nvfentl HOFFMAN IEC Modular Replacement and Spare Parts Catalog North America

Your benefits: • Comprehensive range of industry-leading solutions • 16,000+ standard products with large in-stock selection • Full certification • Convenient customization services • Local inventories for faster shipping nVent is dedicated to delivering the most comprehensive range of superior quality, cost-effective products to customers. As part of that commitment, we support you every step of the way, from the simplest to the most complex solutions. We also provide detailed guidance and quotations, so you understand the purpose and cost of the whole solution, including each component. Assembly...

Modular Enclosures

Modular Enclosures Mild steel Single door enclosure, combinable version | MCS

Modular Enclosures Mild steel Double door enclosure, combinable version | MCD CCR CBPK CBP SPMKIT LSEL DPSL

Modular Enclosures Mild steel IP protected ICT rack | MCI

Modular Enclosures Replacement parts

Description: Standard door equipped with double-bit 3 mm lock system and door frame. Door accessory kit DNMK (hinges, rod catches) to be ordered separately. Allows all the options of the locking program and 180° hinges.Material: 2 mm steel plate.Finish: RAL 7035 structured powder coating.Pack quantity: 1 piece.Maximum load: 800 N.Mounting requirement: Use hinge kit DNMK01 (single door) or DNMK02 (double door) if no door was fitted previously.

Description: Complete espagnolette system for single and double door floor standing enclosures. Pack quantity: Complete set for one door.

Description: Gives the door extra rigidity and is removable. The hole pattern in steps of 25 mm allows mounting of several accessories.Pack quantity: Complete set for one door. H

Description: Required when fitting a door. Only needed when there was no door mounted previously. Pack quantity: 1 complete kit with hinges, rod catches and mounting accessories.

Description: Standard roof plate to cover the top of the floor standing combinable range. Material: 1.5 mm steel plate. Finish: RAL7035 structured powder coating. Pack quantity: 1 piece without mounting accessories. Mounting requirement: Standard roof plate for separate delivery. For mounting, add CCRKS mounting kit.

Description: Can be replaced by a plain or transparent door. Material: 1.5 mm steel plate.Delivery: 1 rear panel. H Description: Standard mounting accessories for the CCR and CRG roof plates. Delivery: 4 pieces M12x20, 4 pieces M6x12 and 4 pieces M12 plastic washers. Catalog No.

Description: Standard mounting accessories for the back panel. Delivery: 8 rear panel brackets, 16 pieces extrude-tite M6x12. EPDM sealing part. *Use CRPK12 for 1000 Wide Enclosures. All measurements are in mm. Description: Helps to center the door in case of uneven floor, easier closing and positioning of a heavily equipped door (cooling units, etc.). Mounted directly to the door frame on the bottom and top of the door. Highly recommended when fitting loads from 30 kg on door. Delivery: 2 plastic supports with mounting accessories. Description: To fix mounting plates to the furthest position...

Bottom plate | CBP Description: Consist of three or four pieces for easy cable access. To achieve perfect sealing around the cables use the gasket kit BG01. Material: Zinc plated steel. Pack quantity: 1 kit of two part bottom plate.

Bottom plate screws | CBPK4 4 4 4 Description: Standard mounting accessories for the back panel. Pack quantity: 8 bottom plate screws.* *For enclosures 1600 W or more, order qty of 2. All measurements are in mm. Side panel hardware | SPMKIT Spare part

Our powerful portfolio of brands: ©2026 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice. nVentHOFFMAN-CAT-N1402000-IECSparePartsNAM-USEN-2602