Catalogs >
NUOVA CEVA Automation >
SRR4 Bidirectional Radio Remote Control

SRR4 Bidirectional Radio Remote Control
3Pages

Catalog excerpts

SRR4 Bidirectional Radio Remote Control - 1

INDUSTRIAL RADIO CONTROL SRR4 4 bidirectional channel Radio Remote Control, the best solution for the transmission of signals between electrical panels  Pair of devices with 4 inputs and 4 relay outputs cross-referenced  Industrial Communication for RF 802.15.4 - 2.4 GHz band - free worldwide  Also available in 868 MHz technology LBT + AFA with external antenna  Size 96x48 mm panel mounting  “Plug & Play” Main Features The Radio Control SRR4 has been specifically designed for industrial applications where it is not possible to make a connection through the cable or the distance between the equipment that must interact with each other and it constitutes an excessive use of labor work for laying cables. With the devices SRR4 is possible to perform the transmission of signals through relay contacts in input and in output from both sides up to 4 channels. Once powered, the 2 units are coupled automatically by activating its own continuous transmission security (TX continues just on SRR4 868) and a green LED located on the front, which, lighting, determines proper operation. From this time forward, the closure of one or more inputs on a device SRR4 with their common, activate the output to a relay contact in the corresponding unit SRR4 coupled. In a situation of radio interference, excessive increase in the operating range of the devices, or simply loss of power on the part of one of the 2 units, you will have the decoupling of the units that will shut down the green LED and red LED error . In SRR4 device 868 will also disable all signals with the fall of the output relays active. Technical Features Operating distance: 2.4 GHz model (available with internal antenna) - Internal installation 60 meters - External installation in direct visual 750 meters 868 MHz modelo (available with external antenna) - Internal installation 60/150 meters - External installation in direct visual 1 km Nuova CEVA Automation. Via G.B. Signini 43. Briga Novarese (NO) ITALY Tel. +39 0322 93574 Fax +39 0322 953787 info@nuovaceva.it www.n

Open the catalog to page 1

SRR4 Bidirectional Radio Remote Control - 2

INDUSTRIAL RADIO CONTROL SRR4 868 MHz model available with frontal external antenna or magnetic removable antenna with 3 meters cable (SMA connector) POWER SUPPLY POWER CONSUMPTION FREQUENCY COMUNICATION IEEE 802.15.4 ISM 2.4 GHz Band 863-870 MHz, tecnology LBT+AFA 230 Vac – 50/60 Hz OUTPUT STATUS INDICATOR Esternal direct vision 750 mt. Internal 150 mt. INPUT STATUS INDICATOR OPERATING DISTANCE External direct vision 1 km 1 green LED comunication OK 1 red LED comunication error 1 red LED power supply OK 1 green LED comunication OK 1 red LED comunication error 1 red LED power supply OK...

Open the catalog to page 2

SRR4 Bidirectional Radio Remote Control - 3

INDUSTRIAL RADIO CONTROL SRR4 Accessories Screw terminal connector The device connection take place through practical numbered connector with terminal screw Support spring The panel fixing is easier with a support spring placed in the back of the panel Optionals Items Protective screen IP65 protection glass with door Front antenna SRR4 868 MHz Model has a front adjustable antenna Magnetic antenna with cable For applications in metallic electical panels, the antenna with cable is available only for SRR4 868 MHz Model. Nuova CEVA Automation. Via G.B. Signini 43. Briga Novarese (NO) ITALY Tel....

Open the catalog to page 3

SRR4 Bidirectional Radio Remote Control 3Pages

Catalog excerpts

All NUOVA CEVA Automation catalogs and technical brochures

SRR4 Bidirectional Radio Remote Control
3Pages