Dual 4-input multiplexer 74HC_HCT153_Q10...
15Pages

Product data sheet 1. General description The 74HC153-Q100; 74HCT153-Q100 is a dual 4-input multiplexer. The device features independent enable inputs (nE) and common data select inputs (S0 and S1). For each multiplexer, the select inputs select one of the four binary inputs and routes it to the multiplexer output (nY). A HIGH on E forces the corresponding multiplexer outputs LOW. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications. 2. Features and benefits Automotive product qualification in accordance with AEC-Q100 (Grade 1) Specified from 40 C to +85 C and from 40 C to +125 C Input levels: For 74HC153-Q100: CMOS level For 74HCT153-Q100: TTL level Non-inverting outputs Separate enable input for each output Common select inputs Complies with JEDEC standard no. 7A Permits multiplexing from n lines to 1 line Enable line provided for cascading (n lines to 1 line) ESD protection: MIL-STD-883, method 3015 exceeds 2000 V HBM JESD22-A114F exceeds 2000 V MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 ) Multiple package options

3. Ordering information Table 1. Ordering information Type number Package Temperature range plastic small outline package; 14 leads; body width SOT108-1 3.9 mm plastic thin shrink small outline package; 14 leads; SOT402-1 body width 4.4 mm Logic symbol Product data sheet Functional diagram All information provided in this document is subject to legal disclaimers.

Logic diagram 5. Pinning information 5.1 Pinning Product data sheet All information provided in this document is subject to legal disclaimers.

output enable inputs (active LOW) data select inputs data inputs source 1 multiplexer output source 1 multiplexer output source 2 data inputs source 2 supply voltage 6. Functional description Table 3. Function table H = HIGH voltage level; L = LOW voltage level; X = don’t care. select Inputs data inputs output enable 7. Limiting values Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V). Symbol supply voltage input clamping current output clamping current output current supply current ground current...

Table 4. Limiting values …continued In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V). Symbol total power dissipation The input and output voltage ratings may be exceeded if the input and output current ratings are observed. For SO16 package: Ptot derates linearly with 8 mW/K above 70 C. For TSSOP16 packages: Ptot derates linearly with 5.5 mW/K above 60 C. 8. Recommended operating conditions Table 5. Recommended operating conditions Voltages are referenced to GND (ground = 0 V) Symbol Parameter supply voltage input voltage...

Table 6. Static characteristics …continued At recommended operating conditions; voltages are referenced to GND (ground = 0 V). Symbol Parameter LOW-level output voltage input leakage current supply current input capacitance HIGH-level input voltage LOW-level input voltage HIGH-level output voltage LOW-level output voltage input leakage current supply current additional supply current per input pin; VI = VCC 2.1 V; IO = 0 A; other inputs at VCC or GND; VCC = 4.5 V to 5.5 V - input capacitance Product data sheet All information provided in this document is subject to legal disclaimers.

10. Dynamic characteristics Table 7. Dynamic characteristics GND = 0 V; tr = tf = 6 ns; CL = 50 pF; for test circuit, see Figure 8; unless otherwise specified Symbol Parameter propagation delay power dissipation capacitance transition time HIGH to LOW propagation delay LOW to HIGH propagation delay Product data sheet All information provided in this document is subject to legal disclaimers.

Table 7. Dynamic characteristics …continued GND = 0 V; tr = tf = 6 ns; CL = 50 pF; for test circuit, see Figure 8; unless otherwise specified Symbol Parameter propagation delay transition time power dissipation capacitance tpd is the same as tPHL and tPLH. tt is the same as tTHL and tTLH. CPD is used to determine the dynamic power dissipation (PD in W): PD = CPD VCC2 fi N + (CL VCC2 fo) where: fi = input frequency in MHz; fo = output frequency in MHz; CL = output load capacitance in pF; VCC = supply voltage in V; N = number of inputs switching; (CL VCC2 fo) = sum of outputs. (1) Measurement...

(1) Measurement points are given in Table 8. VOL and VOH are typical voltage output levels that occur with the output load. Waveforms showing the input (Sn, nE) to output (nY) propagation delays Test data is given in Table 9. Definitions test circuit: RT = termination resistance should be equal to output impedance Zo of the pulse generator. CL = load capacitance including jig and probe capacitance. Test circuit for measuring switching times Test data tPLH, tPHL tPLH, tPHL Product data sheet All information provided in this document is subject to legal disclaimers.

11. Package outline SO14: plastic small outline package; 14 leads; body width 3.9 mm scale DIMENSIONS (inch dimensions are derived from the original mm dimensions) UNIT Note 1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included. REFERENCES OUTLINE VERSION EUROPEAN PROJECTION Product data sheet All information provided in this document is subject to legal disclaimers.

TSSOP14: plastic thin shrink small outline package; 14 leads; body width 4.4 mm scale DIMENSIONS (mm are the original dimensions) UNIT Notes 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. Plastic interlead protrusions of 0.25 mm maximum per side are not included. OUTLINE VERSION SOT402-1 EUROPEAN PROJECTION Product data sheet All information provided in this document is subject to legal disclaimers.

Device Under Test ElectroStatic Discharge Human Body Model Machine Model 13. Revision history Table 11. Revision history Release date Data sheet status Change notice Product data sheet Product data sheet Figure 4 removed from the data sheet. Product data sheet All information provided in this document is subject to legal disclaimers.