video corpo

KMZ41 Magnetic field sensor
10Pages

{{requestButtons}}

Catalog excerpts

KMZ41 Magnetic field sensor - 1

KMZ41 Magnetic field sensor Rev. 6 — 18 November 2010 Product data sheet 1. Product profile 1.1 General description The KMZ41 is a sensitive magnetic field sensor, employing the magneto-resistive effect of thin film permalloy. The sensor contains two galvanically separated Wheatstone bridges, which enclose an angle of 45 degrees. A rotating magnetic field strength > 40 kA/m (recommended field strength > 100 kA/m) in the surface parallel to the chip (x-y plane) will deliver two independent sinusoidal output signals, one following a cos(2α) and the second following a sin(2α) function. The sensor can be operated at any frequency between DC and 1 MHz. 1.2 Features and benefits Accurate and reliable angle measurement Mechanical robustness, contactless principle Wear-free operation Accuracy independent of mechanical tolerances Extended temperature range 1.3 Quick reference data Table 1. Quick reference data Tamb = 25 °C and Hext = 100 kA/m, VCC = 5 V unless otherwise specified. Symbol Vpeak Min Typ Max Unit supply voltage VCC Parameter [1] - 5 9 V peak voltage see Figure 2 [1] 73 81 89 mV per supply voltage; see Figure 2 [1] −2 - +2 mV/V 2.0 2.5 3.0 kΩ Voffset offset voltage Rbridge bridge resistance Conditions [1][2] [1] Applicable for bridge 1 and bridge 2. [2] Bridge resistance between pin 4 and pin 8, pin 3 and pin 7, pin 5 and pin 1, pin 6 and pin 2.

Open the catalog to page 1
KMZ41 Magnetic field sensor - 2

KMZ41 NXP Semiconductors Magnetic field sensor 2. Pinning information Table 2. Pinning Pin Symbol Description Simplified outline 1 ON1 output voltage bridge 1 2 ON2 output voltage bridge 2 3 VCC2 supply voltage bridge 2 4 VCC1 supply voltage bridge 1 5 OP1 output voltage bridge 1 6 OP2 output voltage bridge 2 7 GND2 supply voltage bridge 2 8 GND1 supply voltage bridge 1 8 5 x y 1 4 mgd790 3. Ordering information Table 3. Ordering information Type number Package Name KMZ41 Description Version SO8 plastic small outline package; 8 leads; body width 3.9 mm SOT96-1 4. Circuit diagram KMZ41...

Open the catalog to page 2
KMZ41 Magnetic field sensor - 3

KMZ41 NXP Semiconductors Magnetic field sensor 5. Limiting values Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter Conditions Min [1] Max Unit - 9 V VCC supply voltage Hext external magnetic field strength 40 - kA/m Tamb ambient temperature −40 +150 °C Tstg storage temperature −65 +150 °C [1] Applicable for bridge 1 and bridge 2. 6. Thermal characteristics Table 5. Thermal characteristics Symbol KMZ41 Product data sheet Parameter Rth(j-a) thermal resistance from junction to ambient Conditions All information provided in this...

Open the catalog to page 3
KMZ41 Magnetic field sensor - 4

KMZ41 NXP Semiconductors Magnetic field sensor 7. Characteristics Table 6. Characteristics Tamb = 25 °C and Hext = 100 kA/m, VCC = 5 V unless otherwise specified. Symbol Min Typ Max Unit supply voltage [1] - 5 9 V Vpeak peak voltage [1] 73 81 89 mV TCVpeak temperature coefficient of peak Tamb = −40 °C to +150 °C voltage [1][2] −0.38 −0.41 −0.44 %/K Rbridge bridge resistance [1][3] 2.0 2.5 3.0 kΩ [1][4] 0.31 0.33 0.35 %/K [1] −2 - +2 mV/V VCC Parameter Conditions see Figure 2 TCRbridge temperature coefficient of bridge resistance Tamb = −40 °C to +150 °C Voffset offset voltage per supply...

Open the catalog to page 4
KMZ41 Magnetic field sensor - 5

KMZ41 NXP Semiconductors Magnetic field sensor VO (mV) α = 0° VO2 direction of magnetic field α Vpeak2 ON1 GND1 ON2 Voffset2 GND2 0 VCC2 OP2 VCC1 OP1 VO1 mgu175 0 Fig 2. 90 270 180 α (deg) 360 Output signals related to the direction of the magnetic field 006aaa530 VO (mV) FH2 FH1 VO1 0 0 Fig 3. KMZ41 Product data sheet 45 VO2 90 α (deg) 135 Definition of hysteresis All information provided in this document is subject to legal disclaimers. Rev. 6 — 18 November 2010 © NXP B.V. 2010. All rights reserved. 5 of 10

Open the catalog to page 5
KMZ41 Magnetic field sensor - 6

1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included. 2. Plastic or metal protrusions of 0.25 mm (0.01 inch) maximum per side are not included.

Open the catalog to page 6
KMZ41 Magnetic field sensor - 7

KMZ41 NXP Semiconductors Magnetic field sensor 9. Packing information Table 7. Packing methods The indicated -xxx are the last three digits of the 12NC ordering code.[1] Type number Package Description Packing quantity 2500 KMZ41 [1] SOT96-1 8 mm pitch, 12 mm tape and reel -118 12NC ordering code: 9340 372 10118. For further information and the availability of packing methods, see Section 12. 10. Revision history Table 8. Revision history Document ID Release date Data sheet status Change notice Supersedes KMZ41 v.6 20101118 Product data sheet CPCN201007013F KMZ41_5 KMZ41_5 20061127 Product...

Open the catalog to page 7
KMZ41 Magnetic field sensor - 8

KMZ41 NXP Semiconductors Magnetic field sensor 11. Legal information 11.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is...

Open the catalog to page 8
KMZ41 Magnetic field sensor - 9

KMZ41 NXP Semiconductors Magnetic field sensor Export control — This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from national authorities. Quick reference data — The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. 11.4 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 12....

Open the catalog to page 9
KMZ41 Magnetic field sensor - 10

KMZ41 NXP Semiconductors Magnetic field sensor 13. Contents 1 1.1 1.2 1.3 2 3 4 5 6 7 8 9 10 11 11.1 11.2 11.3 11.4 12 13 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1 General description . . . . . . . . . . . . . . . . . . . . . 1 Features and benefits . . . . . . . . . . . . . . . . . . . . 1 Quick reference data . . . . . . . . . . . . . . . . . . . . 1 Pinning information . . . . . . . . . . . . . . . . . . . . . . 2 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Circuit diagram . . . . . . . . . . . . . . . . . . . . . . . . . 2 Limiting...

Open the catalog to page 10

All NXP Semiconductors catalogs and technical brochures

  1. TEF668X

    8 Pages

  2. TDA8034HN

    32 Pages

  3. MSC8256

    70 Pages

  4. SAC57D54H

    77 Pages

  5. OL2385

    85 Pages

  6. MAC57D5xx

    2 Pages