegradable Nycobase® 8103 Low viscosity saturated neopolyol ester, thermally stable, biodegradable, renewable, LuSC-list registered Nycobase® 9300 Low viscosity saturated neopolyol ester, thermally stable, biodegradable Nycobase® 8311 Low viscosity saturated neopolyol ester, added lubricity, biodegradable, renewable, ISO VG 22, LuSC-list registered Nycobase®...

Hydraunycoil® EL 4600 Unsaturated ester based, European Ecolabel certified, moderate temperatures, high flash points Hydraunycoil® FH 4400 Saturated ester based, very good overall performance Hydraunycoil® FH 4541 Hydraunycoil® FH 4551 Unsaturated ester based, fire-resistant fluids Unsaturated ester based, fire-resistant fluids, MSHA approved Hydraunycoil® FH 4700 Hydraunycoil® FH 4900 Specialtyfluids, extreme conditions, wide temperature coverage Specialtyfluids, ultra low temperature coverage

The above values are typical values. They do not constitute any contractual commitment.

ISO VG 46 - ISO 15380 - EUROPEAN ECOLABEL COMPLIANT Kinematic Viscosity, mm2/s at 100°C at 40°C at 0°C at -20°C at -20°, 7 days Pour Point, °C Flash Point, °C Acid Number, mg KOH/g Water content, mg/kg Copper corrosion 3 h - 100°C Rust prevention, deionized water Foam properties, ml Sequence I Sequence II Sequence III Air release (50°C), min Water separability (54°C), min Dry TOST, hours Baader test (72 h at 110°C) KV40 change, % FZG Load Carrying (A/8.3/90) Fail Load Stage Van Pump wear (V104C) Cam ring, mg Vanes, mg Elastomer compatibility Shore A hardness, pts NBR 1 AU HNBR FKM 2 Volume...

NYCO INDUSTRY & AUTOMOTIVE 1 Corporate headquarters 66 avenue des Champs-Elysees, BP 414, 75366 Paris Cedex 08 France Tel. : +33 1 45 61 50 00 - info@nyco.fr UNITED-STATES NYCO America LLC, a subsidiary of NYCO 87 Amlajack Way, Newnan, GA 30265, United-States Tel. : +1 877 872 6926 - info@nycoamerica.com GERMANY Deutsche NYCO GmbH, a subsidiary of NYCO Uberseering 31, 22297 Hamburg, Germany Tel. : +49 40 411 609 14 - info@deutsche-nyco.de Solutions ahead LATIN AMERICA NYCO representative office in South America Building 3845 Panama Pacifico Bd, International Business Park, Panama City,...