General Features • • • • • • • • • • • Housing In aluminium Positioning Vertical axis, with the cover assembled on the top Connections Rings and brushes are wired with 2m long cable Cable entry Thanks to a cable clamp for the rings and through the lateral cable clamp entry for the brush holders Anti-condensation It’s possible to use an anti-condensation heater (on demand) Brushes Copper-graphite Executions Mixed executions 34A-7A Directives 2014/35/UE - 2014/34/UE - 2014/30/UE - 2006/42/CE Global approvals: - CEI EN 60079-0 - CEI EN 60079-31 - UNI CEI EN ISO/IEC 80079-34 - UNI EN 1127-1 - CEI EN 60529 - CEI EN 60529/A1 Quality: BVI11 ATEX0012 Q - BVI09 ATEX0046 Q Marking CE Electrical Features • • • • • • Nominal Voltage 400 V ac - dc Nominal Current Ith 34 A - 7 A Degree protection IP 65 Maximum speed 50 rpm Test Voltage 2,5 kV Operating Temperature - 20 °C ÷ + 40 °C Standard Executions Items Applications: Proof to areas with potentially explosive dust atmosphere, ZONE 21 and 22 1 Nuova CEVA Automation. Via G.B. Signini 43. Briga Novarese (NO) ITALY Tel. +39 0322 93574 Fax +39 0322 9537

For Your Safety The EXD slipring has to be installed only by qualified personnel in compliance with current safety standards. Power to the machine must be switched off before carrying out cabling. Connections are to be made in compliance with the wiring scheme of the controlled equipment. After installation has been completed, the installer is required to check that all commands are working properly. Avoid prolonged contact with oils and acids when using the equipment, as these may damage the products. 1) Using the locknuts (Ref. 27), attach the central pipe (Ref. 12) to a minimum 3 mm thick...