Catalogs >
NUOVA CEVA Automation >
PMP type slip rings

PMP type slip rings
1 / 2Pages

Catalog excerpts

General Features Housing Metallic Positioning Vertical axis Connections Rings wired with 2 m. long cable Cable entry With single-pole wires connected to the rings and through two pipe unions 3/4” Gas to the brush-holders Brushes 20 A or 50 A copper-graphite/silver-graphite for signals Executions From 18 to 42 rings 20 A - mixed executions 20 A / 50 A Armonized rules 2014/35/UE - 2014/30/UE - 2006/42/CE – RoHS 2011/65/UE Directives Marking CE Electrical Features Rated Voltage 660 V ac - dc Rated Current Ith 20 A - 50 A Degree protection IP 42 Maximum speed 30 rpm Test Voltage 2,5 kV Operating Temperature - 20 °C ÷ + 60 °C Standard Executions Items Availability on demand: • Types with 50 A rings • Mixed executions with 20 A / 50 A rings • Signal versions with gold or silver ring It is also possible to apply: • Mercotac • Absolute Encoder • Micro-switches application • One passage for air 1 Nuova CEVA Automation. Via G.B. Signini 43. Briga Novarese (NO) ITALY Tel. +39 0322 93574 Fax +39

Open the catalog to page 1

For Your Safety The PMP slipring has to be installed only by qualified personnel in compliance with current safety standards. Power to the machine must be turned oﬀ before carrying out wiring. Connections are to be made in compliance with the wiring scheme of the controlled equipment. After installation has been completed, the installer is required to check that all commands are working properly. Avoid prolonged contact with oils and acids when using the equipment, as these may damage the products. 1) The main plate (Ref. 5) is made using two holes of Ø 10.5 mm situated on the plate itself...

Open the catalog to page 2

PMP type slip rings 1 / 2Pages

Catalog excerpts

All NUOVA CEVA Automation catalogs and technical brochures

PMP type slip rings
1 / 2Pages