Catalogs >
NUOVA CEVA Automation >
PMS type slip rings

PMS type slip rings
2Pages

Catalog excerpts

Main Features • Housing In aluminium, suitable for installation in inside or outside area Positioning Vertical axis Connections Rings cabled with 2 m. long cable Cable entry Inside the fastener pipe for the rings and through the PG21 cable entry for the brush holders Brushes 20 A or 50 A copper-graphite Executions From 10 to 30 rings 20 A - mixed executions 20 A / 50 A Armonized rules 2014/35/UE - 2014/30/UE 2006/42/CE – RoHS 2011/65/UE Directives Marking CE Electrical Features • • • • • • Rated Voltage 660 V ac - dc Rated Current Ith 20 A - 50 A Degree protection IP 55 Maximum speed 30 rpm Test Voltage 2,5 kV Operating Temperature - 20 °C ÷ + 60 °C Standard Executions Availability on demand: • Types with 50 A rings • Mixed executions with 20 A / 50 A rings • Signal versions with gold or silver ring • Flat bottom version without housing pipe It is also possible to apply: • Mercotac • Absolute Encoder • Micro-switches application • One passage for air 1 Nuova CEVA Automation. Via G.B. Signini 43. Briga Novarese (NO) ITALY Tel. +39 0322 93574 Fax +39

Open the catalog to page 1

For Your Safety The PMS slipring has to be installed only by qualified personnel in compliance with current safety standards. Power to the machine must be switched off before carrying out cabling. Connections are to be made in compliance with the wiring scheme of the controlled equipment. After installation has been completed, the installer is required to check that all commands are working properly. Avoid prolonged contact with oils and acids when using the equipment, as these may damage the products. 1) Using the locknuts (Ref. 27), attach the central pipe (Ref. 12) to a minimum 3 mm...

Open the catalog to page 2

PMS type slip rings 2Pages

Catalog excerpts

All NUOVA CEVA Automation catalogs and technical brochures

PMS type slip rings
2Pages