Catalogs >
NUOVA CEVA Automation >
Pushbuttons Remote Controls - SAGA-K1 / SAGA-K2 / SAGA-K2_8

Pushbuttons Remote Controls - SAGA-K1 / SAGA-K2 / SAGA-K2_8
4Pages

Catalog excerpts

Pushbuttons Remote Controls - SAGA-K1 / SAGA-K2 / SAGA-K2_8 - 1

RADIO REMOTE CONTROL SAGA K1-K2 series Safety 7-8 pushbuttons Radio Remote Control C at.4: redundant controls in double transmission, high quality level      Emergency stop circuit in compliance with safety category 4 “stop & control” EN ISO 13849-1 Redundant system with double CPU and watchdog control associated with each processor Jammed button detection Remote pairing of a new transmitter with a previously installed receiver Multi-operator “firstcome, first serve operation” Pitch & catch function to allow for transfer of operator control Emission power adjustable by software Interference detection system with automatic retuning Special control function for operation of material handling magnets Receiver built-in horn (alarm) Special functions settable by software  User password  Auto power off  Interblock between each couple of buttons  Adjustable delay time for output activation  1 or 2 button toggle switch function  Control of dual motor system  Dual button release for material handling magnets Frequency FM 433.0825/433.6875 Mhz Radio 70-channel PLL radio module Operating Temperature -45° +85° Operating Distance 100 m Hamming Distance > 4 ID Code Over 1 million sets Channel Spacing 25 KHZ Enclosures IP65 glass reinforced nylon Cover Plastic standard accessories Armonized Rules EN/IEC/60950-1 EN60204/32 – EMC: EN 301 489/01 e 03 - EN 300 220/2-73/72/CEE – 93/68/CEE – 89/336/CEE World Approvals E.C.C. - RSS210 - R&TTE - L.V.D. Transmitter Technical Features          L x W x H =163x49x45 mm Weight: 210 g (without batteries) Power Supply 4 AA size batteries Output power < 10 mW Max current consumption 30mA Standby current less than 1µA Jammed button detection Low battery indicator Start key switch & stop mushroom button 1 Nuova CEVA Automation. Via G.B. Signini 43. Briga Novare

Open the catalog to page 1

Pushbuttons Remote Controls - SAGA-K1 / SAGA-K2 / SAGA-K2_8 - 2

RADIO REMOTE CONTROL SAGA K1-K2 series Receiver Technical Features      L x W x H = 167x154x88 mm Weight: 2100 g (without cable) Power Supply 12/24 Vac/dc – 24/42/230 Vac 48/110/220 Vac – 48/220/380 Vac Current consumption at 24Vac/dc: 58mA in standby mode – 172mA with start relay activated + 18mA more for each realy Output contacts 250 Vac – 5A Accessories Receiver fixing Standard equipment with 4 shock absorber mount Wiring Standard connection cable wired Cover Standard provided with a practical case belt clip Strap A handy wrist strap for added security while using Stickers Standard...

Open the catalog to page 2

Pushbuttons Remote Controls - SAGA-K1 / SAGA-K2 / SAGA-K2_8 - 3

RADIO REMOTE CONTROL SAGA K1-K2 series Transmitter and Receiver Standard Equipment The following kits are composed of Transmitter + Receiver with 1,5m prewired cable + Transmitter protective cover:  SAGA-K1 Receiver supply voltage 12/24 Vac/dc  SAGA-K1-220 Receiver supply voltage 48/110/220 Vac Available in different configurations: 2-4-6-7 buttons Single shock mount designed K1 – stop with 2 safety contacts – start + 1 alarm contact – 7 n.o. output contacts commanded by 7 single-speed buttons The following kits are composed of Transmitter + Receiver with 1,5m prewired cable + Transmitter...

Open the catalog to page 3

Pushbuttons Remote Controls - SAGA-K1 / SAGA-K2 / SAGA-K2_8 - 4

RADIO REMOTE CONTROL SAGA K1-K2 series Optional Items Stickers Customized serigraph are available on demand Antennas Cable to remotely locate the antenna when the receiver is installed inside a control cabinet Dipole antenna to increase the reception up to 150m in open field Program Kit With software and copier module 4 Nuova CEVA Automation. Via G.B. Signini 43. Briga Novarese (NO) ITALY Tel. +39 0322 93574 Fax +39 0322 953787 info@nuovaceva.it www.nuovaceva.it

Open the catalog to page 4