epcaseWMain Catalogue Wall mounted cases – W Wall mounted cases . . . . . . . . 2 Accessories for cabinets and wall mounted cases 3 Front panels, plug-in units . . 7 Hinged side panels for easy access Optimum space utilisation due to an additional vertical 19" plane; fans retrofittable Systems . . . . . . 8 Standards ࡯ Type of protection IP 20 IEC 60529 Power supply units . . . . . . . . . 9 Connectors, front panel component system . . . . . . 11 Simple design and assembly: mounting, wiring, cladding Downloads and further important information can be found on the Internet under www.schroff.biz

Wall mounted cases – W epcaseWMain Catalogue Low-cost wall mounted case ࡯ Hinged side panels for easy access ࡯ Completely pre-assembled ࡯ Optimum space utilisation through depth-adjustable 19" slide mounts and an additional vertical 19" plane ࡯ Type of protection IP 20 epcase 19" 19" wall mounted case . . . . . 2.26 Fan . . . . . . . . . . Protective grille . 2.27 Air filter . . . . . . . 2.28 Lever handle . . . 2.28 19" equipment shelf . . . . . . . . . Modem shelf . . . 2.30 Vertical 19" plane . . . . . . . 2.30 Cable eye . . . . . 2.31 Cable support rail . . . . . . . . . . . 2.31 Short slide...

Wall mounted cases – W 19" wall mounted case epcaseWMain CataloguePart number in bold face type: ready for despatch within 2 working daysPart number in normal type: ready for despatch within 10 working days ࡯ Multi functional 19" wall case with hinged side panels ࡯ Cable entry possible from above or below; the cable entry opening can be sealed with two brush strips each, resp. can be used to assemble fan ࡯ Cable support rail is included and is adjustable in 25 mm increments ࡯ 19" panel/slide mounts are depth-adjustable in 25 mm increments ࡯ Type of protection IP 20 Delivery comprises (assembled)...

Wall mounted cases – W Fan with covering grille, 230 VAC epcaseW ࡯ For assembly in cable ducting openings (top/bottom) ࡯ Assembly of fan by clipping in protective grilles ࡯ Connect up to 3 fans via separate connecting cable Delivery comprises Item 1 2 Description 230 VAC fan, dimensions 38 x 119 x 119 mm Protective grille, plastic, black Order Information Description Fan with covering grille, 230 VAC Connecting cable for 1 ... 3 fans IEC-320 male connector, 1 piece Thermostat with mains/line connector, 230 VAC, SCHUKO/UTE connector, IEC-320 female connector, 1 piece Technical data Frequency Voltage...

Wall mounted cases – W Air filter for 19" wall mounted case epcaseW ࡯ Filtering of the inlet air at the case bottom ࡯ Assembly beneath the case, easy filter replacement ࡯ Filter class G3 Delivery comprises Item 1 2 3 Description Support bracket, St, 1 mm, RAL 7021 Filter mat with round steel frame, filter class G3 Assembly kit Order Information Description Air filter for case depth 300/400 mm Air filter for case depth 500/600 mm Replacement filter mat for case depth 300/400 mm, PU 3 pieces Replacement filter mat for case depth 500/600 mm, PU 3 pieces For further information www.schroff.biz/oneclick...

Wall mounted cases – W 19" equipment shelf, 1 U epcaseW ࡯ Static load-carrying capacity 5 kg ࡯ Mounting height 1 U Delivery comprises Item 1 Description Equipment shelf, St, 1.5 mm Order Information Width Depth mm mm 447 390 19" assembly kit (screw, washer, nut) (4 x M6 screws x 16, 4 x plastic washers, 4 x cage nuts) 19" equipment shelf, 2 U epcaseW ࡯ Static load-carrying capacity 10 kg ࡯ Mounting height 2 U Delivery comprises Item 1 Description Equipment shelf, St, 1.5 mm Order Information Width Depth mm mm 447 238 19" assembly kit (screw, washer, nut) (4 x M6 screws x 16, 4 x plastic washers,...

Wall mounted cases – W Modem shelf epcaseW ࡯ For fixing modems and other devices ࡯ Assembly onto the cable support rail or direct onto the case ࡯ Static load-carrying capacity 3 kg Delivery comprises Item 1 2 Description Modem shelf, St, 1.5 mm, RAL 7035 Assembly kit Order Information Width mm 200 Vertical 19" plane epcaseW ࡯ For lateral, vertical assembly of 19" components ࡯ Useable for case heights from 12 U Delivery comprises (kit) Item 1 2 3 Description Vertical 19" plane, St, 2 mm, RAL 7035 Cable support rail, St, RAL 7035 Assembly kit Order Information Height U 3 6 For further information...

Wall mounted cases – W Cable eye epcaseW ࡯ For cable fixing/ducting laterally on the panel slide mounts Delivery comprises Item 1 2 Description Cable eye, St, 4 mm, zinc-plated Assembly kit Cable support rail epcaseW ࡯ For strain relief or cable ducting on rear ࡯ Height-adjustable in 25 mm increments Delivery comprises Item 1 2 Description Cable support rail, St, 1.5 mm, RAL 7035 Assembly kit Order Information Description Cable support rail Cable shell for cable bundle 30 ... 34 mm, PU 10 pieces Cable tie 92 mm x 2.5 mm, PU 25 pieces Velcro strip Polyethylen/Polyamide, black, length 300 mm, PU...

Wall mounted cases – W 10" wall mounted case epcaseW ࡯ Multi-functional 10" wall case with hinged side panels ࡯ Cable entry possible from above or below; the cable entry opening can be sealed with a brush strip ࡯ 10" slide mounts are depth-adjustable in 25 mm increments Delivery comprises (assembled) Item 1 2 Description Basic case, C-form, St, 2 mm, RAL 7021 Glazed door with key lock (key no. 2233), frame, St, 1.5 mm, RAL 7035, Sekurit glass, 4 mm Side panel, St, 1,5 mm, RAL 7035 10" panel/slide mounts, St, 1.5 mm, finish AlZn Brush strips Assembly kit for wall mounting Order Information Height...

Wall mounted cases – W Air filter for 10" wall mounted case epcaseW ࡯ Filtering of the inlet air at the case bottom ࡯ Assembly beneath the case, easy filter replacement ࡯ Filter class G3 Delivery comprises Item 1 2 3 Description Support bracket, St, 1 mm, RAL 7021 Filter mat with round steel frame, filter class G3 Assembly kit Order Information Description Air filter for 10" wall mounted case Replacement filter mat for 10" wall mounted case PU 3 pieces For further information www.schroff.biz/oneclick oneClick search code = Part no. 01506050 Equipment shelf for 10" wall mounted case epcaseW ࡯...