Catalogs >
NUOVA CEVA Automation >
PRR-ROLLER type slip rings

PRR-ROLLER type slip rings
2Pages

Catalog excerpts

Main Features • • • • • • • • Housing In aluminium Positioning Vertical axis Connections Rings wired with 2 m. long cable Cable entry To connect rings to the clamp, through the tube and to the brush-holders cable entry through the M 20 Brushes 10 A copper-graphite brushes Executions From 6 to 24 rings 10 A Armonized rules 2014/35/UE - 2014/30/UE - 2006/42/CE – RoHS 2011/65/UE Marking CE Electrical Features • • • • • • Nominal voltage 400 V ac - dc Nominal current Ith 10 A Protection degree IP 65 Max rotating speed 100 revs / min Test voltage 2 kV Operating temperature - 20 °C ÷ + 60 °C Standard Series Accessories available upon request: • Absolute Encoder • Passage for air 1 Nuova CEVA Automation. Via G.B. Signini 43. Briga Novarese (NO) ITALY Tel. +39 0322 93574 Fax +39 0322 953787

Open the catalog to page 1

For Your Safety The ROLLER slipring has to be installed only by qualified personnel in compliance with current safety standards. Power to the machine must be turned oﬀ before carrying out cabling. Connections are to be made in compliance with the wiring scheme of the controlled equipment. After installation has been completed, the installer is required to check that all commands are working properly. Avoid prolonged contact with oils and acids when using the equipment, as these may damage the products. 1) Using the locknuts (Ref. 27), attach the central pipe (Ref. 12) to a minimum 3 mm...

Open the catalog to page 2

PRR-ROLLER type slip rings 2Pages

Catalog excerpts

All NUOVA CEVA Automation catalogs and technical brochures

PRR-ROLLER type slip rings
2Pages