video corpo

74AHC(T)1G66 Single-pole single-throw analog switc
17Pages

{{requestButtons}}

Catalog excerpts

74AHC(T)1G66 Single-pole single-throw analog switc - 1

74AHC1G66; 74AHCT1G66 Single-pole single-throw analog switch Rev. 04 — 18 December 2008 Product data sheet 1. General description 74AHC1G66 and 74AHCT1G66 are high-speed Si-gate CMOS devices. They are single-pole single-throw analog switches. The switch has two input/output pins (Y and Z) and an active HIGH enable input pin (E). When pin E is LOW, the analog switch is turned off. 2. Features I Very low ON resistance: N 26 Ω (typ.) at VCC = 3.0 V N 16 Ω (typ.) at VCC = 4.5 V N 14 Ω (typ.) at VCC = 5.5 V I High noise immunity I Low power dissipation I Balanced propagation delays I Multiple package options I ESD protection: N HMB JESD22-A114E exceeds 2000 V N MM JESD22-A115-A exceeds 200 V N CDM JESD22-C101C exceeds 1000 V I Specied from −40 °C to +85 °C and −40 °C to +125 °C 3. Ordering information Table 1. Ordering information Type number Package Temperature range 74AHC1G66GW Name Description Version −40 °C to +125 °C TSSOP5 plastic thin shrink small outline package; 5 leads; body width 1.25 mm SOT353-1 −40 °C to +125 °C SC-74A plastic surface-mounted package; 5 leads SOT753 74AHCT1G66GW 74AHC1G66GV 74AHCT1G66GV

Open the catalog to page 1
74AHC(T)1G66 Single-pole single-throw analog switc - 2

74AHC1G66; 74AHCT1G66 NXP Semiconductors Single-pole single-throw analog switch 4. Marking Table 2. Marking codes Type number Marking 74AHC1G66GW AL 74AHCT1G66GW CL 74AHC1G66GV A66 74AHCT1G66GV C66 5. Functional diagram Z E Y E Z Y VCC 001aag487 Fig 1. Logic symbol mna628 Fig 2. Logic diagram 6. Pinning information 6.1 Pinning 74AHC1G66 74AHCT1G66 Y 1 Z 2 GND 5 3 VCC 4 E 001aai834 Fig 3. Pin conguration SOT353-1 and SOT753 74AHC_AHCT1G66_4 Product data sheet © NXP B.V. 2008. All rights reserved. Rev. 04 — 18 December 2008 2 of 17

Open the catalog to page 2
74AHC(T)1G66 Single-pole single-throw analog switc - 3

74AHC1G66; 74AHCT1G66 NXP Semiconductors Single-pole single-throw analog switch 6.2 Pin description Table 3. Pin description Symbol Pin Description Y 1 independent input or output Z 2 independent input or output GND 3 ground (0 V) E 4 enable input (active HIGH) VCC 5 supply voltage 7. Functional description Table 4. Function table[1] Input E Switch L OFF H ON [1] H = HIGH voltage level; L = LOW voltage level. 8. Limiting values Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V). Symbol Parameter VCC...

Open the catalog to page 3
74AHC(T)1G66 Single-pole single-throw analog switc - 4

74AHC1G66; 74AHCT1G66 NXP Semiconductors Single-pole single-throw analog switch Table 6. Recommended operating conditions …continued Voltages are referenced to GND (ground = 0 V).[1] Symbol Parameter Conditions 74AHC1G66 74AHCT1G66 Unit Min Typ Max Min Typ Max −40 +25 +125 −40 Tamb ∆t/∆V input transition rise and VCC = 3.3 ± 0.3 V fall rate VCC = 5.0 ± 0.5 V +25 +125 [2] - - 100 - - - ns/V [2] - - 20 - - 20 ns/V ambient temperature °C [1] To avoid drawing VCC current out of pin Z, when switch current ows in pin Y, the voltage drop across the bidirectional switch must not exceed 0.4 V. If...

Open the catalog to page 4
74AHC(T)1G66 Single-pole single-throw analog switc - 5

74AHC1G66; 74AHCT1G66 NXP Semiconductors Single-pole single-throw analog switch Table 7. Static characteristics …continued Voltages are referenced to GND (ground = 0 V). Symbol Parameter 25 °C Conditions −40 °C to +85 °C −40 °C to +125 °C Unit Min Typ Max Min Max Min Max IS(OFF) OFF-state leakage current Y or Z; VCC = 5.5 V; see Figure 4 - - 0.1 - 1.0 - 4.0 µA IS(ON) ON-state leakage current Y or Z; VCC = 5.5 V; see Figure 5 - - 0.1 - 1.0 - 4.0 µA ICC supply current E, Y or Z = VCC or GND; VCC = 5.5 V - - 1.0 - 10 - 40 µA ∆ICC additional per input pin; VI = 3.4 V; supply current other...

Open the catalog to page 5
74AHC(T)1G66 Single-pole single-throw analog switc - 6

74AHC1G66; 74AHCT1G66 NXP Semiconductors Single-pole single-throw analog switch 10.2 ON resistance Table 8. ON resistance At recommended operating conditions; voltages are referenced to GND (ground 0 V); for graph see Figure 7 [1]. Symbol Parameter 25 °C Conditions −40 °C to +85 °C −40 °C to +125 °C Unit Typ max Max Max 148[1] - - - Ω ISW = 10 mA; VCC = 3.0 V to 3.6 V 28 50 70 110 Ω ISW = 10 mA; VCC = 4.5 V to 5.5 V 15 30 40 60 Ω ISW = 1.0 mA; VCC = 2.0 V 30 - - - Ω ISW = 10 mA; VCC = 3.0 V to 3.6 V 20 50 65 90 Ω ISW = 10 mA; VCC = 4.5 V to 5.5 V 15 22 26 40 Ω ISW = 1.0 mA; VCC = 2.0 V 28 -...

Open the catalog to page 6
74AHC(T)1G66 Single-pole single-throw analog switc - 7

74AHC1G66; 74AHCT1G66 NXP Semiconductors Single-pole single-throw analog switch 11. Dynamic characteristics Table 9. Dynamic characteristics Voltages are referenced to GND (ground = 0 V); CL = 50 pF; unless otherwise specied; For test circuit see Figure 10. Symbol Parameter 25 °C Conditions −40 °C to +85 °C −40 °C to +125 °C Unit Typ[1] max Max Max VCC = 2.0 V 2.2 5.0 6.0 7.0 ns VCC = 3.0 V to 3.6 V 1.0 2.0 3.0 4.0 ns 0.6 1.0 2.0 3.0 ns VCC = 2.0 V; CL = 15 pF 7.0 25.0 33.0 40.0 ns VCC = 2.0 V 11.0 35.0 46.0 57.0 ns VCC = 3.0 V to 3.6 V; CL = 15 pF 4.0 11.0 14.0 18.0 ns VCC = 3.0 V to 3.6 V...

Open the catalog to page 7
74AHC(T)1G66 Single-pole single-throw analog switc - 8

74AHC1G66; 74AHCT1G66 NXP Semiconductors Single-pole single-throw analog switch Table 9. Dynamic characteristics …continued Voltages are referenced to GND (ground = 0 V); CL = 50 pF; unless otherwise specied; For test circuit see Figure 10. Symbol Parameter 25 °C Conditions −40 °C to +85 °C −40 °C to +125 °C Unit Typ[1] CPD power dissipation capacitance max Max Max 15 - - - [3] VI = GND to VCC [1] All typical values are measured at VCC = 2.0 V, VCC = 3.3 V, VCC = 5.0 V and Tamb = 25 °C. [2] tpd is the same as tPLH and tPHL. ten is the same as tPZL and tPZH. tdis is the same as tPLZ and...

Open the catalog to page 8
74AHC(T)1G66 Single-pole single-throw analog switc - 9

74AHC1G66; 74AHCT1G66 NXP Semiconductors Single-pole single-throw analog switch VI E VM GND t PZL t PLZ VCC Y or Z output LOW-to-OFF OFF-to-LOW VM VX VOL t PZH t PHZ Y or Z output HIGH-to-OFF OFF-to-HIGH VOH VY VM GND switch enabled switch disabled switch enabled mna668 Measurement points are given in Table 10. Logic levels: VOL and VOH are typical output voltage levels that occur with the output load. Fig 9. Table 10. Enable and disable times Measurement points Type Input Output VM VM VX VY 74AHC1G66 0.5VCC 0.5VCC VOL + 0.3 V VOH − 0.3 V 74AHCT1G66 1.5 V 1.5 V VOL + 0.3 V VOH − 0.3 V...

Open the catalog to page 9

All NXP Semiconductors catalogs and technical brochures

  1. TEF668X

    8 Pages

  2. TDA8034HN

    32 Pages

  3. MSC8256

    70 Pages

  4. SAC57D54H

    77 Pages

  5. OL2385

    85 Pages

  6. MAC57D5xx

    2 Pages