Anemometer cups with multiple outputs for industry-standard SIT certificate ANTC-V2.2 is an anemometer, which meets every requirement of use in electronics. Is in fact equipped with its own programmable logic and, thanks to a large range of power supply, from 10 to 30Vdc, can be used for any onboard detection of wind turbines in the presence of sources of power from batteries 12 and 24 vdc. Its output signal can be configured for pulse output, voltage output 0-5 / 15 / 0-10 / 2-10 Vdc, current output 0-20 / 4-20 mA. It can be connected through the various outputs available depending on the model directly to PLC and / or board electronic market, tachometers WM44P as the model of our product range. The body of the rotor is machined aluminum. The head rotates on ball bearings. The cups are made of nylon shock-absorbent and easily interchangeable. It also features a convenient connector for connection. The count rate is via optical transducer, a digital encoder with 12 pulses per revolution. It is produced in the following versions: • • • • Impulsive Frequency output (Hz) Analogic Voltage output 0-5 / 0-10 Vdc Analogic Voltage output 1-5 / 2-10 Vdc Analogic Current output 0-20 / 4-20 mA Each anemometer is equipped with Nylon Cups interchangeable, stainless steel support, 3 pin to solder jack connector. EACH TRANSDUCER IS TESTED IN A WIND TUNNEL AND EQUIPPED WITH A CALIBRATION CERTIFICATE. It runs on request, a periodic calibration and calibration product. The Anemometer ANTC-V2.2 has been specifically designed for industrial applications such as: • Cranes and Mobile Cranes • Buildings and general structures • Photovoltaic solar trackers • Wind turbines • Weather Stations • Irrigation systems • Automated greenhouses • Cable cars for ski plants • Cannons snow • Telescopic cranes • Platforms self-mounting • Structures for playgrounds • Ornamental fountains • Pressostatic structures • Highway tunnels and viaducts 1 Nuova CEVA Automation. Via G.B. Signini 43. Briga Novarese (NO) ITALY Tel. +39 0322 93574 Fax +39 0322 953787

Main Features • • • • • • Robust, reliable, suitable for heavy duty industrial use in extreme conditions Range of use 2-200km/h Stainless steel ball bearings Body in anodized aluminium Jack connector Stainless steel support Mechanical Features • • • • • • • • • IP55 degree protection (IP56 with M12 connector) Operating temperature -20° + 85°C Stock temperature -40° + 125°C Overall size on a side draw Weight 300 g connection cable excluded Measurement range from 2 to 200 km/h Medium error 0,06 % Standard deviation error 1,01 % Analisys done in a wind tunnel with a 0 to 200 m/s wind speed exceeding...

Special Connector M12 5 PINS Model Operation ANTC-V2.2 anemometer can be configured by manufacturer on the following features: Model Configurable outputs Frequency output Relation between Wind Speed – Frequency output. The output pulses are proportional to the wind speed in relation with the graphic in the right column. Voltage output Relation between Wind Speed – Voltage output. The voltage output is proportional to the wind speed in relation with the graphic in the right column. These follow are configurable sets: 0-5 / 1-5 / 0-10 / 2-10 Vdc The graph to the side is represented in function...

Accessories Nylon Cups Reinforced by the hail, resistant from -40°C to +120°C, diam. 30mm, interchangeable. In the kit are included 3+1 stock cups Connector 3 poles to be weld Stainless-steel bracket Already assembled. Dimensions: height 42mm, width 39mm. Optional Items Connecting cable Transducer connection cable provided in the required lenght Cable Cable welding and pre-wiring It is possible to match the anemometer with a programmable display with 2 contact relay output to visualize data in real time and signalize allarm. 4 Nuova CEVA Automation. Via G.B. Signini 43. Briga Novarese (NO) ITALY...