Pushbuttons Remote Controls - SAGA-L10_1 / SAGA-L10
4Pages

{{requestButtons}}

Catalog excerpts

Pushbuttons Remote Controls - SAGA-L10_1 / SAGA-L10 - 1

INDUSTRIAL RADIO CONTROL L10 SERIES 8 Pushbuttons Radio Remote Control: the first step for self-erecting cranes’ and bridge cranes’ control      Strenght guaranteed by a water resistant and shock resistant enclosures Modern design; pocket size and light weight (200g) Extremely long battery life: 300 hourse of continous transmission Designed for mobile and industrial application Programmable special functions Special functions settable by software:  Interlock between each couple of buttons  One-button toggle switch function  Two-button toggle switch function  Start at any pushbuttons  Continuous or not continuous transmission mode  Auto power off  Energy saving mode  Control of DUAL MOTORS systems  Up to 4 speeds commanded by a single button Frequency FM 433.0825/434.6875 Mhz Radio module: 1-channel quartz oscillator Operating temperature -45°C + 80°C Operating distance up to 100m Hamming distance >4 ID codes over 4,1 billions (32 bit) Enclosures nylon + glass fiber (IP65 equivalent) EC Regulation: EN 60950 / EMC - EN 301 489/03 - EN 61000/6/2 / - EN 300 220/3 Global approvals: F.C.C. / RSS210 / R&TTE / L.V.D. Transmitter Technical Features          L x W x H = 163 x 49 x 45 mm Weight 200 g (without battery) Power supply 2 AA size 1,5 V RF output power <4mW Max. Current Consumption 10 mA Standby current less than 1 micro A Jammed button detection Low battery indicator Start key switch and stop mushroom button 1 Nuova CEVA Automation. Via G.B. Signini 43. Briga Novarese (NO) ITALY Tel. +3

Open the catalog to page 1
Pushbuttons Remote Controls - SAGA-L10_1 / SAGA-L10 - 2

INDUSTRIAL RADIO CONTROL L10 SERIES Receiver Technical Features L x W x H = 167 x 154 x 88 mm Weight = 1400 g (without cable) Power supply 12/24 Vac/dc - 48-220 Vac Current consumption at 24 Vac/dc - 31 mA on stand by – 128 mA ON - 16 mA for each activated relay Realy contacts 250 Vac - 10 A Insulation voltage 15 KV Accessories Receiver fixing Standard equipment with 4 shock absorber mount Wiring Standard connection cable wired Cover Standard provided with a practical case belt clip Strap A handy wrist strap for added security while using Stickers Standard interchangeable serigraph Remote...

Open the catalog to page 2
Pushbuttons Remote Controls - SAGA-L10_1 / SAGA-L10 - 3

INDUSTRIAL RADIO CONTROL L10 SERIES Transmitter and Receiver Standard Equipment The following kits are composed of transmitter + receiver with 1,5 m pre-wired cable + transmitter protective cover:  SAGA-L10-1 Receiver supply voltage 12/24 Vac/dc  SAGA-L10-1-220 Receiver supply voltage 110/220 Vac Available in different configurations: 24-6-8 buttons 1 point shock absorber mount L10-1 – stop with 2 safety contacts 1 start contact - 8 n.o. output contacts commanded by 8 single-speed buttons The following kits are composed of transmitter + receiver with 1,5 m pre-wired cable + transmitter...

Open the catalog to page 3
Pushbuttons Remote Controls - SAGA-L10_1 / SAGA-L10 - 4

INDUSTRIAL RADIO CONTROL L10 SERIES Optional Items Battery charger To recharge AA 1,2V Recharge batteries 2500 mA Stickers Customized serigraph are available on demand Antennas Cable to remotely locate the antenna when the receiver is installed inside a control cabinet Dipole antenna to increase the reception up to 150m in open field Program Kit With software and copier module 4 Nuova CEVA Automation. Via G.B. Signini 43. Briga Novarese (NO) ITALY Tel. +39 0322 93574 Fax +39 0322 953787 info@nuovaceva.it www.nuovaceva.it

Open the catalog to page 4

All NUOVA CEVA Automation catalogs and technical brochures

  1. ANTC-V1

    4 Pages

  2. Winch Cranes

    1 Pages

  3. Head Cranes

    1 Pages

  4. Tower Cranes

    1 Pages

  5. ANTC-V2.2

    4 Pages

  6. ANTC-V1

    4 Pages

  7. ARES Series

    2 Pages

  8. Saga V6

    3 Pages

  9. WAVE series

    2 Pages

  10. ZEUS series

    2 Pages

  11. ANTC-D1

    3 Pages

  12. ANTC-IDV32

    3 Pages

  13. ANTC-09

    3 Pages

  14. SAG105WR

    4 Pages

  15. WV4403

    3 Pages

  16. WM44-DRM

    4 Pages

  17. antc-idv

    2 Pages