Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. NYCO
  3. NYCOLUBE 5500 series

NYCOLUBE 5500 series

NYCOLUBE 5500 series
1 / 3 PagesView full catalog

NYCOLUBE 5500 series

Product catalog summary
Overview: This document is a technical data sheet for the NYCOLUBE 5500 series, a range of lubricants produced by NYCO. It provides typical values for various properties of the lubricants, but notes that these values do not constitute a contractual commitment. Sales specifications are available upon request, and this document supersedes previous editions.
Product Specifications:
  • Appearance: Visual examination is consistent across all products.
  • Density at 20°C: Ranges from 0.958 to 0.969 kg/dm³, measured according to ISO 12185.
  • Flash Point (COC): Varies from 276°C to 312°C, measured according to ISO 2592.
  • Pour Point: Ranges from -42°C to -18°C, measured according to ISO 3016.
  • Kinematic Viscosity: At 100°C, it ranges from 9.1 to 22.9 mm²/s, and at 40°C, it ranges from 71 to 328 mm²/s, measured according to ISO 3104.
  • Viscosity Index: Ranges from 87 to 104, measured according to ISO 2909.
  • Evaporation (6 h at 200°C): Ranges from 0.4% to 0.7% mass, measured according to ASTM D972.
  • Acid Number (pH=11): Ranges from 0.3 to 0.4 mg KOH/g, measured according to ISO 6619.
  • Steel Corrosion: All products pass, measured according to ISO 7120A.
  • Copper Corrosion: Rated 1b for all products, measured according to ISO 2160.
  • 4 Ball Wear Scar (1 h – 392 N): Ranges from 0.38 mm to 0.50 mm, measured according to ASTM D4172.
  • 4 Ball Weld Load: Consistently 126 kg for all products, measured according to ASTM D2783.
Micro-Coking Test (GFC Lu-27-A-13):
  • 230-280°C: Deposit temperature is >280°C for most products, with NYCOLUBE 5540 at 274°C. Average merit ranges from 9.56 to 10.
  • 250-300°C: Deposit temperature is <250°C for most products, with NYCOLUBE 5520 at 259°C. Average merit ranges from 7.64 to 8.4.
Contact Information: NYCO, 66 avenue des Champs Elysées BP 414 - 75366 PARIS CEDEX 8 France. Phone: +33 145 615 000, Fax: +33 145 615 013, Email: [email protected], Website: www.nyco.fr
See more

Catalog excerpts

NYCOLUBE 5500 series-1

NYCO INDUSTRY & AUTOMOTIVE NYCOLUBE 5500 series HIGH TEMPERATURE CHAIN OILS DESCRIPTION NYCOLUBE 5500 series is a line of high temperature chain oils available in ISO VG 68, 150, 220 and 320 grades. NYCOLUBE 5500 series products are based on high performance synthetic neopolyol esters fortified with optimized anti-oxidant systems. They are specifically designed to deliver excellent performance at elevated temperatures. APPLICATIONS NYCOLUBE 5500 series is specifically recommended for high temperature chains of conveyors, furnaces and driers of industries like cement, glass, ceramics, plastic, fibre board, plastic film, insulating material production, as well as metal forming. NYCOLUBE 5500 series may be used on equipment operating at temperatures of up to 280°C (peak temperature). NYCOLUBE 5500 series combines: ■ Excellent high temperature and lubricity performance: very low volatility, good resistance to thermo-oxidation and low deposit formation Improved safety thanks to its unusually high flash points X Excellent cleanliness X Durability thanks to low volatility and thermo-oxidation resistance X Good lubricity X Reduced fire outbreaks NYCO 66 avenue des Champs Elysees BP 414 - 75366 PARIS CEDEX 8 France | Tel. : +33 145 615 000 | Fax : +33 145 615 013 | E.mail : [email protected] | www.nyco.fr

 Open the catalog to page 1
NYCOLUBE 5500 series-2

NYCOLUBE 5500 series Properties Unit Typical Result Test method NYCOLUBE NYCOLUBE NYCOLUBE 5520 5540 5550 Flash point COC Pour point Kinematic viscosity at 100° at 40°C Viscosity Index Evaporation 6 h at 200°C Acid number (pH=11) Steel corrosion Copper corrosion 4 ball Wear Scar 1 h — 392 N 4 ball Weld Load (1) Clear, bright and free from water and undissolved impurities Colour may change from yellow to slightly red with sunlight with no impact on product performance

 Open the catalog to page 2
NYCOLUBE 5500 series-3

NYCOLUBE 5520 NYCOLUBE 5540 NYCOLUBE 5550 NYCOLUBE 5560 GFC Lu-27-A-13, Micro-Coking Test, 230-280°C Deposit temperature Average merit GFC Lu-27-A-13, Micro-Coking Test, 250-300°C Deposit temperature Average merit The values above are typical values. They do not constitute any contractual commitment. Sales specifications are available on request. The present technical data sheet replaces all the previous editions. NYCO 66 avenue des Champs Elysées BP 414 - 75366 PARIS CEDEX 8 France | Tél. : +33 145 615 000 | Fax : +33 145 615 013 | E.mail : [email protected] | www.nyco.f

 Open the catalog to page 3

All NYCO catalogs and technical brochures

  1. HYDRAUNYCOIL FH 13
    HYDRAUNYCOIL FH 13

    1  Page

  2. PRODUCT SELECTION FOR HYDRAULIC FLUIDS
    PRODUCT SELECTION FOR HYDRAULIC FLUIDS

    6  Pages

  3. HYDRAUNYCOIL FH 2
    HYDRAUNYCOIL FH 2

    2  Pages

  4. HYDRAUNYCOIL FH 42
    HYDRAUNYCOIL FH 42

    2  Pages

  5. HYDRAUNYCOIL FH 19
    HYDRAUNYCOIL FH 19

    1  Page

  6. HYDRAUNYCOIL FH 14
    HYDRAUNYCOIL FH 14

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.