Catalog excerpts
Main Features • • • Housing In aluminium Positioning Vertical axis Cable entry To connect rings to the clamp, through the tube and to the brush-holders cable entry through the PG 21 Brushes 20 A copper-graphite brushes / silver-graphite for signals, 30 A blade or copper-graphite and 50 A blade or copper-graphite Executions From 6 to 15 rings 20 A, from 4 to 14 rings 30 A and from 4 to 10 rings 50 A Armonized rules 2014/35/UE - 2014/30/UE - 2006/42/CE – RoHS 2011/65/UE Marking CE Electrical Features • • • • • • Nominal voltage 660 V ac - dc Nominal current Ith 20 A - 30 A - 50 A Protection degree IP 55 Max rotating speed 30 revs / min Test voltage 2,5 kV Operating temperature - 20 °C ÷ + 60 °C Availability on demand: • Mixed versions with 20 A / 30 A / 50 A rings • Signal versions with gold or silver rings Standard Executions Items G PRS C4L 4 G PRS D4L 4 192 G PRS C6L 6 192 G PRS C8L 8 G PRS D6L 6 252 G PRS C10L 10 252 G PRS C12L 12 G PRS D8L 8 312 G PRS C14L 14 G PRS D10L 10 312 For 30 A and 50 A executions, please omit the final “L” letter of the code item if you need copper/graphite brushes 6 9 12 15 1 Nuova CEVA Automation. Via G.B. Signini 43. Briga Novarese (NO) ITALY Tel. +39 0322 93574 Fax +39 0322 95378
Open the catalog to page 1For Your Safety The PRS slipring has to be installed only by qualified personnel in compliance with current safety standards. Power to the machine must be turned off before carrying out cabling. Connections are to be made in compliance with the wiring scheme of the controlled equipment. After installation has been completed, the installer is required to check that all commands are working properly. Avoid prolonged contact with oils and acids when using the equipment, as these may damage the products. 1) Using the locknuts (Ref. 11), attach the central pipe (Ref. 3) to a minimum 3 mm thick...
Open the catalog to page 2All NUOVA CEVA Automation catalogs and technical brochures
-
ANEMO4403 V3 RELAY-ALARM
2 Pages
-
ANEMO4403 | HZ
2 Pages
-
ANTC-V1
4 Pages
-
WM44-EVO11 V3
2 Pages
-
ANEMO4403 V3 RELAY-ALARM
2 Pages
-
ANEMOSCOPE ANTC_D2.2
2 Pages
-
Winch Cranes
1 Pages
-
Derrick Cranes
1 Pages
-
Gantry Cranes
1 Pages
-
Head Cranes
1 Pages
-
Tower Cranes
1 Pages
-
EXD (ATEX) type slip rings
2 Pages
-
ANTC-V2.2
4 Pages
-
ANTC-V1
4 Pages
-
PRR-ROLLER type slip rings
2 Pages
-
FRM Rotary Limit Switch
6 Pages
-
PME type slip rings
2 Pages
-
SAG105WR-5142-2SC
5 Pages
-
ANEMO4H25 Heated
2 Pages
-
ANEMO4403-Frequency ouput
3 Pages
-
ARES Series
2 Pages
-
Large L15- Large L99
1 Pages
-
Small S3- Small S6
1 Pages
-
Saga V6
3 Pages
-
SAGA-L Series
4 Pages
-
SAGA-LB Series
4 Pages
-
FRS rotary limit switch
5 Pages
-
PMP type slip rings
2 Pages
-
PMS type slip rings
2 Pages
-
PRG-90 type slip rings
2 Pages
-
PRM type slip rings
1 Pages
-
WAVE series
2 Pages
-
ZEUS series
2 Pages
-
ANTC-D1
3 Pages
-
Wind Analysis
3 Pages
-
WM44-P control unit
5 Pages
-
FCN rotary limit switch
6 Pages
-
ANEMO4403 - Analogic Output
3 Pages
-
ANEMO4403-RF-BAT Wireless
6 Pages
-
ANTC-IDV32
3 Pages
-
ANTC-09
3 Pages
-
PZG type slip rings
2 Pages
-
PSP type slip rings
1 Pages
-
PSG 200 type slip rings
1 Pages
-
PSG 160 type slip rings
1 Pages
-
PSG 130 type slip rings
1 Pages
-
PRP type slip rings
2 Pages
-
SAG105WR
4 Pages
-
WM44-SS Small Control Unit
4 Pages
-
WV4403
3 Pages
-
WM44-DRM
4 Pages
-
antc-idv
2 Pages