A30S4E Free-Stand Single and Dual Access enclosure The latest Hoffman-branded enclosure from Pentair has been specially designed for heavy duty applications – housing systems with large components or complex mounting configurations – in harsh environments. Three-point latching and sealing provide industry-leading protection from dust, dirt, oil and water. The enclosure is for housing motor starters, drives, contactors and PLCs, as well as a wide variety of other electrical and electronic equipment. It is used extensively in oil and gas, pulp and paper, chemical, food and beverage, pharmaceutical, textile and similar industries. The new design with double access is ideally suited for the mounting of physically large, heavy duty devices where tight sealing (IP) and rigidity (IK) is important. INDUSTRY STANDARDS • Thickness 2.5mm, stainless steel type AISI 304 (EN 1.4301) or 316L (1.4404) IEC EN 50102, IK10 IEC EN 62208; UL 508A Listed; Type 4, 4X, 12 File No. E61997 NEMA Type 4, 4X, 12 • External surface body and door brushed finish grain 240, Ra≤0,8µm, smooth internal surface (2B) • Heavy-duty three-point latching mechanism operated by Type 316L stainless steel POWERGLIDE® padlocking handle • Seams continuously welded and ground smooth • Body grounding, studs door and body • Two-door enclosures are provided with a removable centerpost for easy mounting plate installation • Bottom gland plates, 3.0mm removable from inside, with grounding stud • Seamless foam-in-place polyurethane gasket assures a water-tight and dust-tight seal • High-impact thermoplastic data pocket provided with each enclosure • Base plinth 100mm included, with front and rear removable cover for easy cable entry • Door opening angle 100˚ Design with CONFIDENCE EQUIPMENT PROTECTION SOLUTIONS FREE-STAND SINGLE AND DUAL ACCESS ENCLOSURE

A30S4E Free-Stand Single and Dual Access enclosure STANDARD PRODUCT; SINGLE ACCESS *D – double doors with centerpost LIGHT CHANNEL CENTER SUPPORT (only for double door) MOUNTING CHANNEL DOOR GROUNDING STUD BODY GROUNDING STUD DOOR GROUNDING STUD BODY GROUNDING STUD GROUNDING STUD BODY DOOR GROUNDING STUD GROUNDING MOUNTING CHANNEL GLAND PLATE GROUNDING BODY STUD GROUNDING STUD REMOVABLE CENTERPOST EQUIPMENT PROTECTION SOLUTIONS LIGHT CHANNEL LIGHT CHANNEL MOUNTING CHANNEL FULL PANEL FREE-STAND SINGLE AND DUAL ACCESS ENCLOSURE GLAND PLATE GROUNDING GLAND PLATE STUD GROUNDING STUD

A30S4E FrEE-StAnd SinglE And duAl AccESS EncloSurE *D – double doors with centerpost A LIGHT CHANNEL CENTER SUPPORT (only for double door) MOUNTING CHANNEL LIGHT CHANNEL BODY GROUNDING STUD DOOR GROUNDING STUD BODY GROUNDING STUD DOOR GROUNDING STUD 63,9 DOOR GROUNDING STUD MOUNTING CHANNEL FULL PANEL GLAND PLATE GROUNDING BODY STUD Usable space: A - 88,9 B - 88,9 GLAND PLATE GROUNDING STUD GROUNDING STUD REMOVABLE CENTERPOST MODIFICATION - DESIGN YOUR STANDARD OPTIONS Window kits AWDH3024N4SS AWDH2016N4SS APWK2919NFSS APWK711NFSS *UL 508A Listed Studs, nuts Sunshield tops NEMA 4X, IP66 Deep...

A30S4E FrEE-StAnd SinglE And duAl AccESS EncloSurE AccESSoriES And PAnElS ACCESSORIES Part number ALGDSTOP2E Description ALGDSTOP2E door stop for large enclosures PLEM20SS kit with four lifting eyes 304 PLEM20SS6 kit with four lifting eyes 316L LEDA1S35 LED light, AC Switch*, screw LEDA2S35 LED light, AC Motion **, screw LEDD1S35 LED light, AC Switch*, screw LEDD2S35 LED light, AC Motion**, screw Operating voltage *Switch activation by on/off door switch **Motion activation by IR motion sensor Description A20P6F1GE Full mounting plate A20P8F1GE Full mounting plate A20P10F1GE Full mounting plate...