Catalogs >
NUOVA CEVA Automation >
PME type slip rings

PME type slip rings
1 / 2Pages

Catalog excerpts

General Features • • • • • • • • Housing In aluminium with insulating thermoplastic band Positioning Vertical axis, assembly on the base plate by means of 2 screws M10 Connections Rings wired with 2 m. long cable Cable entry With single-pole wires connected to the rings and through pipe unions M32 to the brushholders Brushes 20 A, 50 A and 100 A in coppergraphite Executions From 20 to 60 rings 20 A - mixed executions 20/50/100 A Armonized rules 2014/35/UE - 2014/30/UE 2006/42/CE – RoHS 2011/65/UE Directives Marking CE Electrical Features • • • • • • Rated Voltage 660 V ac - dc Rated Current Ith 20 A - 30 A - 50 A Degree protection IP 65 Maximum speed 30 rpm Test Voltage 2,5 kV Operating Temperature - 20 °C ÷ + 60 °C Standard Executions Items Availability on demand: • Mixed executions with 100 A, 50 A and 20 A • Types with appropriate rings for signals It is also possible to apply: • Mercotac • Absolute Encoder • Micro-contact • Step Air 1 Nuova CEVA Automation. Via G.B. Signini 43. Briga Novarese (NO) ITALY Tel. +39 0322 93574 Fax +39 0322

Open the catalog to page 1

For Your Safety Connections are to be made in compliance with the wiring scheme of the controlled equipment. After installation has been completed, the installer is required to check that all commands are working properly. Avoid prolonged contact with oils and acids when using the equipment, as these may damage the products. 1) The base plate (ref. 1) is made by using fork fastons with interaxis 260 mm. and screws M10. Two holes of ø 9 mm., 13 mm. deep on the flange (Ref. 7) are used for the rings. We recommend the coupling to be made with slack to take up any possible runout during...

Open the catalog to page 2

PME type slip rings 1 / 2Pages

Catalog excerpts

All NUOVA CEVA Automation catalogs and technical brochures

PME type slip rings
1 / 2Pages