Anemometer BASIC with Integrated Alarms for Tower Cranes The anemometer alarms integrated SAG105WR has been designed and built for industrial machinery where it is needed the constant monitoring of wind speed and timely reporting of exceeding the permitted levels. Compact, waterproof, rugged and reliable, meets the requirements specified by the regulations EN14439 for safety on Tower Cranes. It installs easily with the bracket included in the supply, or by 3 magnets that permit anchored to any metal structure. The power supply is sufficient to put a voltage comprised between 48 and 400 VAC, in fact, the electronic card has a multi input voltage that is self-suited. For all cranes and self-propelled vehicles that only have power with dc, is available SAG105WR model in 12 and 24 VDC. When power is under control of the machine START general, the anemometer is ready for use. Whenever you put in a state of ignition, the equipment perform a 3 seconds test operation of its alarms after which it will be ready for the measurement and reporting alarms according to the settings "dip-switch" thresholds (see specific techniques). The alarms occurs by means of high-brightness LED and BUZZER high yield, both placed at the bottom of the apparatus for better viewing. The device is programmed to give a pre-alarm signaling via LEDs yellow / orange working intermittently together to audible warning buzzer and a second alarm signal via the LEDs of red color which in this case work permanently with continuous emission of audible alarm buzzer.               Compact Hermetic Strong Aesthetic Reliable Economic Easy installation Supplied with fixing flanges and magnets Available supply voltage : 48-400Vac switching or 12-24Vdc 4 activating levels for pre-alarm and alarm Designed for brusque handling Verified in wind tunnel Patented 2 years guarantee High brightness LED flashing for visual indication of alarms BUZZER high-performances sound for the sound signal alarms 1 Nuova CEVA Automation. Via G.B. Signini 43. Briga Novarese (NO) ITALY Tel. +39 0322 93574 Fax +39 0322 953787 info@nuov

Technical Features Patented System Anemometer with alarm beacon commanded by 2 pre-defined thresholds. Supplied with fasteners (magnets and flanges). Thanks to Its special design, the rotor doesn't generate any perturbation in the surrounding air flow in such a way as to preserve the excellent accuracy of the instrument. The employment of magnetic sensors, allows the access of the wind speed signal inside the anemometer without compromising its waterproof features. Operation To increase safety, it's possible to reduce activating values of the alarms. (see figure 1). Pre-alarm Yellow lamp and...

Mechanical Features The anemometer is constituted by a rotor in plastic resistant to UV rays, at low temperatures and hail. Rotating on ball bearings, drives a magnetic contact generating 4 pulses per revolution. The aerodynamic shape, has been specifically designed to prevent the formation of ice on the surface of the structure and around the rotor.     degree of protection of IP65 operating temperature -20 ° + 60 ° C dimensions 195 x 150 x 270 mm weight 1.5 kg excluding power cable Electrical Features At the bottom are easily visible the two crowns of high-brightness LEDs that generate...

Accessories Anchor magnets Supplied in the kit are included magnets anchor to facilitate the installation in the presence of flat surfaces and not suitable for the clamping Brackets Alternatively, are included in the kit 2 mounting brackets to be fixed to the metal structure as crossbars or tubular uprights Flanges Flanges allow you to attach the unit on uneven elements, with maximum dimensions of approx. 63 mm height and 45mm width. Cable entry At the bottom there are inputs to cable gland for connecting power supply and optional outputs. 4 Nuova CEVA Automation. Via G.B. Signini 43. Briga Novarese...