Catalogs >
NUOVA CEVA Automation >
SAGA-LB Series

SAGA-LB Series
1 / 4Pages

Catalog excerpts

INDUSTRIAL RADIO CONTROL LB SERIES Radio Remote Control with key and Stop mushroom: an alternative control for non-safety industrial application      Strenght guaranteed by a water resistant and shock resistant enclosures Modern design; pocket size and light weight (200g) Extremely long battery life: 300 hourse of continous transmission Designed for mobile and industrial application Programmable special functions Special functions settable by software:  Interlock between each couple of buttons  One-button toggle switch function  Two-button toggle switch function  Start at any pushbuttons  Continuous or not continuous transmission mode  Auto power off  Energy saving mode Frequency FM 433.0825/434.6875 Mhz Radio module: 1-channel quartz oscillator Operating temperature -45°C + 80°C Operating distance up to 100m Hamming distance >4 ID codes over 4,1 billions (32 bit) Enclosures nylon + glass fiber (IP65 equivalent) EC Regulation: EN 60950 / EMC - EN 301 489/03 - EN 61000/6/2 / - EN 300 220/3 Global approvals: F.C.C. / RSS210 / R&TTE / L.V.D. Transmitter Technical Features         L x W x H = 163 x 55 x 25 mm Weight 200 g (without battery) Power supply 2 AA size 1,5 V RF output power <4mW Max. Current Consumption 10 mA Standby current less than 1 micro A Jammed button detection Low battery indicator 1 Nuova CEVA Automation. Via G.B. Signini 43. Briga Novarese (NO) ITALY Tel. +39 0322 9

Open the catalog to page 1

INDUSTRIAL RADIO CONTROL LB SERIES Receiver Technical Features L x W x H = 161 X 74 X 52mm Weight = 1000 g (without cable) Power supply 12/24 Vac/dc - 110-220 Vac Current consumption at 24 Vac/dc - 20 mA on stand by - +50 mA for each activated relay Relay contacts 250 Vac - 10 A Insulation voltage 15 KV Accessories Receiver fixing Standard equipment with 4 shock absorber mount Wiring Standard connection cable wired Cover Standard provided with a practical case belt clip Strap A handy wrist strap for added security while using Sticker Standard interchangeable serigraph Remote type antenna...

Open the catalog to page 2

INDUSTRIAL RADIO CONTROL LB SERIES Transmitter and Receiver Standard Equipment The following kits are composed of transmitter + receiver with 1,5 m pre-wired cable + transmitter protective cover:  SAGA-L6B Receiver supply voltage 12/24 Vac/dc  SAGA-L6B-220 Receiver supply voltage 110/220 Vac 4 point shock absorber mount for demanding mobile and industriai applications Standard stickers or custom stickers for minimum order LED display of power and contact closure status L6B – 1 stop contact - 1 start contact -safety key 6 n.o. output contacts commanded by 4 double-speed buttons Receiver...

Open the catalog to page 3

INDUSTRIAL RADIO CONTROL LB SERIES Optional Items Battery charger To recharge AA 1,2V Recharge batteries 2500 mA Stickers Customized serigraph are available on demand Antennas Cable to remotely locate the antenna when the receiver is installed inside a control cabinet Dipole antenna to increase the reception up to 150m in open field Program Kit With software and copier module 4 Nuova CEVA Automation. Via G.B. Signini 43. Briga Novarese (NO) ITALY Tel. +39 0322 93574 Fax +39 0322 953787 info@nuovaceva.it www.nuovaceva.it

Open the catalog to page 4

SAGA-LB Series 1 / 4Pages

Catalog excerpts

All NUOVA CEVA Automation catalogs and technical brochures

SAGA-LB Series
1 / 4Pages