Catalogs >
NUOVA CEVA Automation >
SAGA-L Series

SAGA-L Series
1 / 4Pages

Catalog excerpts

INDUSTRIAL REMOTE CONTROLS L SERIES Compact handheld Radio Remote Control: practicality for any non-safety Industrial Application      Strenght guaranteed by a water resistant and shock resistant enclosures Modern design; pocket size and light weight (155g) Extremely long battery life: 300 hourse of continous transmission Designed for mobile and industrial application Programmable special functions Special functions settable by software  Interlock between each couple of buttons  One-button toggle switch function  Two-button toggle switch function  Start at any pushbuttons  Continuous or not continuous transmission mode  Auto power off  Energy saving mode Frequency FM 33.0825/434.6875 Mhz Radio module: 1-channel quartz oscillator Operating temperature -45°C + 80°C Operating distance up to 100m Hamming distance >4 ID codes over 4,1 billions (32 bit) Enclosures nylon + glass fiber (IP65 equivalent) EC Regulation: EN 60950 / EMC - EN 301 489/03 - EN 61000/6/2 / - EN 300 220/3 Global approvals: F.C.C. / RSS210 / R&TTE / L.V.D. Transmitter Technical Features         L x W x H = 120 x 55 x 25 mm Weight 120 g (without battery) Power supply 2 AA size 1,5 V RF output power <4mW Max. Current Consumption 10 mA Standby current less than 1 micro A Jammed button detection Low battery indicator 1 Nuova CEVA Automation. Via G.B. Signini 43. Briga Novarese (NO) ITALY Tel. +39 0322 9

Open the catalog to page 1

INDUSTRIAL REMOTE CONTROLS L SERIES Receiver Technical Features       L x W x H = 161 X 74 X 52mm Weight = 1000 g (without cable) Power supplu 12/24 Vac/dc - 110-220 Vac Current consumption at 24 Vac/dc - 20 mA on stand by - +50 mA for each activated relay Realy contacts 250 Vac - 10 A Insulation voltage 15 KV Receiver fixing Standard equipment with 4 shock absorber mount Wiring Standard connection cable wired Cover Standard provided with a practical protective cover Strap A handy wrist strap for added security while using Sticker Standard interchangeable serigraph Remote type antenna...

Open the catalog to page 2

INDUSTRIAL REMOTE CONTROLS L SERIES Transmitter and Receiver Standard Equipment The following kits are composed of transmitter + receiver with 1,5 m pre-wired cable + transmitter protective cover:  SAGA-L4 Receiver supply voltage 12/24 Vac/dc  SAGA-L4-220 Receiver supply voltage 110/220 Vac 4 point shock absorber mount for demanding mobile and industriai applications Standard stickers or custom stickers for minimum order LED display of power and contact closure status L4 – 1 stop contact · 1 start contact 2 n.o. output contacts commanded by 2 single-speed buttons Receiver unit SAGA-L4-RX...

Open the catalog to page 3

INDUSTRIAL REMOTE CONTROLS L SERIES Optional Items Battery charger To recharge AA 1,2V Recharge batteries 2500 mA Antennas Cable to remotely locate the antenna when the receiver is installed inside a control cabinet Dipole antenna to increase the reception up to 150m in open field 4 Nuova CEVA Automation. Via G.B. Signini 43. Briga Novarese (NO) ITALY Tel. +39 0322 93574 Fax +39 0322 953787 info@nuovaceva.it www.nuovaceva.it

Open the catalog to page 4

SAGA-L Series 1 / 4Pages

Catalog excerpts

All NUOVA CEVA Automation catalogs and technical brochures

SAGA-L Series
1 / 4Pages