
Catalog excerpts

INDUSTRIAL REMOTE CONTROLS Wireless data transmission The M8 transmitter is designed for mounting on a DIN rail, and is the ideal solution for creating high-safety wireless link enabling the transmission of commands and status signals. Sensors, RS232 and RS485 ports can be inputs for a M8 transmitter becoming outputs at a MAC receiver thus providing a status or alarm signals reporting. In the same way, control panel commands can be radio transmitted to the receiver for the remote control of a machine Until 100 meters of operating distance This device should be mounted inside a control box for clean and trouble free installation, and is supplied complete with an external antenna for the radio proportional inputs, Start, Stop and Frequency Change features are available as for traditional radio control commands. The double transmission version can manage the feedback information displaying it on a LCD screen or activating some ransmitter built in relays. Extractable terminal blocks with marker strips: order and simplicity A control box always kept in order, ease of access for maintenance purpose, quick installation: those are the main advantages deriving from extractable terminal block with marker strips you can find on M8 Comunication port: ready to listen The M8 transmitting unit supports the RS485 communication protocol that allows the data acquisition from sensors or external electronic devices. Extractable fuses: built in functionality In order to simplify installation and maintenance procedures, M550 series has designed the electronic boards of its products keeping an easy access to the protection devices. External antenna with SMA plug: radio communication is guaranteed M8 transmitting unit communicates with its receiver thanks to an external antenna that can be easily mounted in the most suitable position for guaranteeing a reliable radio link. 28010 BRIGA NOVARESE (NO) - ITALY info@nuovaceva.it www.nuovaceva.it
Open the catalog to page 1All NUOVA CEVA Automation catalogs and technical brochures
-
ANEMO4403 V3 RELAY-ALARM
2 Pages
-
ANEMO4403 | HZ
2 Pages
-
ANTC-V1
4 Pages
-
WM44-EVO11 V3
2 Pages
-
ANEMOSCOPE ANTC_D2.2
2 Pages
-
Winch Cranes
1 Pages
-
Derrick Cranes
1 Pages
-
Gantry Cranes
1 Pages
-
Head Cranes
1 Pages
-
Tower Cranes
1 Pages
-
EXD (ATEX) type slip rings
2 Pages
-
ANTC-V2.2
4 Pages
-
PRR-ROLLER type slip rings
2 Pages
-
FRM Rotary Limit Switch
6 Pages
-
PME type slip rings
2 Pages
-
SAG105WR-5142-2SC
5 Pages
-
ANEMO4H25 Heated
2 Pages
-
ANEMO4403-Frequency ouput
3 Pages
-
ARES Series
2 Pages
-
Large L15- Large L99
1 Pages
-
Small S3- Small S6
1 Pages
-
Saga V6
3 Pages
-
SAGA-L Series
4 Pages
-
SAGA-LB Series
4 Pages
-
FRS rotary limit switch
5 Pages
-
PMP type slip rings
2 Pages
-
PMS type slip rings
2 Pages
-
PRG-90 type slip rings
2 Pages
-
PRM type slip rings
1 Pages
-
WAVE series
2 Pages
-
ZEUS series
2 Pages
-
ANTC-D1
3 Pages
-
Wind Analysis
3 Pages
-
WM44-P control unit
5 Pages
-
FCN rotary limit switch
6 Pages
-
ANEMO4403 - Analogic Output
3 Pages
-
ANEMO4403-RF-BAT Wireless
6 Pages
-
ANTC-IDV32
3 Pages
-
ANTC-09
3 Pages
-
PZG type slip rings
2 Pages
-
PSP type slip rings
1 Pages
-
PSG 200 type slip rings
1 Pages
-
PSG 160 type slip rings
1 Pages
-
PSG 130 type slip rings
1 Pages
-
PRS type slip rings
2 Pages
-
PRP type slip rings
2 Pages
-
SAG105WR
4 Pages
-
WM44-SS Small Control Unit
4 Pages
-
WV4403
3 Pages
-
WM44-DRM
4 Pages
-
antc-idv
2 Pages